guaging intrest

[Jrcmutang]

Guaging intrest here........ i have a on3 performance turbo kit, but it has the cold side set up for a carb..its the 70mm intercooled kit and let me stress that it has ZERO run time, never been strated. Comes with the carb hat and the rubber coupler, a 650 demon carb w rebuild kit.....kit is for a 302...2k obo

[Jrcmutang]

hot side is mild steel

[draggin50]

What all would it need for a fuel injected set up? And how much without all the carb stuff?

[Aweasel]

What all would it need for a fuel injected set up? And how much without all the carb stuff?

if you're interested in the FI kit you might just go to on3performance for that, brand new kit from them for EFI is about 1800

http://www.on3performance.com/mustang50.html

[draggin50]

I just clicked on that site but it wouldnt let me add to cart to see what the exact price is. I think Ill just order it if it lets me. Thanks for the help.

[blown86lx]

Go on ebay the kit is $1475 plus shipping on ebay. For an extra $700 they will send you a 255lph pump and 42 or 60lbs injectors and a matching mass air meter. Heres the link.


http://cgi.ebay.com/ebaymotors/1986-1993-Mustang-5-0-Single-Turbo-Kit-Foxbody-86-93_W0QQcmdZViewItemQQhashZitem1e59b115afQQitemZ130 353796527QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAcces sories

[blown86lx]

You could use his kit if he would seperate the carbed stuff and sell it seperate. Then all you would need would be a pump, injectors and a MAF. By the way I might be intrested also if you would split up the carbed stuff and just sell the kit without the hood and caburator.

[draggin50]

My car already has an aeromotive A1000 pump and 42lb injectors. Thanks for the site also. Im thinkin of keepin the 92 now and just going this route.

[88lxvert]

just call on3 you can pick them up made in westervilee chad is a good guy also will help with anything

[draggin50]

This is great! Im already countin up my change to get this. I just got the number off of the ebay ad so i will be calling soon. Thanks for all the help with this.

[88lxvert]

i am getting one next year have seen alot of them running around here in cbus since they are a local company

[draggin50]

You know much about them? :eard any bad news on them or anything? I think Ill do the upgrade to the 76mm master power.

[88lxvert]

heard lots of lag on that 76 most go with the 70 master power heard those will do something like 28 pds that could be bs but thats what i was told anyways i am going with the 70 master power and upgraded blow off valve his shop jst around corner from my house go on youtube and search lots of good videos of cars with the kit and ones from his shop also

[draggin50]

Ill have to check it out. Have you seen any personally or rode in any? Sorry about hijacking the thread also!

[88lxvert]

no but the shop that is putting my car together has installed quite a few and chad who is the owner of company has said to go with the 70mm due to the lag also besides that i ran into one yesterday and looks clean and another forum i am on all talk great about them..

sorry about the hijack also start a new thread under power adders and i will let you know more