Machine shop in cincy that does GOOD 4.6l stuff

[Mavowar]

I prefer responses from people who have had work done andnot heresay......thanks.....let meknow where and what you think about price....service.....etc.....thanks


Lance

[93 coupe]

Steve Barker 513-724-3288 :bigthumb

['92Stang]

+ 1 for Barker machine:bigthumb

[93whitenotch]

Herbs machine shop 793-9214

[Mavowar]

Keep them coming and I might as well tell u my build....

Block= ark Teksid from a Mark VIII Lincoln
Crank stock cast crank(as they seem to be rated to 500 to 600hp w/ some machining
Flat top pistons (Brand unknown as of yet) any ideas what works?

Heads will be 2 valve 38cc trick flows . I should have 13.5 to 14 to 1 comp ratio

I will be using E85

Edelbrock carbed intake and controller

Demon E85 Carb

I was gonna go dohc route but after looking at cost to go to the 500 hp mark seems a bit expensive and its bulk is a bit of a hinderance. It interferes with the dual master cyl I want to run. I tested fitted already.....
and yes I have a nice ustang II frt suspension....

I have talked to another guy who built something simular and he has 424rwhp...... If I get 380 up Ill be happy.My car is very lite and that is another reason I went SOHC I plan on weighing the long block and it fully dressed to compareand for those that wanna know.....

Anyway I am now in a posistion to eally start gettin er done....

[bangingears]

Steve Barker 513-724-3288 :bigthumb

also recommend barker :bigthumb

[cstreu1026]

Sounds like a very cool project. No personal experience with machine shops yet but I know BES has been building engines for some of the top mod motor racers in NMRA.

[Dirtyd0g]

+1 for Steve Barker

[Rustanggt98]

i've heard good things about Barker, but as for personal experience i could not ask for any more quality for the price than Bischoff (BES). i race NMRA factory stock and just won the last event in MI (qualified number one). If you are familiar with the class we do a lot with a little and tony definately was a big part in that. At the very lease talk to him about some cam specs.:cool1:

[Mavowar]

Thanks guys I will talk toall those listed and make my decesion in a few weeks.....

[Brandon Alsept]

I highly recommend BES, Tony will get you took care of. Steve Barker is also a great builder himself. You can't really go wrong with either of them ;)

[mustang8998]

Again, LOL..............

http://www.perfeng.cc/