My 95 Cobra "SUPERSNAKE302"

[STREETRODZ1]

Here is some pics of my Stang, hope to have it ready for some summer racing and cruizin. Will have some more pics up soon.

[STREETRODZ1]

Guess i could explain a little of what im doing to the car. Gonna run the stock bottom end 302 for now, it has a e-303 camshaft i put in it while it was still fuel injected, other then that, some 1.7 roller rockers, Edelbrock air gap intake, Holley 750 and alot of nitrous, at least as much as my little 302 can stand in pretty much stock trim. I have already installed the tubular k-member, and tubular lower control arms, just lack the coil overs, Im dropping off as much weight as possible and cleaning and simplifying everything. I have already installed the roll cage, and am going to be putting in the 10 gallon fuel cell, and 2 holley pumps, one for nitrous and one for motor, i like to be able to tune them seperately. Welded up some brackets for my racing seats and got them installed, now i got to find me a c4 and hopefully soon i can start some reassembly. With some edition of some pro star wheels and a little rear suspension, i hope to have a simple but effective combo to put up some decent numbers for a mild little 302, got alot of work to go, but i get a little more done every day, will update the pics soon.

[STREETRODZ1]

Oh yeh, cant forget my MSD ignition. (pro billet, 6al, blaster coil)

[Ryan218]

going carb on it?

[STREETRODZ1]

Yes, i like carb combos so thats the only way for me to go.

[STREETRODZ1]

Well. i got the cage all finished up and painted, got the carpet back in, and got my race buckets in with my brackets i welded up, also got the mounts for the motor plate welded up. I started on the front end to, i got the tubular k-member in, and the UPR a-arms also, just got to get the coil overs, try to get some more pics up later.

[Ryan218]

by chance what did you do with the factory seats? post som epics of your progress!!!

[STREETRODZ1]

Pics of the seats are in a post under the interior threads in the for sale section, im gonna get some more pics up later.
Thanks

[STREETRODZ1]

Took the dash out today and got the heater box and some other stuff out i wanted gone, cleaned up some wiring and got rid of the air bags.

[STREETRODZ1]

Well, i have been slack about putting up progress and pics of the car, so im gonna try to get on the ball. I will have some pics up this week.

[k062693w]

bbfstanger sprayed a 250 shot on a stock bottom end all year last year, And went mid 10's with an AOD !!!
Cool Project

[STREETRODZ1]

Hell yeh, well that's my plan for the summer, then in the winter im stroking it.

[Rick93coupe]

Looking good! My brother has the same car, I think it has tan interior though.

[STREETRODZ1]

My car is tan interior to, i just put black race buckets in it, i still got the stock seats front and rear for sale if anyone is looking.

[STREETRODZ1]

Well i got some more done to the car today, Motor is almost ready to go back in, and with a AOD block plate and tv cable (if you have them please let me know), i will be able to bolt the motor and transmission together and slide it back in the car. I worked on the engine bay some more, and finally got the motor plate all done, i also got the interior about put back together to. Its a slow process (mostly cause of money) but im getting there, and god knows i cant wait. Here is some more pics.

[STREETRODZ1]

More pics

[STREETRODZ1]

and some more pics

[1992MustangDW]

I think I have your block plate I will let you know in morning. You can have it if i still got it.

[STREETRODZ1]

The pics of the UPR control arms ain't so great, light was not so good.

[STREETRODZ1]

That would be great man, how far from Dayton are you. Thanks.
Cody

[Rick93coupe]

I see you got your water pump on!!! :bigthumb:

[STREETRODZ1]

Yes, used one of the gaskets you gave me, and the other one i needed was in the timing cover gasket kit, so im good to go, thanks

[Rick93coupe]

Not a problem glad I could help out.

[STREETRODZ1]

Well, i ordered some goodies for the stang today, i got my block plate off Ebay, some underdrive pulleys, and the UPR coil over hardware kit. Got some real good deals to, so i am a happy camper. Got a long list of stuff to go, but we are getting there. Should have some more pics up soon.

[draggin50]

Hey Cody hows everything coming along? It sure is a nice start you have so far. I'll have to get pics up of mine soon if I ever get a chance. I'll try to find your number again and give ya a call on the regulator. :bigthumb

[STREETRODZ1]

Got the motor back in the car and some of the front end put back together.:bigthumb

[STREETRODZ1]

Got some more done tonight, got the coil overs done in the front, got the under drive pulleys shimmed up to compensate for the motor plate, got some wiring done, and a few more odds and ends on the motor. Also got the alternator bracket all fabbed up, and made me a bracket for my fuel regulator also. So we are getting there.

[STREETRODZ1]

Couple more pics.

[DeckerEnt]

Nice.

[STREETRODZ1]

Thanks man, i get more excited all the time.

[Rick93coupe]

Looking good man, your not messing around at all!

[STREETRODZ1]

Trying not to man, i have owned the car about a year, and have only drove it for maybe 2 months, so i am ready to enjoy her some. The springs look good up there, Thanks Rick.
Cody

[draggin50]

Looking good. I see you got some valve covers also. Turning out pretty nice. Wish I could win the lottery to finish mine. Cant wait!!

[STREETRODZ1]

When you hit the lottery, let me know, i will need some sponsorship, LOL.

[2Kblacksleeper]

Nice progress.

JOhn

[STREETRODZ1]

Picked up the wheels today, got some Pro Stars off Tony T, thanks for the great deal man. Here are some pics of the wheels just sitting on the car.

[STREETRODZ1]

Some pics of the car back on the ground.:bigthumb

[10lb 308]

do u have driver side airbag if so pm me i need it 4 my brothers car:cool1: