Where did you mount your external fuel pressure regulator?

[5.0calypso93lx]

I'm trying to get some ideas on how to mount an external fuel pressure regulator like the aeromotive 13101.

What kind of bracket did you use?

Are there any regulations on where you can mount the regulator, for example on the shock tower or firewall?

Pics would be very helpful.

:bigthumb

[dsmawd350]

I know it's an fbody but I mounted mine on the back side of the passenger shock tower. i made up a 90* bracket myself to bolt to the bracket that comes with the reg.

http://www.cincystreetscene.com/forums/picture.php?albumid=14&pictureid=348

[Jeff88coupe]

Only picture of my engine bay I have that you can even see my aeromotive AFR is this one....I mounted it where the stock air box use to be. Just follow the braided steel fuel lines..can sorta see it under the top radiator hose in this pic.
http://farm4.static.flickr.com/3239/2306198042_94e24d5355_b.jpg

[Maximus]

This is on my 2000....

http://pic20.picturetrail.com/VOL86/503042/682955/380871542.jpg

TT...

http://pic20.picturetrail.com/VOL86/503042/682955/380871540.jpg

[5.0calypso93lx]

What is holding yours and vinny's up? That's where I'd like mine to end up. I kind of like it front and center and maybe put a pressure gauge on it.

[Maximus]

Custom brackets. Not hard at all to fab up.

http://pic20.picturetrail.com/VOL86/503042/682955/380874077.jpg

[347sc]

Fabbed mine up on the old orange car too. Came off a water pump bolt and mounted the bracket

http://pic100.picturetrail.com/VOL619/2456896/18187552/105735617.jpg
http://pic100.picturetrail.com/VOL619/2456896/18187552/105735633.jpg

[5.0calypso93lx]

I think I'm going to have to mount it in front of the dizzy as well since I'm not running an EFI elbow like Craig. I like the water pump bolt idea, I'll see what I can come up with. Thanks guys! Just what I was looking for. :bigthumb

[Maximus]

Thats how we roll guy.

Let me know if you need any metal, I have some scraps and other pieces down here at the shop.

[5.0calypso93lx]

Thats how we roll guy.

Let me know if you need any metal, I have some scraps and other pieces down here at the shop.

I'll hit u up about it next time i'm in there.

[Timido]

To bad I just changed jobs with-in my job or I could have made you one.

[5.0calypso93lx]

To bad I just changed jobs with-in my job or I could have made you one.

Don't tell me that ! :lol:

[atbracn]

Custom brackets. Not hard at all to fab up.

http://pic20.picturetrail.com/VOL86/503042/682955/380874077.jpg

i miss that car. i always did love that thing but man you should see it now!!! a shit load of dust and a huge motor:D

[5.0calypso93lx]

Craig, any way to get those pics back? I'm about ready to do start on making something for this.

[Maximus]

Craig, any way to get those pics back? I'm about ready to do start on making something for this.

Ill try and get them up on my FB. Check it in a few.....Pics are up.

[Pops Fun]

Hust thought I would throw mine in

http://i268.photobucket.com/albums/jj22/Popsfun/DSC03757.jpg