PaulFiveOh
02-25-2009, 03:51 PM
I have a case fill C4 with an aftermarket pan on it and a manual RVB.
I was pushing my fox hard yesterday on the high way, parked it, got back in and went to go and it wouldnt drop in to any forward gears.
Got under it and I was leaking fluid every where.
I got it up in the air today and started it after pouring some ATF in it.
ATF started spewing out of the top of the case, inbetween the pan and the bell housing. It was coming out from the top of the pan, in between the 2 bolts on the front of the pan.
It seems like to me I simply need to drop the pan, put a new gasket on, and tighten it back up.
Does this sound right and am I explaining this well enough so that you understand where I am trying to say the fluid is coming from?
Thanks for your help.
I was pushing my fox hard yesterday on the high way, parked it, got back in and went to go and it wouldnt drop in to any forward gears.
Got under it and I was leaking fluid every where.
I got it up in the air today and started it after pouring some ATF in it.
ATF started spewing out of the top of the case, inbetween the pan and the bell housing. It was coming out from the top of the pan, in between the 2 bolts on the front of the pan.
It seems like to me I simply need to drop the pan, put a new gasket on, and tighten it back up.
Does this sound right and am I explaining this well enough so that you understand where I am trying to say the fluid is coming from?
Thanks for your help.