Parse error: syntax error, unexpected '<' in /opt/bitnami/apache2/htdocs/forums/archive/global.php(117) : eval()'d code on line 1
msd box,2 step and digital window switch... [Archive] - StangBangerz Forums
PDA

View Full Version : msd box,2 step and digital window switch...


black90lx
02-03-2009, 10:46 PM
i was going to move all this to the hatch of my car to get it out of the way. would it be a good idea to keep it towards the front of the car or does it matter? i was going to run 12g wire for all of it except the power and ground for the msd box, i was going to use 10g for that or would 12g be fine?
TurboNG
02-04-2009, 07:16 AM
I know people who have it back there, mine is under the driver's seat :cool2:
Jeff88coupe
02-04-2009, 08:53 AM
I have mine in the back seat area (rear seat delete) behind the drivers seat. I would use 10 gauge if you can for the main power feed wire and ground.

Here is a pic of my electronics board...all the relays/msd/2step
http://farm4.static.flickr.com/3116/2305401531_f93c25dd2d.jpg
black90lx
02-04-2009, 09:56 AM
I know people who have it back there, mine is under the driver's seat :cool2:

Thats where mine is right now.
black90lx
02-04-2009, 10:01 AM
I have mine in the back seat area (rear seat delete) behind the drivers seat. I would use 10 gauge if you can for the main power feed wire and ground.

Here is a pic of my electronics board...all the relays/msd/2step
http://farm4.static.flickr.com/3116/2305401531_f93c25dd2d.jpg

So use 10G on all the wires on the msd 6btm?
Jeff88coupe
02-04-2009, 01:37 PM
So use 10G on all the wires on the msd 6btm?

No..just for the power and ground feed to it. I used 12 or 14 for everything else.