351 Swap

[FINT07]

i'm getting ready to put a 351w in my 94 gt i've already switched the 302 to carb
i got a few Questions if you'll can help me with?

all the front acc. will switch over won't they?

also 302's before i think 1981 were 28oz balance and all 351w were 28oz
i'm needing a 157 tooth 28oz flywheel and i've been doin some research on autozones website and i found that for a 78 mustang w/ 302 2BL has 157T 28oz flywheel i don't see why it wouldn't work on the 351?

any other info i might need to know would be great

thanks matt

[blk93notch]

the front acc. will switch over but you need 351 swap brackets for them. the balance im not sure

[mustang8998]

the front acc. will switch over but you need 351 swap brackets for them. the balance im not sure

Like he said, you need the right brackets (taller deck).

As far as I know, the early 302 and 351 flywheels, are the same.

[Barger]

im not positive on this but i think the early 302 were a 10 inch clutch and the roller 302 was a 10.5 inch clutch so just make sure what clutch you want to run. somebody else chime in if im wrong....

[FINT07]

yeah i found out ford never made a factory 157T 28oz flywheel i found one on ebay i'm gonna pick up

also the 351 swap brackets they say are for 86-93 but i'm keeping p/s and a/c and i know the brackets are diff on 86-93 and 94-95 so i think i can extend the a/c-p/s bracket on the 94 of i might just switch it over to fox acc.

has any body put a 351w in a 94 and kept a/c and p/s

thanks for the help
matt

[NUTTSGT]

Before you buy that flywheel, consider buying an SFI unit. I bought my PRW from Livernios.

[1994stang351w]

hey i know this is kinda of an old post but im putting a 351w in my 94 and i also need a flywheel so if anybody could give me a link to a cheap flywheel that be great!!!!!!!!!!!!!!!!!!

[pegasus]

hey i know this is kinda of an old post but im putting a 351w in my 94 and i also need a flywheel so if anybody could give me a link to a cheap flywheel that be great!!!!!!!!!!!!!!!!!!

advanced auto