Cam question

[black90lx]

Will a trickflow stage 2 cam work with a set of trickflow twisted wedge heads with stock piston's? My heads have been milled 40 thousand's. I have 1.6 rockers. The lift on the cam is 542/563.

[85_SS_302_Coupe]

Not a chance, especially with milled heads. You may not even get away with a Stage 1 with them milled.

[black90lx]

I have a stage 1 in it now.

[347sc]

Yep you do.
Once you get the cam we can check it and see. Its better to do it that way then just guess it wont work and pass on using what you want. Plus you can always resale or use a thicker headgasket/different rocker ratio,use a cutter to gain clearance. Depends on how much trouble you want to go thru.

[85_SS_302_Coupe]

What's the duration difference between them? I'm a little shocked that the S1 is in there...that's good to know though. With your heads, do they have the 2.02 valves? If so i think the raised intake valve is what's making it possible for you.

[black90lx]

Yea they are 2.02. The valves are staggered is why they clear.

[black90lx]

I don't think i am going to get the stage 2 then.