1991mustang
04-06-2008, 11:42 PM
I have a Nitros cam for sale.. It is a Crane cams cam, custom grind, for a
351W, and a 82 and up 302 H.O.. Was never run in motor.. Being that it was a custom grind I was unable to return it.. "Ohio George" Montgomery placed it in motor and found out that the duration needed to be changed so I wouldnt have to change pistons, just fly cut them.. I have pics of cam and cam card if interested just ask.. 937-287-8902 Paid 300.00 asking 175.00 OBO
Valve setting: Intake .020 Exaust:.020
Lift: @CAM 420 @CAM 420
Lift: @VALVE 672 @VALVE 672
Rocker arm Ratio 1.60
opens closes Advertised Duration
Cam timming@ .0205 Intake 37.0 BTDC 77.0ABDC 294.0
Tappet Lift Exaust 85.0BBDC 37.0ATDC 302.0
Spring Requirements
Part number99882
RPM range Minimum 4100
Maximum 8100
Valve float 8700
Cam timing@.050
opens Closes MAX LIFT Duration
Intake 22.0BTDC 60.0ABDC 108ATDC 262.0
Exhaust 70.0BBDC 20.0ATDC 116BTDC 270.0
351W, and a 82 and up 302 H.O.. Was never run in motor.. Being that it was a custom grind I was unable to return it.. "Ohio George" Montgomery placed it in motor and found out that the duration needed to be changed so I wouldnt have to change pistons, just fly cut them.. I have pics of cam and cam card if interested just ask.. 937-287-8902 Paid 300.00 asking 175.00 OBO
Valve setting: Intake .020 Exaust:.020
Lift: @CAM 420 @CAM 420
Lift: @VALVE 672 @VALVE 672
Rocker arm Ratio 1.60
opens closes Advertised Duration
Cam timming@ .0205 Intake 37.0 BTDC 77.0ABDC 294.0
Tappet Lift Exaust 85.0BBDC 37.0ATDC 302.0
Spring Requirements
Part number99882
RPM range Minimum 4100
Maximum 8100
Valve float 8700
Cam timing@.050
opens Closes MAX LIFT Duration
Intake 22.0BTDC 60.0ABDC 108ATDC 262.0
Exhaust 70.0BBDC 20.0ATDC 116BTDC 270.0