View Full Version : 5.4 in a 2000 Van!!
DeckerEnt
04-08-2009, 10:09 PM
www.myspace.com/keithdecker
This is the replacement progress on my brother's work van. This is a bit*h....
mustangjon
04-08-2009, 10:18 PM
did you guys get it out?
DeckerEnt
04-08-2009, 10:50 PM
Greg is working on getting the starter out now. It is loose as hell in there.
92coupe
04-08-2009, 11:13 PM
Vans suck to work on.
DeckerEnt
04-08-2009, 11:27 PM
Well, the motor is finally out of the van. That is one wide MFing motor.
STREETRODZ1
04-08-2009, 11:29 PM
That is definitely no fun. Good Luck
DeckerEnt
04-10-2009, 12:16 PM
You guys are not going to believe this. I finished my first cleaning job and when I walked in the door, my brother says I have to see something. I walk over to the motor that came out of the van and there under the valve cover in between the cam lobes in a spent .223 casing. No idea how it got in there. We bought the van in 2004. Never had the valve covers off. Kind of weird.
Secondly, there is a ton of slack in the timing chain. I am thinking that is where all the noise was coming from. Who knew. Oh well, the new motor is going in anyway. We already have most of the stuff transferred over.
Walter
04-10-2009, 12:25 PM
You know you shoot too much when there is casings inside your motor. haha
DeckerEnt
04-10-2009, 03:47 PM
Good news! My brother who had no work scheduled today has got a ton of stuff done to the truck. Motor is in!!! Trans is getting bolted up as I type this. All that is left is all the wiring, belts, hoses, intake, etc etc etc...Kudos to my brother Greg!!
DeckerEnt
04-10-2009, 09:14 PM
Bill, Cliff, Jon, and Kevin stopped by tonight. Thanks Guys!! The intake is bolted on, coils are bolted in and wiring is started. We are coming along well.
damn, you guys dont play.
DeckerEnt
04-10-2009, 09:44 PM
I have work scheduled for both of us Monday AM. We have to get this thing on the road by then. Plus easter stuff all weekend too.......
R825OH
04-10-2009, 09:48 PM
You guys were rolling right along when I was there. Good Job!!
KobraII
04-10-2009, 10:36 PM
Yeah, everything was going smoothly when I was there. I wish I could of done more
DeckerEnt
04-11-2009, 12:19 AM
We are done for the night. Got my mom's easter thing Saturday. After that, me and Greg will finish it up. Radiater, fluids, torque converter, start it, front end, headlights and grill. Hopefully it all goes smoothly. I will post tomorrow how it goes.
Thanks to all who lended moral support and a hand here and there.
DeckerEnt
04-11-2009, 08:14 PM
Back at it now. Me and Greg are here. If you all are out and about, stop in!
DeckerEnt
04-11-2009, 08:47 PM
The motor turns!!!! When we put on the PTO pully, the crank pully didn't move at all. We had a thought that the motor may be locked up. We sprayed penetrating oil in the intake tract before the intake got bolted on last night. Well, we just threw a battery in it and bumped the motor over and it moved. Thank God!! Torque converter bolts going on now. Starting it soon!!
DeckerEnt
04-11-2009, 11:58 PM
Ok. Just put the new intake manifold gaskets in. They are in right this time. Taking a little break before we bolt it back down and reinstall all the coils. Re connect the wires to everything then start it again. Slow but sure, we should have it running tonight!!!!
92coupe
04-12-2009, 12:33 AM
What's the verdicct?
DeckerEnt
04-12-2009, 01:06 AM
It Runs!!!!!!!!!!!!!!!!! Success!!!!!!!!!!!!!! I am headed home and my bro is going to bolt up the grill, headlights, bumper. I am beat!!
BigBadStang
04-13-2009, 08:24 AM
Lol...nothing like thrashing on something to beat a deadline!
Makes you feel like a kid again! :lol:
Good work Keith (and those who helped;))!
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.