stick behind a bbf

[blk93notch]

im looking for some info on putting a stick behind a 460. im aiming for an engine about 400 450 hp. it going to be a street driven car. any help would be great. just trying to figure out if ill be going auto or stick. its also going in a 90 hatch.

[Stangman]

Same here dude... good luck to ya

As far as I know... Lakewood makes a scatterproof bell, Also there is a billet flywheel out there somewhere, a TKO600 might be what you need as far as a trans. Should be able to get a stock style performance clutch for a truck, and I think even the mustang cable will work

I HIGHLY recommend the 1.5" K-member spacers sold over at bigblockfox.com, I think they are made by Fordified racing... That should keep you from having to beat your trans tunnel in.

All I need is a trans set up and headers and I'll be throwing a 460 in an '85 coupe myself

Make sure your crank has the hole for a pilot bearing, I think some of the older engines didnt have that cut out.

[blk93notch]

im for sure using the k member spacers. im also going with a tubular k member. i was figuring the tko 600 but i heard they are rather expensive.

[mustangrfast88]

yes the tko 600 is expensive but one of the best trans out there but heard they are hard to speed shift might want to looking into a gforce transmission i have always wanted to build a bbf and a 5 speed car thought it would be fun

[blk93notch]

i didnt think of gforce....ill have to look into them. thanks