WideOpenThrottl
11-12-2008, 07:58 PM
I have a COMPLETE turbo kit for a 96-98 Cobra. May fit 99-01 but I am not sure I'm sure someone can chime in and let me know for sure. The turbo is tucked in the drivers side fender and cannot be seen from under the hood! Here is the kit:
Master Power T-70 turbo with 90ar exhaust housing
3 inch cross over
Stealth Blow off Valve
Tein Waste gate
2 1/2 inch inter cooler piping
comes with inter cooler 2 1/2 inlet and outlets
All clamps and couplers
Full exhaust back to the even the mufflers
The kit laid down 440 hp and 485 on 5 pounds of boost at 4500 rpms. Motor only had ARP head bolts, JE pistons, Eagle Rods and IRMC deletes. We had to back it off on the dyno because it had too much blow by. The heads got a horrible tick so I pulled the motor and can't afford to rebuild it so I'm selling the kit. If you have any questions just ask. I'm asking 2700. Thanks
I have 60#'s, mass air sensor, and a SCT tuner also for extra!
Master Power T-70 turbo with 90ar exhaust housing
3 inch cross over
Stealth Blow off Valve
Tein Waste gate
2 1/2 inch inter cooler piping
comes with inter cooler 2 1/2 inlet and outlets
All clamps and couplers
Full exhaust back to the even the mufflers
The kit laid down 440 hp and 485 on 5 pounds of boost at 4500 rpms. Motor only had ARP head bolts, JE pistons, Eagle Rods and IRMC deletes. We had to back it off on the dyno because it had too much blow by. The heads got a horrible tick so I pulled the motor and can't afford to rebuild it so I'm selling the kit. If you have any questions just ask. I'm asking 2700. Thanks
I have 60#'s, mass air sensor, and a SCT tuner also for extra!