trevnut
06-22-2008, 06:36 PM
I got a 79 ghia coupe for $200. i has a decent black paint job and was mostly all black interior. it had some newer gray seats and a newer gray dash. i have a complete black interior in it now. manual windows and locks.
i have installed the following goodies:
CHASSIS
Wolfe Racecraft 10pt cage
Wolfe thru-the-floor subframes
AutoWeld chassis rear coil-over setup
Baseline Suspensions pro launch #3 upper control arms
Baseline Suspensions track locator
custom made lowers 1 5/8 .120 wall with 3/4 hiems
upr k-member and a-arms
strange 10-way struts with 150lb 14" coilovers
Aerospace Components front and rear drag brakes
Aerospace Components manual master cylinder
Bindo line-loc
Bogart D-10's 15x3.5 with 2.5 backspace 26x7 mt sportsman tires 15x10 6.5 backspace with 28x10.5 et drag
DRIVETRAIN
351W
AFR 205's
Camshaft Innovations solid roller (nitrous cam)
Super Vic intake
Wilson plate with NX solenoids
Pro-Systems 1000HP
2" primary / 3.5" collectors
3.5" X-Pipe
3.5" Magnaflow race mufflers
Redneck Performance C4
3800 converter
aluminum driveshaft
welded 8.8
strange 33 spline axles
strange 33 spline spool
strange c-cilp elims.
ford 3.73 gears
rear girdle
still has stock hood and almost all of the chrome trim around the windows. i have tried to get the car as light as possible. i have had it out and made a few shakedown passes but nothin whole-hearted. i have seen some decent short-times but still a lil unstable after about 400'.
im going to put a ARB in it and see if it will leave straight and quit twistin the body. the current ARB is not working.
http://i104.photobucket.com/albums/m161/trevnut/PICT0257.jpg
http://i104.photobucket.com/albums/m161/trevnut/PICT0223.jpg
http://i104.photobucket.com/albums/m161/trevnut/PICT0253.jpg
http://i104.photobucket.com/albums/m161/trevnut/PICT0254.jpg
http://i104.photobucket.com/albums/m161/trevnut/79launch.jpg
http://i104.photobucket.com/albums/m161/trevnut/79rollin.jpg
i have installed the following goodies:
CHASSIS
Wolfe Racecraft 10pt cage
Wolfe thru-the-floor subframes
AutoWeld chassis rear coil-over setup
Baseline Suspensions pro launch #3 upper control arms
Baseline Suspensions track locator
custom made lowers 1 5/8 .120 wall with 3/4 hiems
upr k-member and a-arms
strange 10-way struts with 150lb 14" coilovers
Aerospace Components front and rear drag brakes
Aerospace Components manual master cylinder
Bindo line-loc
Bogart D-10's 15x3.5 with 2.5 backspace 26x7 mt sportsman tires 15x10 6.5 backspace with 28x10.5 et drag
DRIVETRAIN
351W
AFR 205's
Camshaft Innovations solid roller (nitrous cam)
Super Vic intake
Wilson plate with NX solenoids
Pro-Systems 1000HP
2" primary / 3.5" collectors
3.5" X-Pipe
3.5" Magnaflow race mufflers
Redneck Performance C4
3800 converter
aluminum driveshaft
welded 8.8
strange 33 spline axles
strange 33 spline spool
strange c-cilp elims.
ford 3.73 gears
rear girdle
still has stock hood and almost all of the chrome trim around the windows. i have tried to get the car as light as possible. i have had it out and made a few shakedown passes but nothin whole-hearted. i have seen some decent short-times but still a lil unstable after about 400'.
im going to put a ARB in it and see if it will leave straight and quit twistin the body. the current ARB is not working.
http://i104.photobucket.com/albums/m161/trevnut/PICT0257.jpg
http://i104.photobucket.com/albums/m161/trevnut/PICT0223.jpg
http://i104.photobucket.com/albums/m161/trevnut/PICT0253.jpg
http://i104.photobucket.com/albums/m161/trevnut/PICT0254.jpg
http://i104.photobucket.com/albums/m161/trevnut/79launch.jpg
http://i104.photobucket.com/albums/m161/trevnut/79rollin.jpg