little six

[Da Natti]

my 3.8 liter build 2001 mustang v6
i started with a 94 supercoupe block
bored 30 over forged pistons
forged H beam rods
balanced blueprinted
forged factory sc crank

[98stangv6]

Love the Focus, but can't wait to see this thing back on the road!

[Da Natti]

Thanks, yeah it will be nice to get this thing back out of moth balls!

[Da Natti]

old tread but same build! Over the last weekend I built a sheet metal box upper intake out of aluminum. I have never tig welded aluminum before it's not bad for about 3 practice passes before trying it!

[2Fast4You]

You may want to have it pressure tested prior to using it, keep it going.

[Da Natti]

I am going to pressure test it and still have a couple more welds to do to the bottom! I have to cut a hole in the top to unbolt it from the lower and that 1/4" plate on top is going to be a lid! It's a work in progress.

[Stanger00]

I am glad to see someone else build there six besides me. How did that intake turn out for you?

[redfirepearlgt]

I am glad to see someone else build there six besides me. How did that intake turn out for you?

Still can't get over how good that car sounds. Sounded very close to a V8. You should let Adam tune it up for you. The guy knows his stuff. He has tuned for some pretty picky car owners who rave of his ability.

[SJSlots]

yeah that 4.3 sounds more like 4.6 at idle than I thought it would. You hear the 3.8 soul scream out at high revs but who cares... its cool!!

[Stanger00]

I will when I get the tt's on it. I can't see puting the money into it now for a tune and need another one soon. I just hope I can get by on 42lb injectors instead of the 60lbs injectors.


Dare to be Different

[Stanger00]

old tread but same build! Over the last weekend I built a sheet metal box upper intake out of aluminum. I have never tig welded aluminum before it's not bad for about 3 practice passes before trying it!

where is your iac motor?

[Stanger00]

http://www.facebook.com/media/set/?set=a.100610106627859.1109.100000366107941&type=3#!/photo.php?fbid=210348732320662&set=a.100610106627859.1109.100000366107941&type=3&theater
Here is the pictue of my intake...

[Da Natti]

your intake looks pretty sweet the iac you can see in this pic! At the bottom of the trottle body plenum sorry for the delay response!
http://www.stangbangerz.com/forums/attachment.php?attachmentid=22117&d=1319765231

[Stanger00]

Yeah I can see it now that you pointed it out.

[akagreg3]

i got sct x3 i would sell cheap, i paid 300 for it about 2 years ago, make me a offer if your interested, its got 2 custom tunes and the sct tune and of course u\you can tune your self

[Stanger00]

i have the predator, but I have been looking at another piggyback tuning software that will allow me to adjust everything a shop could do

[akagreg3]

i have the predator, but I have been looking at another piggyback tuning software that will allow me to adjust everything a shop could do

check out the sct x3, you might like its features http://www.sctflash.com/showsctproducts.php?Prod=X3
not sure what the predator does but id take 200obo
and with the sct its real simple to log your data and send it to someone like adam to make you a custom tune :-) tunes that are on it are from www.MorePowerTuning.com for my 4.6 with pi heads/pi cam/pi intake/long tubes headers/h pipe/slp catback/motoblue underdrive pully/bbk 78 tb, it ran damn good 12 na, all is still for sell all but the catback

[Stanger00]

How is your engine coming along? I can't wait to hear it

[Stanger00]

I can set you up with an intake too i you would like.

[Stanger00]

http://www.youtube.com/watch?v=JOHJxBUzh4s here is an exhaust clip if you wanna see it.

[Stang 38L]

Man I miss my six.