Parse error: syntax error, unexpected '<' in /opt/bitnami/apache2/htdocs/forums/archive/global.php(117) : eval()'d code on line 1
F cam with an auto [Archive] - StangBangerz Forums
PDA

View Full Version : F cam with an auto


Steves LX
11-16-2008, 03:27 PM
Can you use an F cam with a stock AOD and stock converter?
k062693w
11-16-2008, 03:52 PM
I have an F-cam in mine !!!
12seclx
11-16-2008, 03:52 PM
I think with an auto trans and any cam, you have to run some kind of stall. or maybe it's something where you should run a stall or you'll have driveability issues...

If it were me.... I'd put a stock cam in it with 1.72's, it'll run better, idle/drive better and get better fuel economy... :bigthumb

9.3 : 1 compression isn't all that great for that f cam either, if I remember right.... :lol:
Mavowar
11-18-2008, 08:21 AM
you can run the f cam but a Stall is recommended for maximum performance.

I really liked the E cam in my old 5.0l set up I had in the mAv I ran a 3500 stall
1986GT
11-18-2008, 09:54 AM
My brother runs an F cam in a 5 speed car. It doesn't even start pulling hard till around 3000. So I would imagine you would need a stall in that rpm range.
facemelter71
11-18-2008, 11:23 AM
Most def' need a stall.Usually anything over 220 duration the stock converter wont like it.