301.5hp/338.6tq N/A w/ a STOCK CAM!!!!

[12seclx]

Just wanted to say thanks to Dayton Performance for putting up with me today... and for helping me make the most power the car has made....

1st pull was 294hp/329tq.. (I ran 11.99 @ 112.16mph) on this tune...

best pull was 301.5hp/338.6tq.... I'm hoping to see 11.89 on this tune but that's just a crazy goal of mine... :rolleyes: Maybe once the Fall air rolls around... but, on this pull, the temp was 83* and it was around 12 o'clock... The air didn't feel terrible but nothing compared to the October air...

I'm very pleased with the results to say the least..... :D

[Steves LX]

Just wanted to say thanks to Dayton Performance for putting up with me today... and for helping me make the most power the car has made....

1st pull was 294hp/329tq.. (I ran 11.99 @ 112.16mph) on this tune...

best pull was 301.5hp/338.6tq.... I'm hoping to see 11.89 on this tune but that's just a crazy goal of mine... :rolleyes: Maybe once the Fall air rolls around... but, on this pull, the temp was 83* and it was around 12 o'clock... The air didn't feel terrible but nothing compared to the October air...

I'm very pleased with the results to say the least..... :D

Good #'s there Curt but you wont be pleased come Saturday. You better be on your A game.:lol::lol::lol: Boy I hope I can back this up or I'm in trouble.

[12seclx]

Good #'s there Curt but you wont be pleased come Saturday. You better be on your A game.:lol::lol::lol: Boy I hope I can back this up or I'm in trouble.

Yeah, I think you're gonna be in trouble...

I never told you what it made on the shot.....

Muhahahahaha!!!!!! :rockon:

[Mustard]

nice #'s man. Mike has one nice Dyno

[denial]

i was there to witness the numbers. He made some nice pulls. Great looking notch as well.

[kennebellcobra]

Congrats:bigthumb Did you do any with and without the intake wrap?

[mustang8998]

Nice numbers man!

Steve, your sooo, in trouble.

[PonymanfiveO]

Just wanted to say thanks to Dayton Performance for putting up with me today... and for helping me make the most power the car has made....

1st pull was 294hp/329tq.. (I ran 11.99 @ 112.16mph) on this tune...

best pull was 301.5hp/338.6tq.... I'm hoping to see 11.89 on this tune but that's just a crazy goal of mine... :rolleyes: Maybe once the Fall air rolls around... but, on this pull, the temp was 83* and it was around 12 o'clock... The air didn't feel terrible but nothing compared to the October air...

I'm very pleased with the results to say the least..... :D


congtats on the big numbers guy!
You should be deep in the elevens with that killer tune.
I went an 11.96 @ 111mph at edgewater on a horrible test-n-tune night friday before last in mega bad air. My car made 291 hp on the Modular Depot dyno a few weeks ago. our combos are pretty close I think.

[Qtr milerocket]

Congratulations Curt I suspected that there was 300 rwhp hiding in there.................and now the wait for the cool fall air! ;)



Peace :cool2:




James

[12seclx]

Well, thanks for the comments denial...
kennebell: no intake wrap but I swear it works on my car or perhaps the DA changed since it was getting later in the night.... :rolleyes:
mustang8998: You are right... Steve is in for a showdown... One that involves me flippin' on the hazards at the 1000' stripe...:coo1:
James: Thanks! I was very happy to see it happen... Finally!

Matt: I don't know how close we'll be... Dyno numbers are only part of the equation as I'm sure you are well aware of... RPM range, weight, sixty foot are very critical factors to look at as well... But, if it goes any faster than 11.99, I'll be happier than a double p*cker'd dog... :lol:

[PonymanfiveO]

lol, good stuff!

Your gonna run UMTR saturday right? I cant wait to see your car.
I havent weighed my car yet but I suspect it is somewhere between 3,000 and 3,200 lbs. with driver. The car usually goes 1.56 or 1.55 in the sixty foot and I shift it at 5,800rpm.

I'll be sure to stop by and shoot the poo with ya saturday! :bigthumb

[Steves LX]

Nice numbers man!

Steve, your sooo, in trouble.

Negative not yet. Curt's going to have to put the bottle on his car for me to be so in trouble. Now on all motor I may be in trouble. But if things work the way I intend them to work out he may indeed have another thing coming. I wont know for sure until tomorrow though.

[Jeff88coupe]

Curts little P head motor coupe + 150 shot + 28" tires ='s high 10's:cool1::coo1:

[12seclx]

Curts little P head motor coupe + 150 shot + 28" tires ='s high 10's:cool1::coo1:

Thanks Jeff....

It's pretty nice how everything has worked out for me...
I feel pretty fortunate... :bigthumb

[Maximus]

Just wanted to say thanks to Dayton Performance for putting up with me today... and for helping me make the most power the car has made....

1st pull was 294hp/329tq.. (I ran 11.99 @ 112.16mph) on this tune...

best pull was 301.5hp/338.6tq.... I'm hoping to see 11.89 on this tune but that's just a crazy goal of mine... :rolleyes: Maybe once the Fall air rolls around... but, on this pull, the temp was 83* and it was around 12 o'clock... The air didn't feel terrible but nothing compared to the October air...

I'm very pleased with the results to say the least..... :D


Very Cool....You will have to bring it back down here so we can compare apples to apples.

Your last pull down here was...293.59HP/334.35TQ:bigthumb

[12seclx]

Yeah, that would be pretty cool...
Maybe this time I won't be rushed off the rollers...???? :eek:

:wave::pump::rockon:.............:nono:

[Maximus]

Well Heck, Ill just charge ya normal hourly price and you can have it for as long as you like!:wave::lol:

[92BlackStang]

Well Heck, Ill just charge ya normal hourly price and you can have it for as long as you like!:wave::lol:
sounds like a deal there i say you get there around 9 am leave about 6pm :lol: Try everything for that extra lil bit

[12seclx]

Well, Michael didn't charge me hourly... and I had it tied for a LONG time... :bigthumb