FS: 93 Turbo car partout....

[5.0calypso93lx]

Ugh, I can't believe I'm doing this but after adding up what I still need I just cannot afford to make this car what I want it to be. I'm tired of spending paycheck after paycheck on this car to barely see any improvement month after month. After adding everything up, there's no way I can get it to where I want it to this year. I'm going to sell everything but the car itself and get out of cars for a while and try and buy my first home.

See the build thread here.

StangBangerz Forums (http://www.stangbangerz.com/forums/showthread.php?t=43007)



In no particular order:

1) AEM EMS, AEM Boost Control Solenoid kit, and GM 3 Bar MAP sensor, ALL brand spanking new in the boxes. Only opened to look at the stuff. This is $1647 on Summit's website + $90 for the boost control solenoid kit + whatever the map sensor costs. $1200:

http://i446.photobucket.com/albums/qq188/bad306lx/IMG_1412.jpg

2) Glenns Performance Sleeper series tank for a fox body mustang. This is used and has a -10 feed with a -6 return. It's the steel tank. This is $329.95 from Glenns new. I can throw in a stock cover also that has been cut for the feed. $275:

http://i446.photobucket.com/albums/qq188/bad306lx/IMG_1486.jpg

3) Team Z K drop K member kit with fox standard length control arms and Strange coilover kit and the spacers to work with SN95 spindles! This is also brand new but is currently bolted in the car. I bought this brand new from Bob Kurgan and had it dropped shipped to me. I believe I still have the receipt for this. I'm 99.9% sure that the springs on the coilover kit are 12" 175lb, but I will verify once I get home. Fit perfectly on my car. $625:

http://i446.photobucket.com/albums/qq188/bad306lx/IMG_1140.jpg
http://i446.photobucket.com/albums/qq188/bad306lx/IMG_1147.jpg
http://i446.photobucket.com/albums/qq188/bad306lx/IMG_1179.jpg

4) Complete Cobra front brake kit including gray Cobra Calipers with pads, real Brembo slotted rotors, Maximum Motorsports/Stoptech braided brake lines for use with Cobra calipers on a fox, 94-95 spindles painted with Por15, almost brand new 1,000 mile Timken Hubs, Raybestes 93 Cobra Master Cylinder, Maximum Motorsports 3-2 Port conversion, Wilwood proportioning valve and FRPP plug for the stock prop valve. Basically everything you need to convert the front to Cobra brakes. $800.

I don't have very good pics of everything at this time but I can get pictures. See above for calipers, hubs, spindles and brake lines.

5) Eaton 31 Spline Posi differential for 8.8. Has maybe 2,500 miles on it. See here for complete details: $325 Eaton Torque Control Products 19588-010 - Eaton Posi Performance Differentials - Overview - SummitRacing.com (http://www.summitracing.com/parts/ETN-19588-010/)

http://i446.photobucket.com/albums/qq188/bad306lx/IMG_1485.jpg

6) MSD Pro Billet 351w EFI distributor. I need to get the part number and picture once I get home. Great shape. $125

7) Black Magic electric fan for fox. Has the probe for the radiator. Worked perfect. $70

http://i446.photobucket.com/albums/qq188/bad306lx/IMG_1433.jpg

8) Fast Track front mount intercooler. These are supposedly very good cores and were made in kits for 4.6 cars, but I believe went out of business. The only info I can find on them is an old thread on modularfords. Looks to be very well built and is extremely thick at 4.5". Already has straps for mounting. $200:

http://i446.photobucket.com/albums/qq188/bad306lx/IMG_1456.jpg
http://i446.photobucket.com/albums/qq188/bad306lx/IMG_1460.jpg
http://i446.photobucket.com/albums/qq188/bad306lx/IMG_1461.jpg

[5.0calypso93lx]

9) Northern Aluminum 2 core radiator with -16 aluminum fittings welded on. I maybe ran this for 1,000 miles back when my car was on stock motor. Comes with the polished overflow bottle as well. $175

http://i446.photobucket.com/albums/qq188/bad306lx/IMG_1489.jpg
http://i446.photobucket.com/albums/qq188/bad306lx/IMG_1490.jpg

10) BRAND new new Moroso 20520 Oil pan with -10 bung welded onto side of pan for an oil drain, dipstick and moroso pickup. The drain can be blocked off if not needed. All parts are brand new and were actually bought about two weeks ago. I have the receipts where I bought them from and can include. $300

http://i446.photobucket.com/albums/qq188/bad306lx/IMG_1492.jpg

11) Corbeau gray CR1 seats in standard width with fox body rails. These are basically brand new. I've probably sat in them 5 times. They're in perfect shape except the driver side bolster is somewhat flat. Came like this when I bought them, not sure if it was in the packing or what. No holes, tears, markes or anything else. $600

12) Steeda Front sway bar. Don't really know much about this as it came on the car when I bought it WAY back when. I'm not 100% sure it's a Steeda as it doesn't have any markings. It's light blue and considerably bigger than stock. $100

13) Summit Racing aluminum 8.8 differentail cover / girdle. The driver side snubber has some stripped threads but you can still turn it ok. $50

http://i446.photobucket.com/albums/qq188/bad306lx/IMG_1462.jpg
http://i446.photobucket.com/albums/qq188/bad306lx/IMG_1463.jpg

14) 79-93 H&R super sport rear springs. I used these on my car for maybe 1,000 miles. Dirty but barely used. Comes with Energy Suspension poly isolators. $70

http://i446.photobucket.com/albums/qq188/bad306lx/IMG_1474.jpg
http://i446.photobucket.com/albums/qq188/bad306lx/IMG_1475.jpg

15) True HID conversion for 87-93 fox. They've already been installed in a set of clear housing headlights. Very nice, quality setup using Infiniti FX35 projectors. These draw less power than the stockers too :bigthumb $300

This is the kit: The Retrofit Source (U.S.) - HID Projector Retrofit Kits, Retrofit and HID Componenents, Projectors Lens, Wiring Harnesses, Shrouds and more! (http://store.theretrofitsource.com/product_info.php?cPath=24&products_id=141&osCsid=f232c7ffd1a746ca746eec3ef9b489e8)

http://i446.photobucket.com/albums/qq188/bad306lx/IMG_1440.jpg
http://i446.photobucket.com/albums/qq188/bad306lx/IMG_1441.jpg

I'll update later with the motor, heads, rockers and lifters once I get it back from the engine shop.

Easiest way to get a hold of my is my cell, 513-315-6583.

[draggin50]

Where are you located? Im interested in the fan and possibly the k member stuff.

[quik lx]

Sucks to hear James, I know what you mean, took me almost three years to get mine running, then I wanted something else.:rolleyes:

For me I think the thrill is in the build???

[5.0calypso93lx]

Where are you located? Im interested in the fan and possibly the k member stuff.

I am in madisonville, give me a call anytime, 513-315-6583.

[5.0calypso93lx]

Sucks to hear James, I know what you mean, took me almost three years to get mine running, then I wanted something else.:rolleyes:

For me I think the thrill is in the build???

I know it, and I didn't even really get to build anything. I just don't have the garage and money to be doing a build like this. Can't wait to see what you pick up next!

[quik lx]

Can't wait to see what you pick up next!

It's on the way!!!!!!:evilgrin::bounce:

[Stangman]

Lower your expectations... cars are easier to build :lol:








J/K!! :lol:



good luck dude... Hope my car turns out as nice as yours when its done.


Are you atleast keeping the car????? Please say yes!!

[5.0calypso93lx]

Lower your expectations... cars are easier to build :lol:








J/K!! :lol:



good luck dude... Hope my car turns out as nice as yours when its done.


Are you atleast keeping the car????? Please say yes!!

Yes, car will never be sold, it'll just have to wait a long time before it says attention.

[mustangboy]

I wouldn't mind having the tank and eaton but right now the 4 wheeler is getting the love. Guessing you don't need any powder work done in trade. ha ha

[5.0calypso93lx]

I wouldn't mind having the tank and eaton but right now the 4 wheeler is getting the love. Guessing you don't need any powder work done in trade. ha ha

Haha unfortunately not.

[Evil_Capri]

James-

Sucks to hear, but best wishes getting a house! :bigthumb

[Gearhead]

James - sorry to hear you're parting it out, I was looking forward to the build up !!

I'm interested in the rear springs if you still got 'em !! Maybe some of the front brake stuff as well...

[5.0calypso93lx]

James - sorry to hear you're parting it out, I was looking forward to the build up !!

I'm interested in the rear springs if you still got 'em !! Maybe some of the front brake stuff as well...

Someday :bigthumb

Cool, just let me know.

[iceman1234t]

Im interested in the fan... You have a part number on it???

[5.0calypso93lx]

Im interested in the fan... You have a part number on it???

I'm not sure on the part number. It mounted up to the stock specific aluminum radiator fine.

[bkstang95]

James, how tall is the intercooler?

[Buckeye]

instead of building a car to go for broke why don't you turbo a stock motor and make 450-500 for much much less money (like for what you get for most of the un needed stuff in this thred you chould have a done and running 302T)

[bbfstanger]

do you have the turbo hotside for a windsor?

[5.0calypso93lx]

James, how tall is the intercooler?

Brandon, it's 7" tall.

[5.0calypso93lx]

instead of building a car to go for broke why don't you turbo a stock motor and make 450-500 for much much less money (like for what you get for most of the un needed stuff in this thred you chould have a done and running 302T)

Trying to buy a house here in a few months and want to get my financial status straight first. I'd really like to put 20% down.

[5.0calypso93lx]

do you have the turbo hotside for a windsor?

Sorry, the only turbo stuff I have is the intercooler. Hadn't even gotten that far yet.

[Buckeye]

Trying to buy a house here in a few months and want to get my financial status straight first. I'd really like to put 20% down.

aaa ok well that is different then

[bbfstanger]

thanks anyways,good luck on the house

[5.0calypso93lx]

Sold so far:

-Summit Diff cover
-Mac Control Arms
-Strange shocks and struts

Pending:

-UPR Caster/camber plates
-Strange coilover kit

[88lxvert]

can you ship the rear springs to 43035 pm me

[5.0calypso93lx]

can you ship the rear springs to 43035 pm me

I will ship them at your cost.

[SCHMUCKINGHAM]

if you take paypal I am interested in the fan

[5.0calypso93lx]

I do take paypal. bad306lx@hotmail.com

Sold so far:

-Summit Diff cover
-Mac Control Arms
-Strange shocks and struts
-AEM EMS and parts
-MSD Dizzy

Pending:

-UPR Caster/camber plates
-Strange coilover kit

[5.0calypso93lx]

Update:

Guys I will seperate some things to make it easier.

I will seperate some of the brake setup to make it easier on whichever parts you need for cheaper. After adding everything up, I realize my original price was high:

-Calipers - $150
-Spindles & Hubs(1,000 mile Timken hubs btw, cost me $50 a piece) - $150
-Real Brembo slotted Rotors - $130
-All 3 MM brake lines and 2 95 GT brake line brackets with rubber brake lines - $100
-Cobra Master Cylinder with MM 3-2 port conversion - $90
-Classictube Prebent stainless rear hard brake lines for disc conversion - $50

That's WITHOUT shipping. Last time I sold brake parts I got my asshole bored out on shipping because I didn't realize how heavy the stuff was.

K Member and A Arms: $450

High Ports: $1100

[Gearhead]

Update:

Guys I will seperate some things to make it easier.

I will seperate some of the brake setup to make it easier on whichever parts you need for cheaper. After adding everything up, I realize my original price was high:

-Calipers - $150
-Spindles & Hubs(1,000 mile Timken hubs btw, cost me $50 a piece) - $150-Real Brembo slotted Rotors - $130
-All 3 MM brake lines and 2 95 GT brake line brackets with rubber brake lines - $100-Cobra Master Cylinder with MM 3-2 port conversion - $90
-Classictube Prebent stainless rear hard brake lines for disc conversion - $50That's WITHOUT shipping. Last time I sold brake parts I got my asshole bored out on shipping because I didn't realize how heavy the stuff was.

K Member and A Arms: $450

High Ports: $1100

James - sent ya a PM about the items in red. Are they 94/95 spindles ??

[5.0calypso93lx]

James - sent ya a PM about the items in red. Are they 94/95 spindles ??

Scott, yes they're 94-95.

[dsmawd350]

damn son WTF! seems like 80% of turbo builds never see the road. people get into them not knowing how much is involved then part them

[5.0calypso93lx]

damn son WTF! seems like 80% of turbo builds never see the road. people get into them not knowing how much is involved then part them

Ugh, I know it. At this point though, house > car. I'm tired of having a tiny 1 car garage to work in too, freakin sucks. I'm limiting my house choices to at least a 2 car garage haha.

[dsmawd350]

I understand though, realizing how bad the trans am was going to embarrass you and getting out of it before it was too late!

[5.0calypso93lx]

I understand though, realizing how bad the trans am was going to embarrass you and getting out of it before it was too late!

LOL, I expected that in the first response, I'm surprised it took this long.

[dsmawd350]

LOL well good luck with the sale bud !

[bkstang95]

I understand though, realizing how bad the trans am was going to embarrass you and getting out of it before it was too late!

I'm thinking about doing that too for the same reason! :lol:

[5.0calypso93lx]

Putting this on hold till I figure out what I wanna do.

[Maximus]

Putting this on hold till I figure out what I wanna do.

WOOT!! My Pep talked help!!:D

You didnt mention the house part thou.:confused:

[dsmawd350]

man the motors already done and paid for no? id just toss it in and enjoy the car. put the turbo part on hold if anything and use that money toward the house

[5.0calypso93lx]

man the motors already done and paid for no? id just toss it in and enjoy the car. put the turbo part on hold if anything and use that money toward the house

Now it is. Like someone said earlier in the thread, I'm just gonna try and get it going with what I have instead of throwing tons more money at it. I'll be able to to do that and put some away for the house. Really, as long as I put all my tax return in the bank, I'll be fine.

[5.0calypso93lx]

WOOT!! My Pep talked help!!:D

You didnt mention the house part thou.:confused:

Haha, yea everyone has been saying similar. My dad told me to quit being dumb and get my head out of my ass and just get it going as is. :bigthumb

[bkstang95]

Glad to hear this James!

[03z06vette]

are u looking for any other parts? i am interested in the posi unit and the diff covor, i have some mild perf stuff, 24inj 70mm t-body 73 c&l that ill never need mabie with some other stuff, or just cash?, i also have a non roller 306 with a blower cam and roller rockers, im close to having all the stuff for my car. just let me know

[5.0calypso93lx]

are u looking for any other parts? i am interested in the posi unit and the diff covor, i have some mild perf stuff, 24inj 70mm t-body 73 c&l that ill never need mabie with some other stuff, or just cash?, i also have a non roller 306 with a blower cam and roller rockers, im close to having all the stuff for my car. just let me know

Not selling anything else, in fact I'm going to start a wanted thread here pretty soon with the rest of the parts list.