NXcoupe
02-26-2010, 12:47 PM
I have a like new TFS Fuel rail kit that has been fitted and extra hose, fittings, etc purchased to make it work. As it comes from TFS it does not work on a fox 5.0 correctly, I had to purchase other fittings to make it work. This is a compliment to the fuel system I have for sale on here too.
It is Part #TFS-51580001
Link to Summit's site: http://www.summitracing.com/parts/TFS-51580001/
Here is a pic of it on my car:
http://www.daytonstangboard.com/forum/imagehosting/464ac66701ae71e.jpg
I have some more recent pics with the fuel pressure regulator and such, but have to upload, blah blah, it looks good and works well, trust me on that one. I want 400 bucks FIRM for the entire setup. That's Rails, regulator, lines, fittings, and -6 to -6 male on both sides fittings for the return side and -8 to -8 male on both sides fittings for the feed side. It has two feed lines that come up, one on each rail, then it goes through the rails and there is one return line from each rail coming back over to the regulator, then from the regulator back down to the fittings by the Kmember. This is all braided stainless steel line, with black fittings from TFS.
It is Part #TFS-51580001
Link to Summit's site: http://www.summitracing.com/parts/TFS-51580001/
Here is a pic of it on my car:
http://www.daytonstangboard.com/forum/imagehosting/464ac66701ae71e.jpg
I have some more recent pics with the fuel pressure regulator and such, but have to upload, blah blah, it looks good and works well, trust me on that one. I want 400 bucks FIRM for the entire setup. That's Rails, regulator, lines, fittings, and -6 to -6 male on both sides fittings for the return side and -8 to -8 male on both sides fittings for the feed side. It has two feed lines that come up, one on each rail, then it goes through the rails and there is one return line from each rail coming back over to the regulator, then from the regulator back down to the fittings by the Kmember. This is all braided stainless steel line, with black fittings from TFS.