View Full Version : turn signal issue
TONYT
09-14-2008, 09:57 AM
on my 91 fox the turn signals stopped working
they dont light up when the turn signal lever is activated
the four ways or hazards work fine when the switch is pushed
the fuse for the turns shows good
as always i'm at a loss ,so can someone here shed some light on this for me plz
oh yea the air bag light in the cluster has started to just flash,just noticed it cpl days ago
mrstang-gt-46
09-14-2008, 10:09 AM
t/s switch in colum
dedpedal
09-18-2008, 06:46 AM
Theres a wire that goes into the colum connector that isnt clipped in from the factory. Sometimes it works its way out. I had this on my 88 when I pulled the dash and a couple others had it too. I dont remember which wire it was (color) but it feeds power to the switch.
mustang8998
09-19-2008, 02:17 PM
What about the flasher, itself. There is a separate flasher, that operates the hazard lights.
TONYT
09-20-2008, 05:16 AM
the hazards work fine which flasher are u refering to,,,will check on the colum wire thingie
There are 2 seperate flashers, one for the hazard lights and one for the turn signals. Also, check the grounds behind the headlights.
mustang8998
09-20-2008, 11:13 AM
the hazards work fine which flasher are u refering to,,,will check on the colum wire thingie
Tony, on my '89, there is a flasher in the fuse panel and one mounted up behind the gauge cluster, to the left of the steering column. I don't know for sure, which is which. Some models have one behind the glove box and some have one, on the back side of the fuse panel. I guess you'll have to look around for it.
TONYT
09-21-2008, 09:16 AM
thanx will check all those locations
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.