in the dark.

[inferno50]

removing the factory junk off my car. its an 88 gt picked up some upr arms for the back off here but im having a hard time picking a set of springs out. i want front and back. i was thinking the ford racing/ eibach drag springs but i keep getting different comments on those from everyone i talk to. i dont really want to lower the car and i also am not really concerned about corner carving just want somthing that will hook on drag radials. also a shock recomendation. thanks for the input.

[AntiRice427]

If you dont want to lower it just leave the stock springs on it. I would put strange adjustable shocks and struts on and be done with it for now. Later on get some coil overs for the front and keep the stock springs out back.

[outlaw85]

Qa1-Strange adj shocks in front with 130 - 150lb. coil over springs depending on weight of you car.

Qa1- Strange adj shock in back with stock springs (one coil cut out of them)

And if your on a budget go with lakewood 90/10's up front with a coil over kit 130-150 and 50/50 shocks out back with the one coil cut out. And of course make sure you get double adj. upper control arms because the pinion angle will also have to be set to hook on the drag radial!

[Rob]

QA1 shocks are pretty much garbage. I have had brand new ones out of the box that leaked or were locked up and wouldnt adjust on multiple occasions. Strange is the best for the money imo