NASTY!! Trickflow T/W Heads

[Blowpastyou]

These heads are as good as it gets for these castings!The castings are the only part of these heads that are not NEW! Del West Titanium intake valves, Del West SS exhaust valves, hydraulic roller springs, titanium retainers. They flow 325 @ .550 lift. they are 65cc chambers. They have adapter plates on the exhaust flanges because they were opened up so far. Im pretty sure you could take them off and run standard SBF headers, but they would be a huge restriction. The same headers fit these as R's, AFR 205/225, high ports, and im sure there are some others. There is over $5000 in these heads will sell for $3500 obo. I would even consider a trade on some heads with inline valves, R's, high ports, or AFR 205/225's.

http://i211.photobucket.com/albums/bb78/blowpastyou/coupeparts001.jpg

http://i211.photobucket.com/albums/bb78/blowpastyou/coupeparts004.jpg

http://i211.photobucket.com/albums/bb78/blowpastyou/coupeparts003.jpg

http://i211.photobucket.com/albums/bb78/blowpastyou/coupeparts002.jpg

[cobra429boss]

those are nice bump for ya.. good guy to deal with

[bangingears]

bump for some good looking heads. Look like my old set

[Blowpastyou]

Alright, I have to move these, I need a set of AFR 225's like NOW. $2500 firm.

[TurboNG]

Who ported them? and do they come with the flow charts?
What lift are the springs good to? I might want to down grade my heads so those might work for me.

[Blowpastyou]

Who ported them? and do they come with the flow charts?
What lift are the springs good to? I might want to down grade my heads so those might work for me.

Fox lake ported them, Do have flow charts, I'll have to check on the springs. Down grade?? lol hahahahaha

[93cobra]

good luck...so many seem to be cheap asses these days when it comes to good stuff that costs real money. bump for good heads

[TurboNG]

These must be the stage 2 then, My fox lakes flowed 374cfm with .600 lift and 63cc chambers. I'll let you know if i sell this car, i'll get them. Fox Lake are the Gods of Head Porting........ Bump for a great set of heads.....:coo1:

[331TwistedWedge]

Foxlake is top notch! ...

[Blowpastyou]

These must be the stage 2 then, My fox lakes flowed 374cfm with .600 lift and 63cc chambers. I'll let you know if i sell this car, i'll get them. Fox Lake are the Gods of Head Porting........ Bump for a great set of heads.....:coo1:

I wont get into this with you on the internet. These heads flow more at .550 lift than their stage 4 port at .600. I have NEVER seen a set of T/W flow that well......So for that im calling bullshit!

[VictoryFab]

I wont get into this with you on the internet. These heads flow more at .550 lift than their stage 4 port at .600. I have NEVER seen a set of T/W flow that well......So for that im calling bullshit!

me tooooooo!

[TurboNG]

I wont get into this with you on the internet. These heads flow more at .550 lift than their stage 4 port at .600. I have NEVER seen a set of T/W flow that well......So for that im calling bullshit!

Don't call Bullshit Call Fox Lake! LOL Plus never said what they were, I just said mine!
Plus i never said anything neg. about your heads hell, i kinda want them. Why you always got to be so touchy!? You still want that hug big guy? :)

[TurboNG]

Here this will make it clear as mud!
http://www.foxlakeracing.com/twisted1.php

[Kwik92GT]

The "R" head will flow those kinds of numbers. Completely different head than what Eddie has for sale here.

BUMP ..... for a killer deal on a great set of heads. :bigthumb

[Blowpastyou]

I don't get sensative, I thought you were saying that you had twisted wedges that flowed 374, I definetly would have called bullshit. Like Greg said, these are not the R heads.

[93cobra]

i have the R heads port matched to a vic sr from BES on my motor...they may as well be truck heads though since i can't give my shit away....its flat out comedy... im at $7500 at the moment and can't get an eyebrow raised...then again its not a suv based long block with a turbo and fast system that is good for 8 passes before blowing up so its not cool

[TurboNG]

Well they are called T/W Rs so they are T/W! ;)
Yes these are good heads and i'll give ya another bump

[Blowpastyou]

The economy is screwing with everything, thanks for the bumps

[cstreu1026]

Its hard to sell anything around here. Everybody expects you give shit stuff away. I have $2K worth of BBS wheels from my SRT4 and people want to give me $300 for them. I don't expect to get anywhere near the retail price but for an offer like that I will let them sit in my garage and collect dust for that.

[Kwik92GT]

You order pistons yet? ;)

[Blowpastyou]

not yet, im going to be patient for a lil while tosee if these sell. I really dont want to spend another grand on pistons.

[Rick93coupe]

Its hard to sell anything around here. Everybody expects you give shit stuff away. I have $2K worth of BBS wheels from my SRT4 and people want to give me $300 for them. I don't expect to get anywhere near the retail price but for an offer like that I will let them sit in my garage and collect dust for that.

I'll give you 350.00 Cameron! :D

[TurboNG]

I'll give you 350.00 Cameron! :D

Rick Your LOL is no longer legal you have to use GNR as said by Obama,
And as far as the economy yes people this they can get everything for 1/2 off since we are in the dumps!
BPU: You got these on NMRA!?

[Blowpastyou]

yea, I have them on yellow bullet and corral too.

[93LXhatch]

foxlake are top of the line thats what i run on my car and i love em bump for you man

[tmotorsports]

i have the R heads port matched to a vic sr from BES on my motor...they may as well be truck heads though since i can't give my shit away....its flat out comedy... im at $7500 at the moment and can't get an eyebrow raised...then again its not a suv based long block with a turbo and fast system that is good for 8 passes before blowing up so its not cool

Sorry you can't sell your stuff it is giveaway priced.But don't knock the explorer engines with turbos.Mine was setup just like that no girdles or anything ran over 2 seasons with turbo ran in the 10's and still is running just needs bearings.Cheaper to put another SUV shortblock in it and go racing.In this economy thats the way to go cheaper and easier.I have a 414 windsor(definately not BES Built) but does have a set of bennett racing twisted wedge R heads that cost over 4K all it needs is a piston and its sitting in the garage because when it breaks its way more cash outta pocket.

[Blowpastyou]

These things have to go...... Offers/ trades??

[Blowpastyou]

ttt....

[Blowpastyou]

No one is interested? Im open to any offers.

[1baddlx]

how cheap do u wanna sell them for

[Blowpastyou]

Make me an offer

[1baddlx]

500.00

[Blowpastyou]

sorry.....

[5.0calypso93lx]

500.00

:lol:

[Blowpastyou]

May trade for a honda civic daily driver. No 4 doors, and it must be a 5 speed. hatch or whatever.

[bbfstanger]

i would like to buy them at a prediscussed price! lol!

[mustang3091]

i would like to buy them at a prediscussed price! lol!

You building a monster John

[bbfstanger]

You building a monster John

not til next year ed

[Blowpastyou]

$2000 bucks.......Lets move these.....