89 GT Turbo Vert

[Brian-Mc]

89 GT Convertible, Red with Black Cloth Top. 306 with TFS Track Heat heads and intake setup. E303 Cam, 1.6 TFS rockers, balanced rotating assembly, 42 lb injectors with fuel rails and 255 HP pump and ProM 77 Meter. Single 60-1 TTI Turbo Kit. Tremec 3550 Trans with Spec Stage 3 clutch, BBK Upper and Lower Control Arms, Subframe connectors, 3.55 rear end with 31 spline 5 lug axles. Disc brakes all the way around. 5 lug Bullitts. Crame Cams Fireball HI-6 Ign box and crane cams livewire plug wires. Tweecer Tuner.

The body is the next thing that needs attention in my opinion with the interior needing some updates. The only thing keeping me from driving the car outside of gas prices is the turbo header. The flange has been flattened over the years and become somewhat thin. I have some new 0.5 inch flanges that needs to be welded into place. I have yet to do this as my time is spread quite a bit. If this car sticks around for the next few weeks/months, I will be fixing this so that I can atleast drive it some while it is nice. I do have some black 95 V6 Seats that I will be adding into the car sometime if it stays as well.

The car has gone 11.88 @ 118 mph on 26 x 9 Hoosier slicks and 11.91 @ 119 mph on Mickey Thompson drag radials (first time ever on DR's)


Have lost some interest in the car and possibly feeding a new one. I am looking for a street bike. I may trade for a bike. I may be missing some things... please don't hesitate to ask. The car is located in Georgetown.

[Brian-Mc]

more pics.... will locate some interior pics soon.

Brian

[Brian-Mc]

Forgot to add price.. sorry...

$6800 obo

[Katmandu]

Forgot to add price.. sorry...

$6800 oboDamn dude! Your giving it away at that price! :eek:

[brncoupe5.0]

Buy it katmandu if 6800 is such a great deal.

[Katmandu]

Buy it katmandu if 6800 is such a great deal.If I had an extra $6800 it would be in my garage right now. :rolleyes:

[mustangjon]

car is a sweet ride, drove it a time or two a while back :) two creatures in one.. before and after wastegate lol!:lol:

[Brian-Mc]

Ok... surprising to me... the bottom of the doors are in decent shape. The passenger did not have any rust from what I could see... granted it was still up close to the wall on that side. The drivers had maybe a spot between 8 and 10 inches long where the seam sealer had cracked and began to fall off... I am no body person, but I think this would clean up just fine. The drivers door has some body filler that has cracked over the years. I had wrecked it back in 99 but had it fixed back but the body shop did an "ok" job doing the work.. (before I was knowledgeable of good body people.) Interior... I have a few pics... the drivers seat has expected tears. I do have two black 95 V6 seats with power rails to go in the car. The rear seat has a stain where my cooler leaked over a year ago. Dash has boost and Electric fuel pressure gauge. PLX wideband gauge is located where the dash dimmer switch was... the dimmer went bad so I just jumpered the dash lights and let it go. The "dome" light was in the mirror and it has its own switches... The door panels have the old Q-form boxes on them. I never got around to changing them.

Mileage on the car was 212435. The engine maybe has 12 to 15K on it. It has parked more in the past few years than it ever had...

I do have someone coming up this weekend to look at it.

I will also be out of town starting Sunday morning and will not be back until next Sunday night. My wife and I are going to New Orleans with our church for a mission trip. However, the car is possible to be looked at while I am gone. Maybe not test driven but atleast looked at. If anyone is interested in checking the car out while I am gone, please contact "Jacob" (Jacob Lamb) or "thrillrr" (Rob Hartness). Both are members on this site. As well as many others...

[Brian-Mc]

More Pics of the interior

[Brian-Mc]

Pics of the bottom of the doors

[Brian-Mc]

Back from a week in New Orleans. TTT

[Brian-Mc]

TTT - Make me an offer.

[Brian-Mc]

TTT... $6600

[dbdragracing]

Thats a great looking car...wish I had room in the stable for it. Are those factory Ford 17x8 Bullitts? The reason I ask is, I just purchsed a set for my 1989 GT but haven't gotten them on yet. Just curious what they will look like. TTT.

[Brian-Mc]

Yes.. factory 17x8. Thanks for the bump.. make me an offer if you want.. lol

[Brian-Mc]

TTT...I would like to see this thing gone this week. If you have any interest, make me an offer via PM.... no reasonable offers will be turned away. Lot of good parts in this car at this price...

Brian

[Brian-Mc]

Car is Sold