Ported ped. mount AFR 185's/Harland Sharp 1.6 rockers/lifters for sale

[Jeff88coupe]

I'm selling my old head/rocker/pushrod/lifter setup off my 347. I upgraded to a new set of RHS 215's. I had to pull off my 185's to get one of them fixed due to me cracking a rocker arm bolt boss in the head while trying to swap valve springs with the heads on the motor in the car. That head is now at BES getting fixed..will be good as new when done. These heads flow ~295int/220ext at .600". My car put down 420rwhp/400rwtq n/a and ran a best of 10.84 at 124 n/a @3250# on pump 93 gas, 9.92 at 136 on a 175 shot @ 3050# running these heads.

Here is the list of parts I'm selling

Set of used pedastal mount AFR 185's (#1492) that are hand ported by Neil Erickson at Midwestern Induction Technology (http://www.mustangcentral.net/neil/index.html). These heads flow ~295int/220ext at .600". They have about a 58cc chamber...they come from AFR as 60cc..but they were decked to make sure they were straight once when I had them freshened. They have Comp 939 dual valve springs (~130#on the seat/#400 open pressure) and Comp 732 Titanium retainers with 10* locks.
$1550 for the pair.

http://farm3.static.flickr.com/2543/3938215712_3fd8f15a9e.jpg

http://farm3.static.flickr.com/2639/3938220238_515f9201a2.jpg

Intake port
http://farm4.static.flickr.com/3526/3937443949_6534d2a313.jpg
http://farm3.static.flickr.com/2639/3938220238_515f9201a2.jpg

Exhaust port
http://farm3.static.flickr.com/2664/3937434297_3c8cc56879.jpg

Chambers
http://farm3.static.flickr.com/2633/3938226430_b7b4e8912e.jpg
http://farm4.static.flickr.com/3447/3938227994_4604e9441f.jpg

Set of used Harland Sharp 1.6 adjustable shaft pedastal mount rockers.
Here is a article about them.
http://www.stangtv.com/forum/testing-harland-sharp-pedestal-mount-adjustable-4552.html#
$350...are $550 new @ summit
http://farm3.static.flickr.com/2674/3937456315_07cb71f266.jpg

Set of used Manley chromoly 6.90" pushrods
$80
http://farm3.static.flickr.com/2499/3938229586_bfa1bbd3f3.jpg

Set of used Come 838-16 solid roller lifters. Have ~3 seasons of use..very little street miles. All roller still roll smooth.
$200
http://farm3.static.flickr.com/2650/3938210970_f02cda414e.jpg


Will sell the whole setup (heads,rockers,pushrods,lifters) for $2100
Heads and Rockers for $1850
I will not seperate unless the heads sell first.
All prices + shipping and 3% paypal fees if needed.

[Jeff88coupe]

More pictures
http://farm3.static.flickr.com/2533/3938214056_89520eec35.jpg

http://farm3.static.flickr.com/2671/3938230962_d5d0a7352d.jpg

http://pages.prodigy.net/colleenkevin/_uimages/Mvc-011s.jpg

http://pages.prodigy.net/colleenkevin/_uimages/Mvc-006s.jpg

http://pages.prodigy.net/colleenkevin/_uimages/1.6Shaftrockers.jpg

[Jeff88coupe]

Still have...will sell the heads and rockers together for $1650.

[Jeff88coupe]

Thought I had these sold..but the buyer backed out.

Heads and Rockers-$1550
Will also sell the whole package with the custom Street Solid Roller cam i ran for $1900

Cam spec's are .616/.628, 248/260, on a 113 lobe seperation. Went a best of 10.84 at 124 n/a @3250# on pump 93 gas, 9.92 at 136 on a 175 shot @ 3050# running these heads/cam on my 347.

[mustangatic]

here's a bump! I would love to have those heads..wanna trade for 2 kawasaki 110 pit bikes LOL!!!!

[Jeff88coupe]

Still have. Be a very nice set of heads for a street/strip 306 to a 351.

[Jeff88coupe]

$1500 cash is the lowest I can go. A steal for a set of 9 second power capable heads. I'll even throw in a set of 6.9" manley pushrods if you can use them.

Also have a set of used comp solid roller lifters 838-16's...$200.

[INSANEBA]

Would you take one of my kidneys? Free bump!

[1badasp]

nice set of heads.... someone needs these.. glws

[Jeff88coupe]

Still have these for sale...lots of tire kickers. Great set of heads. I'll even throw in a set of used but still good 1/2" ARP head studs.

[cstreu1026]

Wow, I can't believe you still have these.

[331TwistedWedge]

hey jeff, how did neil port these? ... straightened and extended the push rod bulge side or did he raise the roof? ... ive never seen a set of these 185's in person ...

[Jeff88coupe]

hey jeff, how did neil port these? ... straightened and extended the push rod bulge side or did he raise the roof? ... ive never seen a set of these 185's in person ...

I really couldn't answer that...I don't know exactly what he did. I just paid the man:lol:

[331TwistedWedge]

I really couldn't answer that...I don't know exactly what he did. I just paid the man:lol:

i gotcha :bigthumb

im shocked you still have these, just tells you how shitty the economy is ...

bumpity bump, instant 10's on a stroker ...