the start of another.

[Ryan218]

decided im going to make a few of these and sell them. with the mustang cost me an arm and a leg lately. ( have an app at ford for the THRID aliment tomm and the 3rd set of tires. none can get it right and its cost me moneyyyyyy! ) and i want to get this cam installed after schools out. 9 more days!!

i had the ole man help me mix the bondo. ( every time i add hardener i either add to much...or to little :screwy:

i have 3 more console tops so after that ill be done for a while till i get a few more.


http://i163.photobucket.com/albums/t302/88Mustang302/cupholder.jpg

[DeckerEnt]

Hit up Jon at Tire discounters here in Ft Wright Ky. The alignmeny guy there did mine, caster camber plates and all. I will have to get another one done after I swap out my rack.
What do you think the cost will be for adding cup holders? May have to send you mine when I get it to fit!!

[Ryan218]

Hit up Jon at Tire discounters here in Ft Wright Ky. The alignmeny guy there did mine, caster camber plates and all. I will have to get another one done after I swap out my rack.
What do you think the cost will be for adding cup holders? May have to send you mine when I get it to fit!!

the biggest part of it is just the time spent in it. other then that bondo, filler, and glazing putty. can of sandable primer, and the dye and thats it. i has about 10 hours in the first one. so far 1 hour into this one. the buggest thing is i have to drive about 80 miles to get cup holders to make them :lol: ill keep track of how much i spend making this one and go from there. since the first one there was alot of trial and error is seeing the best way to do it.

[Ryan218]

after this dries one more time with glazzy putty to fill in small inperfections then its done.

http://i163.photobucket.com/albums/t302/88Mustang302/0524090034a.jpg

[mustangboy]

I will trade you some powder work for one.

[Ryan218]

id be interested in that.

[Black Horse]

You need to use one to build a mold then crank them out from fiberglass - I'll bet you could sell bunches of them!

[Ryan218]

You need to use one to build a mold then crank them out from fiberglass - I'll bet you could sell bunches of them!

i have never used fiber glass before. and i have no idea how to do that lol.

[aperacer]

well ryan.... at the wifes request i would like to place an order for one of these well crafted cupholder/console tops..... nice work.. wish i had the ability to make something like that...

[Hatchback kid]

Could you ship these?

[snotzs135]

that look nice :bigthumb

[Ryan218]

well ryan.... at the wifes request i would like to place an order for one of these well crafted cupholder/console tops..... nice work.. wish i had the ability to make something like that...

not all the hard really. if i can do it anyone can lol.


Could you ship these?


Yes.

[CNTLOSE]

I think you found a way to make a small fourtune!

Good Luck!

[MrsAPE]

not all the hard really. if i can do it anyone can lol.


You underestimate yourself my friend. Heard we are placing an order. Gonna look sweet in my car!!

[MrsAPE]

that look nice :bigthumb

Should have seen the one already installled in his car. Is very nice.

[facemelter71]

I used to help out at a place called 4 Sands Industries.They remade small auto parts and some other odds and ends for other companies.Some Corvette emblems and older vette shift knobs,64 impala rear view mirror brackets.I would look into a place like that to have them expedite the making process or some thing.First things first.Get a some what detailed plan on it,have a couple friends sign and date the plans.
Also,ive heard nothing but good things about Performance Alignment.Once I get the coupe back together ill be sending it there way for the full front end treatment.

[Ryan218]

Should have seen the one already installled in his car. Is very nice.

thanks :bigthumb

pic for thoese who didnt see the first one

http://i163.photobucket.com/albums/t302/88Mustang302/cup.jpg

http://i163.photobucket.com/albums/t302/88Mustang302/sn95frontbrakes042.jpg

[MrsAPE]

and that's the interior of my car...mine's just missing the cupholders..for now.

[Ryan218]

and that's the interior of my car...mine's just missing the cupholders..for now.

getting closer. i wasnt happy with the way it turned out. so im still messing with it. want this one to be perfecttttt for ya.

[sean]

better get a patent on that.

[Ryan218]

better get a patent on that.

cost to much, nor would i have any idea on how to go about it.

[facemelter71]

Told ya,first things first.Draw up some plans on paper,cardboard,napkin whatever you have and have a couple friends sign and date it.Im tellin ya,to save you ass later on down the road if some one picks up on this they will make some money and you will be left wondering.That original plan that you have keeps that from happening.Ive gone through this once with some people and have some things in the works.Patents are not cheap.

[MrsAPE]

getting closer. i wasnt happy with the way it turned out. so im still messing with it. want this one to be perfecttttt for ya.

sweeeeeeeett!! :D

[Ryan218]

getting closer. sorry its taking so long. was out of town for a few days and been sick. and working doubles so ive have very little free time to mess with this. will tonight after work and hopefully have it done for you this weekend.

[MrsAPE]

no hurry Ryan!! Honest!! Sent you a text back..guess you didn't get it?! Take your time and work on it when you can. I'm good with that.

[Ryan218]

no hurry Ryan!! Honest!! Sent you a text back..guess you didn't get it?! Take your time and work on it when you can. I'm good with that.

i broke my phone and had to get a new one so i lost everything on it lol. so probaly not.

[blk93notch]

im really interested in one. shoot me a price. those are kick ass

[DeckerEnt]

I told you Ryan that those things will sell!!! Get it down to a science and crank em out. Who would of thought that putting cup holders in a car would be such a great idea. LOL!!!!

[MrsAPE]

I'm glad you convinced him to do them Keith cuz I wanted one as soon as I saw his even before it was put in the car!! Ryan is almost too busy to make them with his work schedule. It's crazy!! But, I'm in no hurry.....

[1992MustangDW]

when you get around to it pm me a price ryan. I need one in black!

[Ryan218]

I'm glad you convinced him to do them Keith cuz I wanted one as soon as I saw his even before it was put in the car!! Ryan is almost too busy to make them with his work schedule. It's crazy!! But, I'm in no hurry.....

ha, im making time now. its 1:20am and i dont have work till 12am so ill go put a hour or two or so into yours.

for those wanting a price just PM me with if you will be providing the console or if you just want one made and sent you.

thanks.

[MrsAPE]

I hope (and think it should happen) that your PM box is flooded with request!! I am so excited about getting mine..

[quik lx]

Are you still making these? I need one! I spilled my monster in the stang saturday...second gear spills everything:lol:

[DeckerEnt]

When I get my console to fit right, I will send it to you Ryan for the mod. Hope you still remember how. LOL!!!

[Carl]

Blame it on the blower...not the trans or the shifter!