Parse error: syntax error, unexpected '<' in /opt/bitnami/apache2/htdocs/forums/archive/global.php(117) : eval()'d code on line 1
1.7 pedastal mount rollers need 1.6 [Archive] - StangBangerz Forums
PDA

View Full Version : 1.7 pedastal mount rollers need 1.6


kennebellcobra
01-24-2009, 01:36 PM
I was checking piston to valve clearance and came up a little short so I would really like to just swap if someone has 1.6 rollers....if not I'll sell them for 150.00 OBO...they are in great shape!
12seclx
01-24-2009, 02:01 PM
:screwy:
kennebellcobra
01-24-2009, 02:08 PM
:screwy:

After porting the heads I cc'ed them and came up with 66 cc's so I had .040 cut off them so I did'nt have 8.5:1 compression:lol: I think that is why:tongue2:
12seclx
01-25-2009, 04:38 PM
After porting the heads I cc'ed them and came up with 66 cc's so I had .040 cut off them so I did'nt have 8.5:1 compression:lol: I think that is why:tongue2:

I only have 9.38 : 1.... :cool2:.........;)
kennebellcobra
01-25-2009, 08:56 PM
I only have 9.38 : 1.... :cool2:.........;)

That may be the reason your car is sloooooooooooooooooooow! Bahahahahaha
leroy93lx
01-25-2009, 10:07 PM
I have a set of 1.6s with about 15 minutes of run time on them. I think they are FMS. They are bright blue aluminum rockers.
kennebellcobra
01-25-2009, 10:51 PM
I have a set of 1.6s with about 15 minutes of run time on them. I think they are FMS. They are bright blue aluminum rockers.

Thanks for the offer but I no longer need them.