Alignment

[wolverine8490]

Anyone know of a decent alignment shop around the NKY area? I put the eiback pro-kit on my 96GT and had a hole in the wall shop align it. I think they made it worse than it was to begin with. I have been reading online and most say I should not need camber plates for a 1.5" drop, so I would like to see if another shop can fix it.

[bobtsgt]

most of the time you need plates for anything lower then 1.2". Don't know of any in NKY but there are some places out here on the eastside. Bethel frame and alignment and Tarvins on the outskirts of Batavia.

[wolverine8490]

Cool, thanks for the help. I was checking out on Summit racing this morning, and I came accross some caber bolts. They are supposed to be able to add an additional +/- 1.75 degrees of camber. For $23.00 I guess it is worth a shot. I just don't want my tires to get ate up so quick.

[bobtsgt]

the camber bolts should be in your car from the factory. They are two bolts that have essentrics on them. One per side that attaches the strut to the spindle. I think they go in the top holes. Actual plates will help along with the factory bolts. If your not doing any coilovers you can run a nice UPR plate or for coilovers do a 4 bolt MM plate.

[wolverine8490]

Thanks for the help again. I am going to work on it this weekend, and hopefully get it in for an alignment on Monday.

[bobtsgt]

cool. best of luck to ya :bigthumb