92 Gould #15 GT $8500 Obo

[draggin50]

I just got rid of this to my buddy and now he wants it gone.

It has 89000 miles on the body and only a few thousand on the motor.
It has a 347 built by Mike Bell at Dayton Performance. Here is the specs on it.
Engine:Stock block, Align honed, Decked parallel with mains, Bored and torque plate honed, Coated cam bearings, Brass core plugs
DSS main support, (block was align honed with girdle on) ARP main and head studs
Probe forged steel crankshaft, H beam forged probe rods, Dished .030 forged SRS dished pistons, 9.5 cr
Assembly balanced by Mike Bell to 28 oz, Complete assembly blueprinted, Moly file fit rings, Clevite 77 bearings
Custom grind cam by Mike Bell for supercharger application, FRPP roller lifters, FRPP spyder and dog bone kit
TFS pushrods, TFS Track Heat heads, no porting, TFS black valve covers
Chrome dual sump oil pan and new pick up, Melling oil pump, ARP oil pump driveshaft
Racemaster balancer, Racemaster billet gear double roller timing chain
New timing chain cover from Ford, New water pump FRPP hardened cam retainer plate, ARP cam bolt and Crank bolt
Cometic Head gaskets, FelPro gaskets everywhere else.
It also has Edelbrock Victor 5.0 upper and lower, 75 mm throttle body, 42lb injectors, Pro Flow 85 mm MAF, Comp Ultra Gold 1.6 rockers,
BBK cold air kit, MSD Pro Billet Distributor, and Spec Billet flywheel. It made 341 hp and 381 ft lbs N/A and has run a best of 12.06 @112 so far.
I have only had it to the track 1 time so far and made 2 passes and the both were identical.
The body has a 3 inch cowl hood, Saleen wing, Cobra grille insert, and GT40 rear bumper cover. Full cage inside with ARC switch panel, full grey interior minus back seat. Battery is in the rear in a sealed Moroso battery box and is a new Exide Orbital battery.
The fuel system is all Aeromotive with A1000 pump, 2 filters, and A1000 regulator and all 1/2 push lock hose and fittings.
It also has tubular K-member, Eibach Drag Springs with airbag, subframe connectors, driveshaft loop, aluminum driveshaft, aluminum radiator
with electric fan, Competetion Engineering struts and shocks, 3.73 gear, 1/2 studs, BBk long tube headers, X pipe, Flowmasters, solid motor mounts,
and a bunch of Auto Meter Gauges and a 5 inch tach with shift light.
It is on 4 lug Weld Drag Lites 15x3.5 front and 15x10 rears with new ET Streets. It also has a Astro Performance T5 with UPR shifter.
The car is not perfect and the paint is starting to show its age.

http://i661.photobucket.com/albums/uu339/draggin50/IMG_1254.jpg
http://i661.photobucket.com/albums/uu339/draggin50/downsized_0220001644.jpg
http://i661.photobucket.com/albums/uu339/draggin50/IMG_0799.jpg
http://i661.photobucket.com/albums/uu339/draggin50/IMG_0455.jpg

[Beater]

Gould mustangs are the shit!!! GLWS

[draggin50]

Gould mustangs are the shit!!! GLWS

Thanks! I loved the car but I traded it to him for some shit and now he just wants to move it. If anyones interested Ill give his number.

[draggin50]

He will take cash and some trades depending on what you have.

[tmotorsports]

interested in a trade?
>>
>> 1999 mustang GT REAL 5th anniversary edition,not just 1999 mustang with
>> 35th anniversary fender badges.they made #4628 mustang GT anniversary
>> editions in 1999 some coupes some convertibles all 4.6 GTs in only 4
>> colors.white,silver,black and red.all had same black and silver
>> interior,honeycomb rear taillight panel the wheels were a little polished
>> with black accents instead of painted silver and had a black hood
>> stripe.my hood stripe is not on mine anymore.mine is 1 of 1259 silver
>> cars.its #4220 of the #4628.has an NADA classic car vlaue low book of
>> $9000 but really is better then a low book car.mine is 4.6 ,automatic
>> transmission,air conditioning,cruise control,tilt wheel,MACH460 am/fm
>> cassete single CD system.has right at 92,000 miles on it.Runs and drives
>> great everything works.consider trades for
>> 1986-93 Mustang GT or GT convertible,maybe Ford F150 4x4 extra
>> cab.looking for nice trades no junk.Mines is not junk.
>> call me or text 740-649-4372 cell

[draggin50]

I let him know. As soon as I hear back Ill get him your number.

[draggin50]

He still has this and is looking to move it. Hell of a car and a great deal. If I had the cash I'd buy it back.

[draggin50]

$7000 cash

[draggin50]

Parting out the car. Hit me up with offers. Roller may be sold.
Complete engine $4500 intake to pan flywheel to balancer. Will throw in the sct chip as well. Drop in and go.
T5 tranny with new clutch kit and UPR shifter with bellhousing $500
Aluminum driveshaft $100
Complete roller $3500
Cobra wing $100
8.8 with 31 spline Moser axles and spool, 3.73.gear, Trick Flow girdle, 9 inch ends $875

[draggin50]

Roller $3500 come and get it!

[draggin50]

Putting this back up. He is parting out the whole car so make him a deal! Alot of real nice parts on it and its all gonna go.

[INSANEBA]

How much for the tranny minus the other stuff? Just the trans and maybe the shifter?

[blue5.8]

im intrested in the seats? and a few other little things

[draggin50]

Im getting with him now. The car is located down around me still but he lives in Cincy. As soon as I hear something back from him Ill pm ya.

[draggin50]

The newer leather seats are gone and it has the older black seats out of my coupe in it now. Just let me know what all ya need and Ill see what he says.

[blue5.8]

what kind of condition are they in?

[draggin50]

Im not real sure. Id say not great. Ill have to take a look at them sometime.

[Sloney50]

Motor?

[draggin50]

Its the DP built 347 and its for sale also. All complete with every accesory all the fuel injection stuff, mass air meter, and all. as seen in the picture in the car. He wants 4500 for it all the way it sits. He may do some dealing though.

[draggin50]

Sold the car complete. Please delete!

[GREAZY]

Glad raz was able to sell it , did it stay local ?

[draggin50]

I guess Doughman bought it tonight....

[GREAZY]

I glad it is staying local and hopefuly it doesnt end up like rev 9

[draggin50]

Thats what 1 could only hope. I hope it stays together and gets used like it should.

[juicedfoxbody]

He's not partin it out its goin to gould and son to get it touch up and u will see the new rev nine soon already call bruce brandon fixed all the junk that was put on it I guess bryan u couldn't fix a simple door handle to get in and out of it lol well goin to take it to perscion to try to get it on the kit with c four

[draggin50]

I had better things to do than fuck with the door handle. I had to put the whole car back together and do what I could. We`ll see where it does... Good luck with it Brandon.

[draggin50]

Heard it couldnt keep up with Kurt in the coupe last night! Door handle didnt make it any faster did it???

[INSANEBA]

Damn, there went my tranny lol... And LMAO on the door handle comment too...

[penceracing]

yea i hope it stays together to its a nice car

[red srides]

part it out brandon i could use some parts he is geting it tuned so it should be a littel faster

[juicedfoxbody]

Yea a little motor didn't hang with kurt but I'm not scared ill try anyone I wanted to see what it would do beside a ten second coupe it let me down but I got a little money saved I got it right kurts car runs killer ill put a turbo kit on it mikes got and play with it and we will line up agin lol it all fun bryan I was messin with u on the door handle. I got a new one and painted it the car is nice u took care of it. The trans is for sale four hundred for it all no driveshaft

[draggin50]

Well next time ya bring it out let me know and Ill come out and watch. Its got alot left in it yet so keep it up.

[juicedfoxbody]

Steve and kurt is goin to try them out sometime steve got a o four cobra it made seven hundred horse but it a stick it wil be a good race to watch

[draggin50]

Steve who?

[red srides]

simson............

[draggin50]

Ok I dont think I know him.

[penceracing]

kurt will kill him lol...