Hatchback kid
06-28-2009, 01:09 PM
I have a 91, fuel injected 302. it was skipping pretty bad on cylinder 6. so i started changing stuff, started with new plugs and wires and cap and rotor.
Didnt fix it. so next i checked compression, it was about 130 which it was on all other cylinders(though maybe i f'ed up a valve but no)
So then i changed injectors. now the car runs great, no skip at all until it gets about 150 160 degrees then if you put the car to the floor it is miss firing still.
Ive burned through about 2 tanks of gas too because i thought maybe i had bad gas, and i ran sea foam through it. Runs great till it get up to temp then skips.
I don't know what else could be wrong. Any advice appreciated
Didnt fix it. so next i checked compression, it was about 130 which it was on all other cylinders(though maybe i f'ed up a valve but no)
So then i changed injectors. now the car runs great, no skip at all until it gets about 150 160 degrees then if you put the car to the floor it is miss firing still.
Ive burned through about 2 tanks of gas too because i thought maybe i had bad gas, and i ran sea foam through it. Runs great till it get up to temp then skips.
I don't know what else could be wrong. Any advice appreciated