EDELBROCK 302 HEADS

[jad0087]

i have a set of edelbrock performer heads for a 302....before i put these on my car i had george montgomery put new valve springs on them and freshen them up....only put about 1000k miles on them since then if that....my car ran a best of 12.50 this past thursday at kilkare with these heads in a full weight gt...stepping up to a bigger engine so i need these gone for a set of 185s....900$

[jad0087]

ttt...........................

[xgtracex]

Are they 202-160?

[jad0087]

yup...

[xgtracex]

Do you know the combustion chamber CC?

[facemelter71]

Do you know the combustion chamber CC?

Google is your friend.
Chamber size for edelbrock heads (http://www.edelbrock.com/automotive_new/mc/heads/ford_sb_performer.shtml)

[jad0087]

ya there ya go...come on guys i need these heads sold...need the money

[Markcore]

Part number?

[jad0087]

i dont have a part number...these are older heads that have been ported out and flow very well...i mean they put my full weight 89 gt to a 12.50 at 109 on a stock bottom end 302...that shows they flow very well haha

[Markcore]

eh... James ran close to that with a stock HCI SSP notch Mustang....

[jad0087]

ya with all suspension work and a lot lighter car than mine....that was with no suspension work FULL weight gt....and what james did is incredible...u dont see that happen too much...

[mustang3091]

I have a set of 289 hi po heads with about $800 in machine work done to them 2:02 valves and 1:60s

[Markcore]

ya with all suspension work and a lot lighter car than mine....that was with no suspension work FULL weight gt....and what james did is incredible...u dont see that happen too much...

You ran a 12.5 with a stock suspension? And yeah, not too many people doing what James has done!

How well will these heads work with a TFS heat track u/l intake, stock short block and a good cam?

[jad0087]

yes i had compleletly stock suspension....thats the same setup i had actually haha...i had a custom grind bennett racing cam and the trickflow intake...

i had these heads, bennet cam, trickflow intake, 30lb inj, and all the obvious bolt ons, stock suspension, and ran a 12.5 at 109...

[Markcore]

What kind of power was it putting out?

[jad0087]

i never had it dynoed....i was suffering from a lean fuel issue and never really figured it out so it would have ran a few tenths quicker im sure...r u interested?...

[Markcore]

Yeah man I am, but was really looking for a set of AFR 165's or TFS TW heads...

[jad0087]

ya those r good heads....but my buddy has comp prep afr 165s and i ran door to door with these heads and my setup...so you can decide...2 grand or 900 bucks haha

[Markcore]

Thanks anyway man, I'm gonna pass.

[jad0087]

alright man thats cool

[jad0087]

ttt........

[jad0087]

come on guys i need the money

[Stangman]

I have a set of 289 hi po heads with about $800 in machine work done to them 2:02 valves and 1:60s

:drool::drool:

[jad0087]

i still have these.......

[jad0087]

ttt....

[jad0087]

ttt..........

[jad0087]

ttt....make me some offers

[jad0087]

will trade for a nice set of wheels and tires...fr500s...prostars....etc...let me know what uve got..must b 5 lug

[jad0087]

ttt.........

[Goober]

You said they have been ported, just a gasket match or a full on port job? Flow numbers?Max lift for springs?

[jad0087]

i dont have all the numbers on them...full port job....

[Goober]

No idea on lift numbers though? What was the lift on your old combo?

[jad0087]

550 is the max lift for these heads...

[Goober]

Dang. I need a .570" lift (I assume .550" is the max physical lift of the head casting). Thanks anyway.

[jad0087]

alright thats cool...ttt.....

[pegasus]

want any trades??

[jad0087]

possibly...pm sent

[jad0087]

ttt...........

[jad0087]

ttt.......

[jad0087]

sold...please delete