Don't knock your brother down, reach out and pull him up..Twisted Twins Final Chapter

[facemelter71]

Dont forget about the drivers side WG pipe.I think it was loose last time i was there and most likely needs welded.

[MrsAPE]

Well, TT RUNS AGAIN!!

Although a bit FAT, she fired up and had no leaks. So now we just have to finish up a few things, then Ill be needing a video camera. :cool1:



WOOT!!




Stay tuned....

double WOOT!!!!

[1992MustangDW]

sweet, I want to see it run down track, I think you should make a stangbangerz day, and everyone get together to see it run.

[DeckerEnt]

We don't need an SBZ day to see twisted run. Just bring it to any track and just ask for single runs. I am sure the powers that be have this in the plans. We will know when we need to.
Keith

[Holly]

sweet, I want to see it run down track, I think you should make a stangbangerz day, and everyone get together to see it run.

I think a lot of people want to see it go down the track. Whenever Craig is ready, we'll let you know. It's only going to the track once before I sell it, so if you miss out, you'll have to catch the video. :lol: Unless of course, we get lucky and somebody local buys it, but I am not counting on that. :(

[facemelter71]

Im asking all the high dollar people i know if there lookin for a race car.

[Mista Bone]

"Mom, I know what I want for Christmas!"

[cstreu1026]

I think a lot of people want to see it go down the track. Whenever Craig is ready, we'll let you know. It's only going to the track once before I sell it, so if you miss out, you'll have to catch the video. :lol: Unless of course, we get lucky and somebody local buys it, but I am not counting on that. :(

The longer it takes to get all the bugs worked out the better. ;)

[Maximus]

I think a lot of people want to see it go down the track. Whenever Craig is ready, we'll let you know. It's only going to the track once before I sell it, so if you miss out, you'll have to catch the video. :lol: Unless of course, we get lucky and somebody local buys it, but I am not counting on that. :(

Im ready now!! Its just TT that needs some fine tweaking.:)

[Silver Bullet]

Wooo Hoooo!:D Good News!

[Maximus]

Ahhh, the tuning/dyno blues. Been here since 6pm and still no FULL pull yet.:(
We put a load on the roller to get some drivability tuned in and all was well at 10psi.
So we were getting ready to do a full pull and the passenger side exhaust decided to come off. Its fixed now, but we are munching on some Whiteys so....



Stay tuned.:)

[Silver Bullet]

Waiting..... on the edge of my seat..... Good luck....:D

[Maximus]

@$@%%#^@&^#&%&%@&%^&@&^@&^&^!!**@&*&! CAR!!!!!
:tard:


Stay tuned.:o

[DeckerEnt]

Calm Down dude.....roll out the crown and coke and chill for a sec. Now get back in there and get-er-done!!!!!LOL
What broke now??
Keith

[Maximus]

Wiring issues. I guess when Vinny had that lil Fire mishap it did more than we thought.:(


We WILL get it done....just gonna take some more time.

[Maximus]

OK, a new day to get TT running right.:)

Dave is doing a kick ass job on the front end alignment. Brandon (Pure Street Champ) is going over and inspecting some wiring issues...so hopefully we will have some good news to post up.:)

A BIG Thank you goes out to Andy, Matt Johnson, Blake, Brandon, Adam and Paul. They were here late last night helping with TT and were a HUGE help!
Stephanie was here also keeping an eye on Bodie.:)



Stay tuned

[quik lx]

I'm on my way over now!:cool1:

[Maximus]

I'm on my way over now!:cool1:

**Insert Superman theme music here!!!!**:bigthumb

Nothing like friends coming together to help other friends.:)

[facemelter71]

I had alot of fun last night.Gettin some of the bugs worked out on TT.Good times.

[Gregg@TFS]

Awesome!!!

I can't wait to hear how she does.

[Holly]

Nothing like friends coming together to help other friends.:)

Wow, I know it. Vinny would be SO proud.

[PonymanfiveO]

Working in the garage here on a project. I'll head that way with my wiring stuff in a lil bit. ;)

[Maximus]

Is there a Cliff anywhere near Cincy??:tard:

Tried quite a few things, hell we have ground wires running all over TT. STILL running like poo.


*insert saying here*

[facemelter71]

Have you tried a new MSD box under the dash.My coupe did that same stuff TT was doing last night.

[Maximus]

We tried that also.:(

We have more to try, but tomorrow is another day.:)

[DeckerEnt]

I know TT isn't coming but are you coming up to Tri-state saturday? You probably use a little break. Ha ha...
Keith

[facemelter71]

I have to work saturday.But ill be down after work.I leave at one .

[Maximus]

We THINK we found the problem.



Stay tuned.:)

[Paul408Notch]

We THINK we found the problem.



Stay tuned.:)

But don't stay tuned til Monday. Ran out of time today damnit.

[Silver Bullet]

Something simple overlooked?

:confused:

[Brandon Alsept]

Not super simple but kinda easy to overlook. So with any luck we will have really good news on Monday night;)

[Silver Bullet]

Not super simple but kinda easy to overlook. So with any luck we will have really good news on Monday night;)

Shoot, you should stay and get r done tonight....

I'm shooting up to K-Wood.... and would stop on over.;)

[DeckerEnt]

Great to hear things are working out.
Keith

[Paul408Notch]

Shoot, you should stay and get r done tonight....

I'm shooting up to K-Wood.... and would stop on over.;)

We would've stuck around, but most of us had other plans to take care of. Ah well, the car has waited this long, what's another few days?

[Maximus]

I can hardly wait till Monday.....Im excited to see if we actually found the problem. :)

I also uploaded some pictures, finally. (still havent found my camera)

date is wrong, duh
http://pic20.picturetrail.com/VOL86/503042/20574445/340271727.jpg

Yes, those are black ground wires going back to the battery. (we are trying EVERYTHING to get TT running the way it should)
http://pic20.picturetrail.com/VOL86/503042/20574445/340271772.jpg

http://pic20.picturetrail.com/VOL86/503042/20574445/340271796.jpg

We switched out the coil, ignition box, relays, double checked wires, etc etc etc
http://pic20.picturetrail.com/VOL86/503042/20574445/340271826.jpg

http://pic20.picturetrail.com/VOL86/503042/20574445/340271860.jpg


THANK YOU again to everyone that is/has worked on TT! You have no idea what a huge impact your help/generouisty means.:)



Stay tuned!!!!

[Maximus]

Well, we have throttle response and TT is sounding ALOT better. What a difference a 331 sounds like with some timing.:eek:

Paul, let us know when you can swing down and tune TT.:)

[Black Horse]

What did you find?

[Gregg@TFS]

Well, we have throttle response and TT is sounding ALOT better. What a difference a 331 sounds like with some timing.:eek:

Paul, let us know when you can swing down and tune TT.:)

:bigthumb:bigthumb

[Holly]

Paul, let us know when you can swing down and tune TT.:)


What evening will you guys be there past 6pm? I wanna stop by and hear it roar. :lol:

[Maximus]

What evening will you guys be there past 6pm? I wanna stop by and hear it roar. :lol:

Tonight!!:bigthumb

[Holly]

Tonight!!:bigthumb

I will stop by after work!

[facemelter71]

What time you gonna be there till? I role outta here at 6.

[cobrajoe]

What time you gonna be there till? I role outta here at 6.

x2 :bigthumb

[Maximus]

: )

We actually have throttle response, RPM and BOOST!!!!!and at 78 mph & a real fat 10-1 A/F, made 508 hp

[DeckerEnt]

SWEET!!!!!!!! Great to hear!!!
Keith

[nskaats]

I stopped by on lunch while Brandon made a couple quick pulls on the dyno...that thing sounds SICK when it hits boost. I almost lost control of my bowels.

[Stangman]

wow... I want to hear this car run... I might have to find my way down to Cincy Speed tonight as well!!

[Maximus]

Im gonna lock the doors!!:lol:

[Mista Bone]

have to work 6-9 tonight.......crap!

[facemelter71]

I "might" be able to get in.Ive got one of those all night CS lounge passes for the after hours crew.LOL.I think the wife wants to get a Wii,dont know yet.But let me know if your there late or if your gonna continue tomorrow when 6 rolls around.

[Stangman]

Im gonna lock the doors!!:lol:

I'll bang on the garage door til ya open it! :lol:

[Silver Bullet]

LOL I'm trained in getting around obstacles.... :AR15:

Keep us Posted... I'm on the edge of my seat.. again!:bigthumb

[Brandon Alsept]

15 PSI = 780rwhp@ 6200 rpm

Power still climbing like a rocket ship:cool1:

Will update later :cool2:

[plated]

dayum:cool2: good numbers

[Brandon Alsept]

Yeah not to shabby will throw another 1500 rpm and 15 more PSI hehehehe:cool1:

[MADMOD]

15 PSI = 780rwhp@ 6200 rpm

Power still climbing like a rocket ship:cool1:

Will update later :cool2:


Daymun!!!:rockon::rockon:

[Silver Bullet]

15 PSI = 780rwhp@ 6200 rpm

Power still climbing like a rocket ship:cool1:

Will update later :cool2:


Keep up the good work guys, That is AWESOME!

[nskaats]

Bad ass numbers, keep them coming!

[Black Horse]

I just heard on the news that a hugh rumble of thunder was heard near Paddock and Vine tonight...could it be??????

[Brandon Alsept]

Waiting for Craig to get back with more gas and then we should have some more #s for yalls:cool1:

[1992MustangDW]

holy crap good numbers

[Holly]

I could have stayed and watched them work on Twisted all night! But I needed to get home and get my heat on, it's 60 degrees in here... burrr!

You guys are doing a kick ass job, it looks good, sounds good, and gives me chills to hear it run like that.

And I'm really digging the purple wires inside!

I cannot wait to see it go down the track... hopefully Saturday.

Stay tuned.... ;)

[PonymanfiveO]

Yayyyyy!!!!

[k062693w]

Cool!!!! Glad to hear it's coming along!!!!!!!!
I want to see it make a pass or two as well....

[nskaats]

I guess I have to make a point to be at the Edge on Saturday.

[DeckerEnt]

That is awesome!!!! Good job guys!!!!:bigthumb:bigthumb
Keith

[Rick93coupe]

15 PSI = 780rwhp@ 6200 rpm

Power still climbing like a rocket ship:cool1:

Will update later :cool2:

Wow, thats awesome guys! At only 15psi too!:bigthumb

[Mustard]

Real nice #'s guys. How much you think is left in it?

[Brandon Alsept]

More Gremlins are showing up, Little Bastards!!!:mad:

[Rick93coupe]

Its got some decent size hair dryers on it, I'd say there's a bunch left in her.

[k062693w]

So will TT's track debut be at TriState or EdgeWater ???

[Maximus]

Looks like TS.

Had to call it a night. Ran into some issues:mad:, so TT is back on the lift to get it ready for the weekend.
Ill try and get some video, but we will have to wait on Blake for em.:)

Stay tuned!!


Good seeing ya tonight Holly!:)

[boostanggt]

I'm working on it now. :popcorn:

[Maximus]

I'm working on it now. :popcorn:

Its been an hour.:lol:

[Stangman]

15 PSI = 780rwhp@ 6200 rpm

Power still climbing like a rocket ship:cool1:

Will update later :cool2:

Wow! that is wild!!!

[Holly]

Looks like TS.

Had to call it a night. Ran into some issues:mad:, so TT is back on the lift to get it ready for the weekend.
Ill try and get some video, but we will have to wait on Blake for em.:)

Stay tuned!!

Good seeing ya tonight Holly!:)

It was good seeing you, Paul and Brandon too! And nice to meet Blake!

If I had been dressed appropriately (meaning jeans and a hoody), I probably would have pulled up a chair and stuck around later. I like watching you guys work on that thing, gives me a warm fuzzy feeling inside. :D

Let's hope the weather holds out for Saturday!

[Gregg@TFS]

15 PSI = 780rwhp@ 6200 rpm

Power still climbing like a rocket ship:cool1:

Will update later :cool2:

Awesome #'s :bigthumb:bigthumb

Now turn the wick up and put the big numbers down!!!!

:rockon:

[Maximus]

It was good seeing you, Paul and Brandon too! And nice to meet Blake!

If I had been dressed appropriately (meaning jeans and a hoody), I probably would have pulled up a chair and stuck around later. I like watching you guys work on that thing, gives me a warm fuzzy feeling inside. :D

Let's hope the weather holds out for Saturday!


With Halloween coming up, my trip to the dentist, my meeting with the Basketball coach, spend time with my girls....lets hope there is enough hours in the day to get TT ready for TS.:o

Things left to do:
-Fix exhaust so it doesnt blow off. Its done it twice on the dyno, and wouldnt be a good thing on the big end.
-Find a tach and get it installed.
-Bleed brakes
-Finish tuning TT
-Final route all grounds and button up the interior

Less talk, more work....Ill check in later.:)

[Maximus]

Awesome #'s :bigthumb:bigthumb

Now turn the wick up and put the big numbers down!!!!

:rockon:

Working on that. We need to get the driveability worked in also.



818 is the number so far.:)

[1992MustangDW]

wow nice

[Stangman]

So is it safe to say that TT push the 1,000Hp mark?

[Holly]

With Halloween coming up, my trip to the dentist, my meeting with the Basketball coach, spend time with my girls....lets hope there is enough hours in the day to get TT ready for TS.:o


Family comes first. If it doesn't make it to Tri State this weekend, it's not a big deal. Do what you need to do first! Believe me, spend as much time with your loved ones as you can, TT will still be there next weekend. ;)



So is it safe to say that TT push the 1,000Hp mark?

I'm looking for the paperwork from Paul's Automotive, where Vinny had it dyno'd two years ago. 918 or something like that keeps sticking it in my mind, because he kept saying he wasn't going to be happy until it reached the 1,000 HP mark.

[Gregg@TFS]

Working on that. We need to get the driveability worked in also.



818 is the number so far.:)

:rockon: brotha!!!!!!!!

[Brandon Alsept]

So is it safe to say that TT push the 1,000Hp mark?

I think that would be a safe bet on 25+PSI just have to let Paul do all his magic on the FAST and once it makes a full pull I think it could do welll into the 1000+ RWHP.

[Mista Bone]

Craig, I have 8000 rpm 5" Autometer sitting here, 3905 I believe, BLUE shift light, you gave me crap about it when I bought it from you.

http://i107.photobucket.com/albums/m307/bonespec/Honda/RR/gauges.jpg

[Maximus]

Craig, I have 8000 rpm 5" Autometer sitting here, 3905 I believe, BLUE shift light, you gave me crap about it when I bought it from you.

http://i107.photobucket.com/albums/m307/bonespec/Honda/RR/gauges.jpg

Did you cut the wires for a 4cyl? Shouldnt be a problem to solder them back.
If you wanna donate it, bring it down as soon as you can. Paul will be back tomorrow night to ,HOPEFULLY, finish up the tuning on TT and I would like to have everything buttoned up and ready BEFORE Friday.

Im sure the Blue shift lite will go good with TTs Blue Chite.

Thanks guy.:bigthumb

[FireStang02]

If that tach wont work, I wanna donate the cost of a new one. Let me know and I will paypal the total to you Craig.

[Maximus]

If that tach wont work, I wanna donate the cost of a new one. Let me know and I will paypal the total to you Craig.

Dude, thats Awesome!!

I was wondering what Chip(mista) was going to do minus his Tach??:(


TT has the sport Comp gauges. If we stay with that style, we need a #3905

http://store.summitracing.com/partdetail.asp?autofilter=1&part=ATM%2D3905&N=700+115&autoview=sku

http://www.jegs.com/i/Auto+Meter/105/3905/10002/-1


A less expensive option would be this one...#233905

http://store.summitracing.com/partdetail.asp?autofilter=1&part=ATM%2D233905&N=700+115&autoview=sku

http://www.jegs.com/i/Auto+Meter/105/233905/10002/-1

I can get either one a lil cheaper than Jegs or Summit. So I will leave the decision up to you. But PM Mista first before you do anything. :)


THANK YOU BOTH for stepping up!!:rockon:

[Maximus]

I think that would be a safe bet on 25+PSI just have to let Paul do all his magic on the FAST and once it makes a full pull I think it could do welll into the 1000+ RWHP.

We are crawling before we are running.:)

[Mista Bone]

I know I cut the wires for 4 cyl, I'll see about soldering them tonight.

[FireStang02]

Just post up what you find out.

[92coupe]

If that tach wont work, I wanna donate the cost of a new one. Let me know and I will paypal the total to you Craig.


That's AWESOME Guy!:bigthumb:bigthumb

[Mista Bone]

Would be just as easy, I'll pop $25 in on a new tach......

[FireStang02]

If you wanna do that Mista...thats awesome....Craig, give me the total minus $25 and I will have it sent ASAP.

[Mista Bone]

$40 sent just now via paypal.

[ibstrokin]

Feel the love, Kickass guys!!!!!!

[FireStang02]

$160.00 sent paypal. That should get it. Get whatever you think looks best Craig. If there is anything left, put it towards something else.

[DeckerEnt]

This is awesome. A bunch of guys pitching in to help another. This is what makes this place what it is. A huge "Thanks Guy" goes out to Craig for beginning this and an even Bigger one for all those pitching in!!!!:bigthumb:D:bigthumb
Keith

[Maximus]

This is what Vinny was about....Friends helping friends. I know he is smiling down on all his SBZ brothers....
You guys have no idea how greatful I am for all your help...all I can say,

THANK YOU!!

Hopefully we can get the wiring done tomorrow and make some decent numbers on the Dyno.:)

[Maximus]

$160.00 sent paypal. That should get it. Get whatever you think looks best Craig. If there is anything left, put it towards something else.

Hmm...WWVD (what would Vinny do)
I think he would save his coin up and go with the 3905. He had alot of time in TT so what would an extra week or two be at that point. Besides, the 3905 does look better and thats what we are trying to accomplish here.:)

The 3905 will be installed Thursday. (it takes a day to get it in) Pics will be up soon. (as soon as someone brings in a camera):lol:

[Mista Bone]

I would like to say three years ago I was down to nothing, I didn't lose hope, had friends help me (Ryan and others) and is now time to give back.

What comes around, goes around, both good and bad. Friends + Hard Work = Lasting results.....and ALOT of PRIDE.

WWVD????

B-R-A-K-E...........

I cannot pick up a can of brake cleaner without smiling...."CHEESE!!!"

[69Cobra]

This is cool guys!!! You guys ROCK!

[PonymanfiveO]

$160.00 sent paypal. That should get it. Get whatever you think looks best Craig. If there is anything left, put it towards something else.


That's fucking awesome! :bigthumb

I'll buy this guy a beer if I ever see him out!

thanks for helping out! :)

[FireStang02]

You are one of the few people ive actually met Matt, I sold ya the IPOD a while back.

[Maximus]

That's fucking awesome! :bigthumb

I'll buy this guy a beer if I ever see him out!

thanks for helping out! :)

YOU need to bring your ass down to the shop tomorrow. I need some help with TT so we can get it DONE.:)

[PonymanfiveO]

You are one of the few people ive actually met Matt, I sold ya the IPOD a while back.

Oh yeeeeaaa! thats right! Thanks man. btw, I still use my Ipod every damn day!:D


YOU need to bring your ass down to the shop tomorrow. I need some help with TT so we can get it DONE.:)


I was there today honkey. I'll be out of state working on a friends NMRA class car tomorrow. I'll give you a call when I get back in town tomorrow evening. :cool2:

[Mista Bone]

Craig, what is left to do?

I do nothing before work, just sit on my behind looking for another Part Time job to fit in with current job.

[facemelter71]

Yea ill be sittin at home after work tonight ( 6 ) and if your there after that let me know.All i think i have to do is swing out and pick up a rim in Miamitown.

[Maximus]

Things left to do.....

Bolt wheels back on.
Finishing routing wires.
Pack Chute that BRANDON released...Cracker ass:lol:
Finish tuning.
Order tach and install that tomorrow.

Thats about it.:)

[Stangman]

Pack Chute that BRANDON released...Cracker ass:lol:

Why wasn't there a video of this???? :lol:

[cstreu1026]

Pack Chute that BRANDON released...Cracker ass:lol:

Damn that thing must have been flying on the dyno! :lol:

[Maximus]

Things left to do.....

Bolt wheels back on....done
Finishing routing wires.
Pack Chute that BRANDON released...Cracker ass:lol:...done
Finish tuning.
Order tach and install that tomorrow....ordered

Thats about it.:)

WOOT, its getting there.:)

[Drivermod]

Awesome work guys. Wish I could help but Sherrie's been wiped out attending to our 3 week old so I've been taking care of the other three kids. Haven't been getting out much.

[Stang 38L]

Wow, its a fucking beast!!

[facemelter71]

I havent heard it yet with all 8 firing.But it sounded mean as hell when it was having issues.Bet it sounds like a beast now.

[boostanggt]

Ok I can't figure this video out :mad:. It recorded in the wrong format. If anyone on here is good with this stuff I can try and e-mail it to you as an attachment and see if someone else can get them on youtube for everyone to see. I'll keep the mini dvd with me and take to work with me tomorrow also so if anyone has any ideas let me know.

[facemelter71]

andrew.stacks@yahoo.com

Ill see what i can do.

[Maximus]

WOW!! Imagine that, TT is being a PITA again.:mad:


If I didnt have a Dentist appointment early in the AM, Id go hit Dickmans with Kevin.:lol:


Oh well, back to the grind.......

[Maximus]

Ok, not so bad...

808 @ 6400...Pig Rich!! (10.4)

Paul is tweaking as we speak.:)

[Silver Bullet]

Ok, not so bad...

808 @ 6400...Pig Rich!! (10.4)

Paul is tweaking as we speak.:)

Keep those rollers turning!:eek:

[orangedemon331]

Hell Yeah!!!!! Rock Out:popcorn:

[Maximus]

Ahhh, LEE's Fried Chicken!! After Dinner, we went out to do a pull. Hmm, shifter is acting up....WTF!!>?!?>! So we jack TT up and I crawl underneath. Looks like Vinny ran out of rivets. The Cable bracket was held in place by two machine screws (one was loose and the other was gone) So a drill and a rivet, all is good.


868 @ 6400, same boost level. Still a tad Fat, but we are slowly leaning on it. We are trying for 900 before we up the boost. We still have 10+ psi left, so hopefully........:)

[mustangjon]

keep up the good work:D I still havent had any damn time off to make it over there, working 67 hours again this week :(

[1992MustangDW]

looking good

[Silver Bullet]

Ahhh, LEE's Fried Chicken!! After Dinner, we went out to do a pull. Hmm, shifter is acting up....WTF!!>?!?>! So we jack TT up and I crawl underneath. Looks like Vinny ran out of rivets. The Cable bracket was held in place by two machine screws (one was loose and the other was gone) So a drill and a rivet, all is good.


868 @ 6400, same boost level. Still a tad Fat, but we are slowly leaning on it. We are trying for 900 before we up the boost. We still have 10+ psi left, so hopefully........:)

Wow! How many PSI was that?

[Maximus]

19-20psi.

We hit a CRAZY HP number, but we havent backed it up yet. :)


Im so excited, I gotta Poo.


Stay tuned.:lol:

[Silver Bullet]

Tuned in....:bigthumb

[cstreu1026]

Pump gas or race gas?

[k062693w]

Pump gas or race gas?

What do you think !!!:rolleyes:

[cstreu1026]

Well I have a pretty good idea but I figured I would ask any way.

[kennebellcobra]

We need #'s:lol: I can't take it:bangwall::D

[Maximus]

Race.

We were having some issues. We went from 868 to 849. So Paul pulled timing. Next run....BAM!! 1008.:eek: That cant be right. So we tried another pull...Nothing.:mad: Dyno spit out some shit and ended the run. WTF! Re-set the Dyno, made a pull (no changes) BAM. 968! Tried to verify with two more runs, Nothing. Keeps spitting up some message and ends the run. Ill be calling Dynojet after my Dentist appoinment in the am.:(

Other than the dyno issues, The FAST datalogger showed all good things. Nothing out of the ordinary, SAFE. So worse case, we show up to TS with 840+ RWHP. :cool1:

Till tomorrow.

[Silver Bullet]

Race.

We were having some issues. We went from 868 to 849. So Paul pulled timing. Next run....BAM!! 1008.:eek: That cant be right. So we tried another pull...Nothing.:mad: Dyno spit out some shit and ended the run. WTF! Re-set the Dyno, made a pull (no changes) BAM. 968! Tried to verify with two more runs, Nothing. Keeps spitting up some message and ends the run. Ill be calling Dynojet after my Dentist appoinment in the am.:(

Other than the dyno issues, The FAST datalogger showed all good things. Nothing out of the ordinary, SAFE. So worse case, we show up to TS with 840+ RWHP. :cool1:

Till tomorrow.
Just one thought... look at the fast and see how many lbs of fuel an hour you are using... this can also give you a good estimate of the HP your making to maybe back up what the dyno is saying.... just a thought.:confused:

[Paul408Notch]

I haven't been logging lbs of fuel. :( Closest thing I have is duty cycle, but that's not really going to help so much. I just added that in for future logs though, so if we do anymore, it'll be in there.

[Silver Bullet]

I haven't been logging lbs of fuel. :( Closest thing I have is duty cycle, but that's not really going to help so much. I just added that in for future logs though, so if we do anymore, it'll be in there.

Cool... I could compare my duty cycle on sum of my logs with your a/f. I don't think there would be a big difference between a turbo/blower.

[Paul408Notch]

Cool... I could compare my duty cycle on sum of my logs with your a/f. I don't think there would be a big difference between a turbo/blower.

The only issue is that our duty cycles may be way different. I have this one set up for 1.25ms in the operational parameters, so this 50% and your 50% would more than likely indicate different flow.

I think. :tard:

[Holly]

Next run....BAM!! 1008.:eek:

:eek2: :rockon:

No wonder Vinny kept showing up in my dreams last night.

I had a migraine, took some meds, and went to bed at 7:30, and he kept popping into my 10.5 hours of sleep ~ dreaming.

That is SO kick ass! And I told you Craig, that is what he was hoping for. ;)

[facemelter71]

............

[347sc]

:eek2: :rockon:


That is SO kick ass! And I told you Craig, that is what he was hoping for. ;)

I remember talking to him about what I thought it should make and we were right along the same lines. Had some good times helping him out with the car. Craig and everybody involved you guys KICK ASS!!!!

[nskaats]

Great numbers guys! Keep up the hard work. I can't wait to see the final results. I'm starting to think the 1000 HP mark was pretty conservative.

[MADMOD]

To Craig and everybody else that is helping out with TT. I would like to say Thanks for doing what you are doing for Vinny, Holly, and Stangbangerz.

[Maximus]

:eek2: :rockon:

No wonder Vinny kept showing up in my dreams last night.

I had a migraine, took some meds, and went to bed at 7:30, and he kept popping into my 10.5 hours of sleep ~ dreaming.

That is SO kick ass! And I told you Craig, that is what he was hoping for. ;)


We havent turned it up yet, that was only 20psi. But like I said, the Dyno was acting goofy.....well it probably was operator error.:tard:

:lol:

[1992MustangDW]

dyno doesnt know what to do with all that power

[Silver Bullet]

:eek2: :rockon:

No wonder Vinny kept showing up in my dreams last night.

I had a migraine, took some meds, and went to bed at 7:30, and he kept popping into my 10.5 hours of sleep ~ dreaming.

That is SO kick ass! And I told you Craig, that is what he was hoping for. ;)

If Vinny was in it, it had to Be A Great Dream!:angel:

[Stang 38L]

:eek2: :rockon:

No wonder Vinny kept showing up in my dreams last night.

I had a migraine, took some meds, and went to bed at 7:30, and he kept popping into my 10.5 hours of sleep ~ dreaming.

That is SO kick ass! And I told you Craig, that is what he was hoping for. ;)

I bet he's going crazy up there right now. Im sure he's proud as hell right about now :D.

[Stangman]

Will TT get the first "7 second" sticker? :D

[Evil_Capri]

To Craig and everybody else that is helping out with TT. I would like to say Thanks for doing what you are doing for Vinny, Holly, and Stangbangerz.

Agreed! Fantastic!!

[NXcoupe]

Awesome job guys! I've been following this, glad you got to see it to fruition. Vinny would have wanted it this way for sure. Outstanding job!!

[Maximus]

^%&#*@^#&@^#@^#@*(&^#@*&^#@(^@CAR!!!!:mad::mad::mad::mad:

[Stangman]

What's wrong this time???

[Holly]

^%&#*@^#&@^#@^#@*(&^#@*&^#@(^@CAR!!!!:mad::mad::mad::mad:



Do I dare ask?

[Maximus]

I swear Ive inheritied Vinnys luck....No track this Saturday.:( The tranny decided it does not like 1st gear. I was trying the Transbrake out and I wanted to make sure the 2-step was working. Well it works, but as soon as the boost came in, TT lurched backwards!!:eek:I quickly let go of the buton and TT went forward. At least it still has Drive, so I got it back into the shop.

Also figures, a very good, potential, LOCAL guy was really wanting to see TT make a few hits.


DAMN IT!!!!!!!!!



Stay tuned....:(

[1992MustangDW]

o boy

[Timido]

Try adjusting the Band on the side of the trans before you pull it. It is outlined in the Performance Glide book you guys usually stock. At least the exhaust wont get in the way when you remove the trans. You might try Jim Widener maybe he doenst have alot going on. He has done a great job with my Glide.

Widener Automotive Incorporated
(812) 932-2025
68123 E Pearl St, Batesville, IN 47006

[Maximus]

Try adjusting the Band on the side of the trans before you pull it. It is outlined in the Performance Glide book you guys usually stock. At least the exhaust wont get in the way when you remove the trans. You might try Jim Widener maybe he doenst have alot going on. He has done a great job with my Glide.

Widener Automotive Incorporated
(812) 932-2025
68123 E Pearl St, Batesville, IN 47006


Ill try, but the fluid smells like ASS!! BURNT ASS to be exact....although I would be guessing what Burnt Ass really smells like.:tard:


Thanks again for Lunch!!!:bigthumb

[Silver Bullet]

I think Jim built that tranny for Vinny.:confused:

[k062693w]

DAMN !!! That Sucks Guys......

[Silver Bullet]

Did you ever figure out what was going on with the dyno? How much HP was TT actually making?

[Timido]

The Trans was Used Vinny Traded someone for it.

[Timido]

I think those cheese coneys are haunting me.....

[Maximus]

Did you ever figure out what was going on with the dyno? How much HP was TT actually making?

Enough to give #1 & #2 a run for their money:lol: :D

[Silver Bullet]

Enough to give #1 & #2 a run for their money:lol: :D

It's all good!:bigthumb

[Maximus]

The Trans was Used Vinny Traded someone for it.

Well it held up for a little while.:tard:

Ill be making a few phone calls tomorrow and calling in some favors. (this is getting expensive :( ) HOPEfully we can get this tranny re-built, cooling lines flushed (that is a step alot of people forget when they rebuild a trans) and the converter flushed.

[Maximus]

It's all good!:bigthumb

Hey, someone has to motivate you two to run all out. :cool1:

[MustangChuck]

Yeah bad luck seems to be the thing these days. I should know....:rolleyes:

[85_SS_302_Coupe]

Damn man that sucks. Is that a powerglide in it?

I wanna see dyno numbers :rockon:

[69Cobra]

Stick it!!!!:bigthumb:bigthumb:lol:

G-Force 5 speed here we come!!!!:D

[PonymanfiveO]

Call it bad luck if you want. I call it part of owning a high HP car. That shit happens...sometime over and over again.

Craig, you may as well just give Holly an offer on the car. Your liable to end up having a ton of money tied up in that damn thing just trying to get it to run right so she can sell. :(

[MustangChuck]

Ponyman does have a point. If she intends to sell, why not buy it from her so that it could be something to remember Vinny by?

[Maximus]

Call it bad luck if you want. I call it part of owning a high HP car. That shit happens...sometime over and over again.

Craig, you may as well just give Holly an offer on the car. Your liable to end up having a ton of money tied up in that damn thing just trying to get it to run right so she can sell. :(

Oh I know, Im just venting cause alot of people wanted to see TT at TS. (ME included):)

No, Im just on a mission to finish what Vinny started. Besides, I have my own project, when it comes home, Ill be busy with it....oneday:tard:

[Maximus]

Ponyman does have a point. If she intends to sell, why not buy it from her so that it could be something to remember Vinny by?

I have many many memories of Vinny, and when someone reminds me of some of the parties, a few more memories!!:eek::lol:

[Timido]

I have many many memories of Vinny, and when someone reminds me of some of the parties, a few more memories!!:eek::lol:

Some of the memories from the partys I couldnt remember the next day;)

At least the trans sounds like clutchs and bands and not like mine sounded like. I shifted it into 2nd and it went BOOM and then sounded like a box of gravel.

[69Cobra]

Yeah the box of gravel sound is something I really don't like hearing.

Craig I know a tranny guy as well if you need one. I don't think he will just donate everything but I'm sure he can fix it very reasonable.

Just let me know.

[mustangboy]

G-Force 5 speed here we come!!!!:D

Yeah I think Craig knows where one of those is sitting.

[Maximus]

Yeah I think Craig knows where one of those is sitting.

Some guy in Indiana has it now.

[DeckerEnt]

Just a reminder to everyone that Craig is accepting $$$$ donations for TT. I think he is at the point where we all should step up. We can't let Craig do all this on his own.
I'll stop by early next week and drop off some dead presidents.
Keith

[mustangboy]

Some guy in Indiana has it now

Glad to hear you sold it, now get TT done so you can finally get that coupe back on the road.

[Maximus]

Just a reminder to everyone that Craig is accepting $$$$ donations for TT. I think he is at the point where we all should step up. We can't let Craig do all this on his own.
I'll stop by early next week and drop off some dead presidents.
Keith


EVERYONE that has donated, I have a list at the shop....I COULDNT DO THIS WITHOUT YOU!!!! You guys are the reason TT is getting finished sooner than later.:)

THANK YOU!!!

[Maximus]

Glad to hear you sold it, now get TT done so you can finally get that coupe back on the road.

Thats a WHOLE different story there.:lol:

[zlou363lx]

i want to see the car! lol

i think that i may come down there to see TT in person tomorrow before i have to go off to work if that's cool with you, craig?

[cobrajoe]

Craig let me know what you come up with. My father in law owns Lattco Transmission in KY over by Keith's shop.

[RACEME]

Oh I know, Im just venting cause alot of people wanted to see TT at TS. (ME included):)

No, Im just on a mission to finish what Vinny started. Besides, I have my own project, when it comes home, Ill be busy with it....oneday:tard:

If you talk to Widener, I can do any of the transporting since I am near both or you every day.

[Maximus]

If you talk to Widener, I can do any of the transporting since I am near both or you every day.

I talked to Jim today. He is going to fix the tranny (labor free) and all we have to do is pay for parts. So hopefully TT didnt eat a bunch of stuff in the tranny:lol: Jim also said that he could get the converter flushed also. So I guess I have to go pull the trans now.:tard:
Tim, Ill call ya when we get a lift cleared and the trans out!:)

Heres Jims info.....

Widener Automotive Incorporated
(812) 932-2025
68123 E Pearl St, Batesville, IN 47006

If you all get a chance, call him and tell him Thank you for helping.:bigthumb

[RACEME]

I talked to Jim today. He is going to fix the tranny (labor free) and all we have to do is pay for parts. So hopefully TT didnt eat a bunch of stuff in the tranny:lol: Jim also said that he could get the converter flushed also. So I guess I have to go pull the trans now.:tard:
Tim, Ill call ya when we get a lift cleared and the trans out!:)

Heres Jims info.....

Widener Automotive Incorporated
(812) 932-2025
68123 E Pearl St, Batesville, IN 47006

If you all get a chance, call him and tell him Thank you for helping.:bigthumb

Ill pm ya my cell. If Jim wants the whole car, I can bring the truck and trailer on Monday.

We need to make sure and flush the trans cooler that is under the rear area.

You might give Gary a call also. He tends to have alot of spare glide parts.

Jim mike like a trade for some dyno time.

[Maximus]

Ill pm ya my cell. If Jim wants the whole car, I can bring the truck and trailer on Monday.

We need to make sure and flush the trans cooler that is under the rear area.

You might give Gary a call also. He tends to have alot of spare glide parts.

Jim mike like a trade for some dyno time.

Tranny will be out in about 30-45 minutes. COME GET IT!!! :)
We are closing at 5pm today, so call me first.:bigthumb

[RACEME]

Tranny will be out in about 30-45 minutes. COME GET IT!!! :)
We are closing at 5pm today, so call me first.:bigthumb

dialing....phone!

[Maximus]

dialing....phone!

Answered!!!:bigthumb

[Stangman]

the Cincy Speed Play-by-play! :lol:

[MrsAPE]

the Cincy Speed Play-by-play! :lol:

ain't it great?! :cool1:

[Stangman]

ain't it great?! :cool1:

yep, It's a helluva update!

[MrsAPE]

Well, Craig does aim to please!!

[Maximus]

the Cincy Speed Play-by-play! :lol:

Im pissed cause I dont have my camera to post up more pics.:(

[RACEME]

Im pissed cause I dont have my camera to post up more pics.:(

Ease up buddy....I have mine with me. I'll just sneak out a little early. See ya about 2:30

[facemelter71]

Ill try to swing out saturday morning and snap some pics also and try to get that run from the dvd posted on here.

[Maximus]

Tranny is on its way to Jims. :bigthumb

Ill see you Saturday Andy.




HAPPY HALLOWEEN everybody!!! :cool1:

[Timido]

If anyone needs any work done on their cars and live in or around Batesville check out Jims shop. They work on just about anything. Jim is a very experienced racer and knows his way around just about anything. From a 93 daily driver escort to a 7.40 Mustang.

Widener Automotive Incorporated
(812) 932-2025
68123 E Pearl St, Batesville, IN 47006

[1992MustangDW]

wish I knew how to operate paypal, I couldnt donate alot but every little bit counts.

[Maximus]

wish I knew how to operate paypal, I couldnt donate alot but every little bit counts.

You are correct, EVERY little bit adds up quick!! AND is GREATLY APPRECIATED!!:)

:sbowns:

[1992MustangDW]

Ok so hear the deal I was in bad wreck. So all my money I get, gets put on a card for me. I have a pay pal if anyone can pm me and tell me how to add that card i can donate you some money.

[facemelter71]

Ok so hear the deal I was in bad wreck. So all my money I get, gets put on a card for me. I have a pay pal if anyone can pm me and tell me how to add that card i can donate you some money.

You should be able to log onto your account and they should have steps on there on how to add a card.

[RACEME]

Trans is at Jims. He sounded like if it was only first gear gone then that would be a quick and easy fix. He also was pretty sure he built it originally. We should know something early next week.

[Mista Bone]

If the money is direct deposited to your checking account and you have a debit card for it, you link to the debit/credit card.

I also have a paypal debit card, instant access to funds.

I will not lie, this SAVED MY ASS when I was broke and selling items on ebay to eat. Free internet at the library as well.

[Silver Bullet]

. He also was pretty sure he built it originally. We should know something early next week.

Thats what I thought.....;)

[mustang8998]

Craig, I went ahead and got 5 gallons, of Hy-Gard. I came back down to the shop, but everyone was gone (sign read you were closing @ 5:00 and I got there @ 4:45).

[Maximus]

Craig, I went ahead and got 5 gallons, of Hy-Gard. I came back down to the shop, but everyone was gone (sign read you were closing @ 5:00 and I got there @ 4:45).

SWEET!!

Go figure, I left at 4 to get home for Trick or Treatin (My daughters first one!) and I told the rest of the crew to leave at 5.:rolleyes:

[mustang8998]

SWEET!!

Go figure, I left at 4 to get home for Trick or Treatin (My daughters first one!) and I told the rest of the crew to leave at 5.:rolleyes:

Ooops! Hope I didn't get anyone in trouble. :o

Do you need it, before Monday?

I'll give you a call.

[Maximus]

Ooops! Hope I didn't get anyone in trouble. :o

Do you need it, before Monday?

I'll give you a call.

Monday is cool.:bigthumb

[RACEME]

tranny is fixed! I picked it up a few minutes ago. I will drop it off at cincy speed around 11:00 on monday!

[PonymanfiveO]

YES!!!!

[DeckerEnt]

How bad was it?? If it is fixed this quick, had to be something minor. Good news!!
Keith

[Timido]

Tim if taking the trans down is not in your schedule for any reason. Give me a call I can take it down no problem.

[Timido]

The last time I had any problems with my trans it was like a $2 sealing ring that went bad and I thought it was screwed. Little fressen up and all was well

[Maximus]

WOOT!!

Is E20 still doing T&T on Fridays?:)

[kennebellcobra]

WOOT!!

Is E20 still doing T&T on Fridays?:)

Yes they are!

[mustang8998]

Tri-State has one more T&T also.

[Maximus]

Tri-State has one more T&T also.

Well it seems like a couple of the Big Boys wont run there...:lol:

[quik lx]

Well it seems like a couple of the Big Boys wont run there...:lol:
Girls:lol:

[cobrajoe]

Looks like a trip to E20 then Friday night!!!!!

[Maximus]

Looks like a trip to E20 then Friday night!!!!!

As long as the weather holds AND Holly allows it.:)

[Kevin1989]

so is the car done? and whats e20? edgewater?

[DeckerEnt]

The trans is fixed and will probably go in on monday. E20 is edgewater..
Keith

[RACEME]

Tim if taking the trans down is not in your schedule for any reason. Give me a call I can take it down no problem.

Jim said it was just the band, as that is what works first gear in a glide.

I can take it down no problem. I only work 7 miles from Cincy speed so it isn't an issue.

[Mista Bone]

in my best Vinny voice.....


"Dude, you guys rock!"

[Holly]

As long as the weather holds AND Holly allows it.:)


Let's do this... weather permitting of course!

[1992MustangDW]

sweet

[RACEME]

Transmission has been delivered back to CS. We all need to kick in a couple bucks to cover the fluid. Craig should not have to do it out of his pocket.


Craig...it's been 1/2 hour...Is it back in yet?

[Maximus]

Let's do this... weather permitting of course!


WOOT!!!:bigthumb

[Maximus]

Transmission has been delivered back to CS. We all need to kick in a couple bucks to cover the fluid. Craig should not have to do it out of his pocket.


Craig...it's been 1/2 hour...Is it back in yet?


Actually, Jeff and I have that covered. :)

LOL!! No, not yet.

[89notch]

Its going to be very cool watching this car go down the track. I was out of town for a week and couldn't believe what all happened with this car while I was gone. So you are shooting for E20 this weekend?

[Maximus]

Its going to be very cool watching this car go down the track. I was out of town for a week and couldn't believe what all happened with this car while I was gone. So you are shooting for E20 this weekend?

Welcome back.
Can you get me the contact info from where you got the wastegates? I would like to send them something.:cool1:

[Mista Bone]

weather forecast is NOT looking good.......hope they are wrong!

[RACEME]

Craig, don't forget to retorque the trans pan after you warm it up.

[Silver Bullet]

Let's do this... weather permitting of course!

Im planning on being there also...;)

[Maximus]

Im planning on being there also...;)

:bigthumb

[Holly]

Im planning on being there also...;)

Are you and Craig going to race them? :lol:

[Silver Bullet]

Are you and Craig going to race them? :lol:

Only one bad part about that... I want to see it go down the track!:angel:

It will be like the Good Ole Days!:bigthumb

[Rob]

okay i got it ! I will drive the Silver Bullet and craig can drive Twisted Twins and Terry you can watch both go down the track ! Everyone wins!

[Silver Bullet]

okay i got it ! I will drive the Silver Bullet and craig can drive Twisted Twins and Terry you can watch both go down the track ! Everyone wins!

HMMMMMMMM..... Why didn't I think of that!:eek:

[Rob]

Since im a little lighter (not calling you fat) the car should pics up a little :lol:

[89notch]

Welcome back.
Can you get me the contact info from where you got the wastegates? I would like to send them something.:cool1:

http://jgsturbo.com/index2.html

[bobtsgt]

Since im a little lighter (not calling you fat) the car should pics up a little :lol:

now you will have to make some custom seat brackets so your little legs can reach the pedals :flipoff:

[Maximus]

http://jgsturbo.com/index2.html

Thanks! Anybody in particular I should address the package to?

[Maximus]

Are you and Craig going to race them? :lol:

HELL NO!!! Terry is all over the track and we have no idea how TT will launch or run........well maybe after a few shake down runs.:lol::)

[Timido]

Any other hickups or needs let us know.

[Silver Bullet]

HELL NO!!! Terry is all over the track and we have no idea how TT will launch or run........well maybe after a few shake down runs.:lol::)

That's exactly what I was thinking!

[Holly]

HELL NO!!! Terry is all over the track and we have no idea how TT will launch or run........well maybe after a few shake down runs.:lol::)



I know, I was just kidding. You know I don't want TT in "race mode" right now. I just want to see what it will do, with somebody driving it that knows how to drive it. And that ain't me. :tard:

[Maximus]

I know, I was just kidding. You know I don't want TT in "race mode" right now. I just want to see what it will do, with somebody driving it that knows how to drive it. And that ain't me. :tard:

Ya know we can work on that till TT is sold. Especially since we got the boost controller working correctly. (IE. start you at 4 lbs and go up :cool1:)

[Holly]

Ya know we can work on that till TT is sold. Especially since we got the boost controller working correctly. (IE. start you at 4 lbs and go up :cool1:)

Well, if it doesn't sell over the winter, we'll talk about that next spring. ;)

[Maximus]

I swear, this car.......:mad::lol::lol:

Tranny is back in and all hooked up. We were looking over the front and noticed that the pass. wheel was rubbing the IC tubing when its turned hard left. Not to big a deal, dont turn all the way left...Im NOT like that. We are going to cut and weld the tubing so that it does NOT rub. I am NOT raising TT back up, it looks too sweet wheres it at. So thats where we stand right now.
If I can figure Kennys camera (THANKS KENNY!!) Ill get some pics and post em up.
Once all that is done, we will strap TT back down and do a few more pulls to verify that 1008 number. We might even turn it up a "few pounds" to see what Vinnys hard work really has in it.

Two words I put here.....

[Byrd Man]

Well, if it doesn't sell over the winter, we'll talk about that next spring. ;)

Holly, when TT makes it to the track. I think you should make a couple passes down the track yourself. Have the boost controller and tune backed off. Footbrake it, ease into the throttle and enjoy every second of it. :) I think you'll be glad you did.

Lifes about opportunities and experiences. I see this as a great memory and experience for you to cherish. One that we all will long remember.