Need help with cam and intake

[foxtrot]

Ok fellas I currently have,306 with edelbrock performer heads,performer intake,650 dp,b cam,1.7 rockers,3000 stall,I want to change my setup to victor jr,and a special grind cam specs are,avd duration 283/289@50 its 244/252,valve lift 536/536,lobe center 110 with a 106 center lobe,any input will help,As of now my motor runs ok,its done a best of 6.85 in the 1/8 on a 150 shot will this new shit help or hurt me. Come on give it to me.Thanks in advance.

[draggin50]

Hey Nathan. The Victor Jr. will help tons over the Performer intake I think. On my old red car I swapped from the Performer to the Victor Jr. and picked up somewhere around 4 tenths. Youll have to bring the car up sometime. Which one do you have now?

[outlaw85]

In my personal opinion if your turning alot of rpm (7,000 +) then I would go with the Parker funnel web as your best choice. If not then the edelbrock performer rpm air gap will out perform the victor jr. all day long. We proved this in 2008 on Dereks 331 with edelbrock performer heads.

[draggin50]

In my personal opinion if your turning alot of rpm (7,000 +) then I would go with the Parker funnel web as your best choice. If not then the edelbrock performer rpm air gap will out perform the victor jr. all day long. We proved this in 2008 on Dereks 331 with edelbrock performer heads.

Hey Josh what camshaft was in Dereks motor? I just put those heads on my buddies car with a hydraulic roller 520/520 298/304 duration and the Performer RPM II and wasnt sure if his was a solid roller or hyd.?

[outlaw85]

Just a cheap StgIII Trickflow it worked great.

It went 11.11 N/A
pump gas 331 stroker
rpm international cast rot assy.
out of the box performers
stg III trickflow cam
performer rpm air gap
850 quick fuel
bolt down factory cobra rockers
factory replacement headers

LOL nothing fancy but it ran real good for him. We tried alot of different things to get it to that point but it can be done!

And then there's Jason's combo:
Nevermind nobody would believe it anyways LOL

Couple Videos at: JJRACING2008.COM

[foxtrot]

Josh,I already have the cam but Ill go with the air gap.Thanks for your help.

[outlaw85]

No problem looks like a fun car! See you at the track maybe this sunday? Any of you guys coming up to the OSM race it should be a good time if racers and fans show up???