orangedemon331
08-23-2009, 08:43 AM
Ok instead of a bunch of different threads i figured one would be easier! All this stuff is not mine but a good friends spare parts he is going blow thru carb and sell a buch of his stuff! You can PM me or call him about prices!
Ok here it all is:
Saleen/Vortech intake(lower is ported and upper is matched to 90mm TB and upper is also polished on outside!)
Trickflow street heat intake (not new but box stock)
70mm Pro Products TB and EGR delete
42lb injector(maybe 400miles on them)
Big Air SCT2800 Mass air meter(also less than 400 miles)
C&L 80mm Mass air (polished and not even 100 miles on it)
Pro Products fuel rail kit (1/2 inch adapts to stock lines, anodized blue and has new boost reference regulater on it)
Fuel Tank with 255 high pressure pump(500 miles max)
Mac chrome 1 3/4 long tubes (500miles max)
Mac 3in Prochamber(same mileage as headers)
Mac 3in Cat-back with SS tailpipes( 1500 miles est)
Steel blow proof bellhousing(not sure of brand)
Spec stage 3+ clutch kit 700+lb-ft of TQ capable( maybe 1500 miles)
Fidanza Aluminum flywheel with 50oz,28oz or 0oz capabilities(1500 miles)
Fordracing Auminum drive shaft(1500 miles)
I think thats all of it!! Everything was bought new with the exception of the clutch,bellhousing and saleen intakem theses all came off Rob Lewis's car and it had never been to the track or dynoed! The car these parts are on also put down 504hp on cincy's dyno with 9.5 psi and can be seen working if u hurry! Call Nathan or pm me for prices!!! 859-750-1457!!
Ok here it all is:
Saleen/Vortech intake(lower is ported and upper is matched to 90mm TB and upper is also polished on outside!)
Trickflow street heat intake (not new but box stock)
70mm Pro Products TB and EGR delete
42lb injector(maybe 400miles on them)
Big Air SCT2800 Mass air meter(also less than 400 miles)
C&L 80mm Mass air (polished and not even 100 miles on it)
Pro Products fuel rail kit (1/2 inch adapts to stock lines, anodized blue and has new boost reference regulater on it)
Fuel Tank with 255 high pressure pump(500 miles max)
Mac chrome 1 3/4 long tubes (500miles max)
Mac 3in Prochamber(same mileage as headers)
Mac 3in Cat-back with SS tailpipes( 1500 miles est)
Steel blow proof bellhousing(not sure of brand)
Spec stage 3+ clutch kit 700+lb-ft of TQ capable( maybe 1500 miles)
Fidanza Aluminum flywheel with 50oz,28oz or 0oz capabilities(1500 miles)
Fordracing Auminum drive shaft(1500 miles)
I think thats all of it!! Everything was bought new with the exception of the clutch,bellhousing and saleen intakem theses all came off Rob Lewis's car and it had never been to the track or dynoed! The car these parts are on also put down 504hp on cincy's dyno with 9.5 psi and can be seen working if u hurry! Call Nathan or pm me for prices!!! 859-750-1457!!