qa1 control arm rubbing issue

[bobtsgt]

I'm having a brain fart on this one. Heres the story. On my 96 I have a QA1 K member and fox adjustable end a arms. Using my stock 96 spindles and steering. With skinnies I can turn the wheels full left/right with no rub. With stock 16s or 17s if I do a full turn the wheels will rub the a arms. I have steering limiters on and even 3" studs w/ 7/16 spacers. Yet the wheel weights still rub the arms. Only thing I can think of is to cut and weld the arms inwards to help clear the wheels. Anybody else encounter this problem? Going to get my stock arms and maybe some UPRs and measure them up to see if there is a difference.

[bangingears]

I fill your pain, mine rub with any wheel except skinneys, I had 03 cobra wheels on it, and could only turn the wheel 45 degrees each way. The neighbors thought I was retarded because it took ten tries to turn into my driveway.

[bobtsgt]

Think I may end up cutting them up some are angling them inwards if I have to. That or see how much they differ from UPR and maybe switch to someone elses arms. Hell I may even put the stockers back on and make some new mounting tabs for the K member.