parting 89 mustang

[Ryan218]

ok, well here's the deal. whole front sub frame is rusted out and i do not trust myself to cut the car off from the firewall up and welding on a new. i dont want to risk not getting it right and the car not driving stright or tearing its self apart. so parting it out as much i hate to do this...

89 mustang with 48k on it. everything on the car is for sale.

parts that arnt stock are

sn95 front brakes.
04 gt shocks and struts.
3.73 rear with 10,xxx on it. ranger axles.
99 GT pony wheels. 285/45/17 rear, 215/45/17 fronts
6 piece clear headlights.
ford motor sports lowering springs


rust free doors, drivers side has a dent on it.
perfect front fenders with new 5.0 badges.
perfect decklid with spolier.
mint hood
140mph speedo.
grey tweed seats. drive side has a small hole.
lx tail lights
perfect glass all around.

bacially the whole car. make an offer.

http://i163.photobucket.com/albums/t302/88Mustang302/SDC15535.jpg
http://i163.photobucket.com/albums/t302/88Mustang302/lowering89mustang029-1.jpg
http://i163.photobucket.com/albums/t302/88Mustang302/SDC10046.jpg
http://i163.photobucket.com/albums/t302/88Mustang302/SDC10052.jpg
http://i163.photobucket.com/albums/t302/88Mustang302/SDC10017.jpg

if you would like to see pictures of any ceartin thing just ask.

call text anytime. leave a message if i dont answer.

614-832-9977

[dawsin94cobra]

well i would be interested in the center console armrest thing llol and the lowering springs, and the rear tail lights, are you parting it out yet? if so i would like to buy that suff let me know price thanks man

[1byafender]

Id be interested in headlights and the taillights if Dawsin dont take those pm me a price. thanks

[Stimmel]

come install the doors on my car and it will look like a police car it would be sweet

[Stimmel]

put the top on my car too im tired of being vanilla ice

[k062693w]

Ryan PM me a price for the entire top...


Thanks

[Ryan218]

Ryan PM me a price for the entire top...


Thanks

it has a cut in it.

[93hulk]

How much for the whole car?

[duststang]

whole car price?

[turbostang95]

ill take the gears and ranger axles, and maybe the sn95 front brake setup, pm me price

[Ryan218]

How much for the whole car?

pm sent


whole car price?

pm sent


ill take the gears and ranger axles, and maybe the sn95 front brake setup, pm me price

whole rear end? or just gears? i really dont feel like pulling the gears out of the housing.

pm sent.

[R825OH]

Whoa Whoa!!! Ryan I am sure there is someone on this board that can weld that in for you, this is too good a car to part out. Talk to Jesse, he did Deckers.

[Stangman]

Dude.... It's not hard... You can do it! You've done a shit-ton of other things to that car... It's not that bad. Just plate them in and it will be just as strong as it was, if not stronger!!

I'm fixing a '79 Capri with more rot than I've seen on a foxbody... I'm replacing rails and core support, and most of the inner fenders... I've also got an '87 coupe to do that is worse than yours... I'm replacing rails in it too...

I mean heck... Decker did it, and I came down and welded all his front end together... His car still moves :lol:

[Ryan218]

Whoa Whoa!!! Ryan I am sure there is someone on this board that can weld that in for you, this is too good a car to part out. Talk to Jesse, he did Deckers.


Dude.... It's not hard... You can do it! You've done a shit-ton of other things to that car... It's not that bad. Just plate them in and it will be just as strong as it was, if not stronger!!

I'm fixing a '79 Capri with more rot than I've seen on a foxbody... I'm replacing rails and core support, and most of the inner fenders... I've also got an '87 coupe to do that is worse than yours... I'm replacing rails in it too...

I mean heck... Decker did it, and I came down and welded all his front end together... His car still moves :lol:

i dont trust myself to do it. im pissed, frustrated, tired of hearing my dad complain about the car. i need it gone before me and him kill each other.

[Stangman]

I didnt trust myself to put a roof on my hatchback... But I did. You can do it, don't give up on that car, its entirely too nice!

Find some rust free rails. I'll come up on a weekend and do it. Wont be right now, but I will do it. I hate to see a car like that go to waste...

[R825OH]

Send it to someone to do it. It will be worth it in the end. Patience Grasshopper!

[duststang]

Send it to someone to do it. It will be worth it i the end. Patience Grasshopper!

I agree, If you can fix it would better. Looks like a really nice car!

[Stangman]

Go here:

http://s103.photobucket.com/albums/m135/stangman_77/1988%20mustang/

Then here to see the Capri... No pics of the work yet though:

http://www.cardomain.com/ride/2883839

[Ryan218]

the floor pans are rusted. everything rusted from the inside out it seems. which made it look find. everywhere i poke i find a rust hole that gets bigger a bigger. im over wheelmed with this project at this point. if suck a good 1k into this so far and it is no where near done. my dads no help bitching everytime i walk in the door. it just needs to go to a new home or many new homes. ill go down south and find a truee rust free car to bring home later on or early spring and just finish building the motor im building for it. i dont have a choice at this point.

[Stangman]

:lol: a rust free fox will set you back more than you think...

My floorboards were soft as well... Nothing a trip to the hardware store couldnt fix

Probably next year I'll be putting another set of rails in a '91 coupe where they are RUSTED IN TWO... And he drives it around every day with no issues.

I've been considering making NEW DIRECT FIT frame rails for fox bodies... Wouldnt be too awful hard really. Just the cost of materials...


There have been many times I wanted to just scrap my hatchback and start all over, But shoot, finding another one that is nicer is half the battle. I finally said screw it and I'll MAKE it nice and screw all those rust free cars, by the time I'm done it WILL be rust free!

My car has been on jack stands since fall of '07. It's been in my garage since summer of '07. All it takes is time and dedication, and you have that. We've seen that on your past projects. Everyone gets mad and frustrated at their cars, it happens. Don't let this car get away. Seriously.

[shadez14]

If you are parting her out, I am interested in the lowering springs. PM me a price.

[Ryan218]

:lol: a rust free fox will set you back more than you think...

My floorboards were soft as well... Nothing a trip to the hardware store couldnt fix

Probably next year I'll be putting another set of rails in a '91 coupe where they are RUSTED IN TWO... And he drives it around every day with no issues.

I've been considering making NEW DIRECT FIT frame rails for fox bodies... Wouldnt be too awful hard really. Just the cost of materials...


There have been many times I wanted to just scrap my hatchback and start all over, But shoot, finding another one that is nicer is half the battle. I finally said screw it and I'll MAKE it nice and screw all those rust free cars, by the time I'm done it WILL be rust free!

My car has been on jack stands since fall of '07. It's been in my garage since summer of '07. All it takes is time and dedication, and you have that. We've seen that on your past projects. Everyone gets mad and frustrated at their cars, it happens. Don't let this car get away. Seriously.


If you are parting her out, I am interested in the lowering springs. PM me a price.

50 bucks and there yours.


the only problem is its not my house. its my parents. and im in my dads spot right now and im catching hell for it every day. parting out has already started. i love this car but i cant fix it myself. the bottom of the rail that goes down is rotted out. it all rotted from the inside out. so what metal looks solid. is not at all.

[dawsin94cobra]

Call me or pm me I will come get them

[Demented5oh]

damn id almost trade ya my gt for that. that thing looks sweet. how bad could it really be. What have you parted off it so far?

[exrider416]

is the short block stock? If not let me know if you wanna sell it

[BlazinEagle]

ryan how much for the decklid? and maybe the front seats? How is the carpet?

[Stangman]

50 bucks and there yours.


the only problem is its not my house. its my parents. and im in my dads spot right now and im catching hell for it every day. parting out has already started. i love this car but i cant fix it myself. the bottom of the rail that goes down is rotted out. it all rotted from the inside out. so what metal looks solid. is not at all.

i live with my parents too brotha so yeah i know how it is. but the horizontal rail is just spot welded in. it doesnt go all the way down the subframe. do what you gotta do man but its an easy fix even with little welding experience. but if ya gotta part it i could use a good headlight header panel. it killed me to part my black 89 gt but i guess there is some satisfaction in knowing your car will finish other cars.

[cobrajoe]

What you want for the whole vert system? Pump,lines, cylinders, hell even the frame?

[Ryan218]

damn id almost trade ya my gt for that. that thing looks sweet. how bad could it really be. What have you parted off it so far?

headlights, door panels, window motors, 1/4 glass,

guy who my dad bought the 86 GT from is buying alot of crap off my car. he bought all the above and is coming back for the decklid, ALL the trim on the car. and other stuff that im for getting.

[Ryan218]

i live with my parents too brotha so yeah i know how it is. but the horizontal rail is just spot welded in. it doesnt go all the way down the subframe. do what you gotta do man but its an easy fix even with little welding experience. but if ya gotta part it i could use a good headlight header panel. it killed me to part my black 89 gt but i guess there is some satisfaction in knowing your car will finish other cars.

come on down and cut it out of there then.

[Ryan218]

What you want for the whole vert system? Pump,lines, cylinders, hell even the frame?

pm me an offer.

[Ryan218]

Call me or pm me I will come get them

tell me when you want to come get them and ill have them out for you.


614-832-9977

i just got home from work bout an hour ago. and i go back in at 9 and work a double. call anytime. if were slow and im able to talk ill answer. if no answer just leave a message.

[Ryan218]

ryan how much for the decklid? and maybe the front seats? How is the carpet?


100 for deck lid with the spoiler. passenger seat is perfect. drive seat has a rip. carpet is in decent shape. ill get more up to date picture as soon as i get the chance.

mark is supposed to come get the deck lid today after im home from work. if he ends up not wanting it i'll let you know.

[Ryan218]

is the short block stock? If not let me know if you wanna sell it


short block isnt put together yet. i am keeping it to put the motor i was building for this car. into a hatch.

[Stangman]

come on down and cut it out of there then.

I said I would... and I have to come up, not down :D

It's only about a 2hr drive for me...

If you can manage to hold off, I'll try and locate a frame rail or 2

Got a mig welder?

[shadez14]

50 bucks and there yours.


the only problem is its not my house. its my parents. and im in my dads spot right now and im catching hell for it every day. parting out has already started. i love this car but i cant fix it myself. the bottom of the rail that goes down is rotted out. it all rotted from the inside out. so what metal looks solid. is not at all.

When would be a good time to pick them up? I'm off every evening and on the weekends. Are they still on the car, or can I just swing by and grab them?

[dawsin94cobra]

Hey I wanted them first!! Called and left a messsage ready anytime after 6 I'll race ya their lol

[shadez14]

Hey I wanted them first!! Called and left a messsage ready anytime after 6 I'll race ya their lol

If you read, that was originally a response to my post, so technically I called first dibs:bigthumb

[NC89GT]

How much for the 140 speedo??

[Ryan218]

How much for the 140 speedo??


100.00

whoever wants what. just a heads up. i will be in cincy saturday. if there is something you want PM me. and i can bring it down with me.

[shadez14]

I definitely want those springs. What way you heading towards cincy. I live in Dayton, and can meet you somewhere if you prefer. Just let me know when and where is best for you.

[snotzs135]

what shape is the trunk lid in? or is it spoken for?

[Ryan218]

what shape is the trunk lid in? or is it spoken for?

spoken for at the moment.

as of right now dawsin has dibs on the springs. he called me about them and i told him id hold them for him.

[shadez14]

Hey I wanted them first!! Called and left a messsage ready anytime after 6 I'll race ya their lol

Guess I missed the initial post when you included them, so you had dibs, my bad.:cool1: Think I need some more :chug: and gotta keep looking :eek:

[dawsin94cobra]

ya man i have none on mine lol and the coupe doesnt like it, thought about just buying a few sand bags....lol

[Ryan218]

last chance. i will be leaving for cincy in the morning. so far the truck is loaded up. still plenty of room to bring down more parts to save you guys the drive to columbus.

[chadomac]

how much for the doors?

[Ryan218]

how much for the doors?

250 for both without mirrors. add another 75 if you would want mirrors with them.

[Stolly113]

how much for the back half frame ? like from where the arch starts back ?

[Ryan218]

how much for the back half frame ? like from where the arch starts back ?

you dont want it. its rusted out as well!
\
daswin didnt end up getting the springs. so there still up. theres not alot left on this car! i need to get out gone by this weekend so i have a spot to put the hatchback im picking up thursday!

[Stangman]

Ryan, how is the header panel on that car? have you parted it that far?

[Ryan218]

Ryan, how is the header panel on that car? have you parted it that far?

well what do you mean by header panel?

[Stangman]

The header panel is the fiberglass peice that holds the headlights in, and the bumper cover on... bolts to the fenders