Triz
05-23-2009, 01:13 AM
-Fox mass air harness w/ computer and sct 4 bank chip-$225
-MSD 8582 Dist, 6al ignition, extension cable, blaster 3 coil-$325
-Holley Black fuel pump, with russel comp filter, holley 12-803 reg. -8 earls push loc hose and fittings, dual -6 lines from reg to carb. Dead head fuel setup from sump to carb.-$300
-Ford 1.6 ped. roller rockers less than 3000miles w/pushrods-$250
-Holley 4150 carb, HP main body upgrade, jet ext., notched float, -6 an bowl fittings-$350
-Edelbrock victor jr. intake drilled and tapped for coolant cross-over at rear-$150
-Used 42 lb ford injectors (8) green tops-$175
-PMAS protube 3" calibrated for 42 lb inj.-$150 with injectors-$275
-Canfield 192cc heads, 58cc chambers, 3/8" stud mount, 2.02 intake 1.6 exhaust, TFS springs rated to .540 lift part#20-450-58-0 $800
-Mac Racer's choice white face gauges part#2615 for 96-98 2-v 150 mph speedo-NIB-$20
-2 sets of fox GT tail lights-no cracks/need paint-$50 each pair
-Stock hood-no dents-$20
-fox Hatch Quarter glass L&R-moldings ok/glass good-$100
-fox GT wing-no brake lense-$20
-fox GT side rockers F&R pieces L&R-no cracks/tears needs paint-set-$50
-Weiand Stealth 351W intake manifold-$100
-NX EFI N2O spray plate kit for Trick flow intake used -dual stage plate just refurbished by NX still in package. NX solenoid and purge 10 lb. bottle, brackets with bottle heater and blow down tube.-$475
-NX Hitman kit (square bore) with 10lb bottle, blow down tube, bottle brackets, purge, bottle heater, rpm window switch, holley 12-803 fuel regulator-$475
Open to reasonable offers on all items.
-MSD 8582 Dist, 6al ignition, extension cable, blaster 3 coil-$325
-Holley Black fuel pump, with russel comp filter, holley 12-803 reg. -8 earls push loc hose and fittings, dual -6 lines from reg to carb. Dead head fuel setup from sump to carb.-$300
-Ford 1.6 ped. roller rockers less than 3000miles w/pushrods-$250
-Holley 4150 carb, HP main body upgrade, jet ext., notched float, -6 an bowl fittings-$350
-Edelbrock victor jr. intake drilled and tapped for coolant cross-over at rear-$150
-Used 42 lb ford injectors (8) green tops-$175
-PMAS protube 3" calibrated for 42 lb inj.-$150 with injectors-$275
-Canfield 192cc heads, 58cc chambers, 3/8" stud mount, 2.02 intake 1.6 exhaust, TFS springs rated to .540 lift part#20-450-58-0 $800
-Mac Racer's choice white face gauges part#2615 for 96-98 2-v 150 mph speedo-NIB-$20
-2 sets of fox GT tail lights-no cracks/need paint-$50 each pair
-Stock hood-no dents-$20
-fox Hatch Quarter glass L&R-moldings ok/glass good-$100
-fox GT wing-no brake lense-$20
-fox GT side rockers F&R pieces L&R-no cracks/tears needs paint-set-$50
-Weiand Stealth 351W intake manifold-$100
-NX EFI N2O spray plate kit for Trick flow intake used -dual stage plate just refurbished by NX still in package. NX solenoid and purge 10 lb. bottle, brackets with bottle heater and blow down tube.-$475
-NX Hitman kit (square bore) with 10lb bottle, blow down tube, bottle brackets, purge, bottle heater, rpm window switch, holley 12-803 fuel regulator-$475
Open to reasonable offers on all items.