Smog pump

[4n_eatr]

ok.. i know this isn't a Fox, ...
but i have a t-bird with a 302 with a bad smog pump... i know on my previous 5.0's we just always would bypass it with a shorter belt... but what size is it?
thanks
Justin

[CNTLOSE]

Not sure what it would be a T-bird, but my '94 needed a 89.5 or a Gates Belt Part #K060895. I tried 4 or 5 belts before I finally found the right one.

Good Luck!

[4n_eatr]

ok thanks. i need to lok at my buddies 5.0 and mine to see if the routing is the same but thank you again!

[stang5slow]

hey CNTLOSE, would you happen to know the belt length to bypass a/c AND smog pump?

[CNTLOSE]

hey CNTLOSE, would you happen to know the belt length to bypass a/c AND smog pump?

80.2 should be the size. Here is a link showing both and the route to use.

http://www.allfordmustangs.com//Detailed/660.shtml

Keep in mind this was the first diagram I found to work for my car. I looked at several, which all had the same layout, just different sizes.

This was from member chris91 running no AC or Smog.


Are you running AC? If not then use this part number, youll have to remove the upper tensioner though. This is the exact belt I ran on my old 94 with underdrives and no AC or Smog.

Dayco #5060790


Good Luck Guys! :bigthumb

[stang5slow]

thanks alot, perciate it, ill get the belt from my buddy at autozone, he'll return anything for me if i need to lol

[stang5slow]

hey anyone know where to get a dam 80.2 belt? i checked o reilly and autozone, they dont have that size

[cobra429boss]

hey anyone know where to get a dam 80.2 belt? i checked o reilly and autozone, they dont have that size
he means 80.5 k6 not 80.2 there is no such thing

[stang5slow]

you check the link? it shows there 80.2

[facemelter71]

I couldnt find any info on a belt length of 80.2

And that was hand typed in on that link.

[CNTLOSE]

hey anyone know where to get a dam 80.2 belt? i checked o reilly and autozone, they dont have that size

I found the 89.5 at Savage. No one else carried that size in the USA that I could find...only in Asia :confused:

You might try there or http://rockauto.com/ If not try to get as close as you can and go from there. You will see a lot of people who have to do that, then make a small bracket/spacer to push the alternator away from the factory bracket.

[stang5slow]

im not gonna buy a million belts till i find the right one lol

[stang5slow]

i saw alot of people at the stang bangerz crusie in with belts that fit without a smog or a/c, no smog bracket either, but cant find the same belt around here lol

[CNTLOSE]

Here is a link to the belt chris91 stated to use with no A/C or smog.

http://www.rockauto.com/catalog/catalog.php?catalog=33&partnum=5060790&a=Search%2Bfor%2BDAYCO%2B5060790

[stang5slow]

rock auto legit? can i trust ordering this from them?

[chris91]

4060802 for the Gatorback or 802k6 for a Duralast at Autozone.


http://www.autozone.com/autozone/catalog/parts/partsShelf.jsp?categoryDisplayName=Routine+Mainten ance&fromType=parts&fromString=search&parentId=cat30056&currentPage=1&filterByKeyWord=4060802&isSearchByPartNumber=true&navValue=14200077&categoryNValue=14299999&fromWhere=&itemId=prod61224&displayName=Belt&searchText=4060802


http://www.autozone.com/autozone/catalog/parts/partsProduct.jsp?displayName=Belt&itemId=prod61224&navValue=14200077&parentId=cat30056&productId=242415&fromString=search&itemIdentifier=242415_0_0_&filterByKeyWord=802k6&categoryNValue=14299999&isSearchByPartNumber=true&categoryDisplayName=RoutineMaintenance&store=1722&skuDescription=Duralast/Belt&fromWhere=&searchText=802k6&_requestid=294

Now if your using under drive pulleys use the one CNTLOSE linked you to.

[stang5slow]

no under drive pulleys, will later on, but not at the moment, so what one should i go with without under drives?

[chris91]

Either one of the two I just linked you to.

[stang5slow]

ok thanks bud

[CNTLOSE]

rock auto legit? can i trust ordering this from them?

Yes, they are legit. You can get some good deals from them. Only bad thing is if you need to return something you have to pay shipping back.

[stang5slow]

or you could always just sell the part for what you paid, dont loose out on any money, and buy the new right part, but i got the belt, its on and works great, thanks for the help guys

[stang5slow]

one more question, what size bolt do i use to cramp the smog lines up? biggest i had was 5/8's, not big enough, im just gonna do this for now till i get to a buddy to weld the lines shut

[CNTLOSE]

one more question, what size bolt do i use to cramp the smog lines up? biggest i had was 5/8's, not big enough, im just gonna do this for now till i get to a buddy to weld the lines shut

I removed all of mine so I am not sure. The only thing I had to weld shut was the opening on the H pipe. If you remove the lines to the back of the heads you will need to buy special plugs to fill the holes.

[stang5slow]

thats what im gonna do, but i just need to plug the lines that are hanging there for the moment till i get it over to a buddys house, then were gonna remove the lines and weld the hole in the x pipe