AC delete kit

[Steves LX]

I have an AC delete kit from Ford Racing that I can not figure out how to install. I need to do something because right now with just the triangular piece just mounted to the head without the black bracket hooked up it has my PS pump all wanked to one side and its been tearing up my belt slowly but surely. If anyone has a picture of theres on there car that would be really helpful. The instruction sheet on line isn't worth a crap. Any help would be appreciated.

[fst 5pto]

Are you missing any spacers or possibly a washer? What exactly is causing the ps pump to be crooked?

[black90lx]

I have the same piece as you on my head but I also have a black metal traingle piece that goes from the water pump to the power steering pump. I belive it is the same piece the the a\c compressor mounted to also.

[zlou363lx]

http://i7.photobucket.com/albums/y252/startthesho/gus%20project/Picture062.jpg

will this help? mine's carb'd, but it should give you an idea.

[85_SS_302_Coupe]

http://i229.photobucket.com/albums/ee275/EVIL85SSP/Mustang%20Pics%20and%20Videos/Im0018383.jpg


Look at the thick part at the top of the aluminum piece that's against the head...use that as a reference on how to position it. The yellow lines represent the bolts going into the head. Once you get the aluminum piece on right, the black piece only goes on one way.

[black90lx]

http://i229.photobucket.com/albums/ee275/EVIL85SSP/Mustang%20Pics%20and%20Videos/Im0018383.jpg


Look at the thick part at the top of the aluminum piece that's against the head...use that as a reference on how to position it. The yellow lines represent the bolts going into the head. Once you get the aluminum piece on right, the black piece only goes on one way.

You are probably missing that black metal bracket circled in the picture, that's why it is cocking at an angle.

[Steves LX]

No I have the black bracket just was not sure how it goes on. I kinda have an idea now but the only problem is I have a March performance alternator bracket set up. The turn buckle that tensions the belt down is actually connected where to the water pump where that black bracket for the AC delete kit goes.

[black90lx]

i had the same thing and it worked out fine

[zlou363lx]

get a longer bolt and try putting it on the front side of the black bracket. that shouldn't mess up the angle since the black bracket isn't really too thick

[IEATLT1]

goto ford racing they have a pdf for the install

[Markcore]

Not sure if this helps, but heres a picture of mine...
http://i34.photobucket.com/albums/d130/HEPFER/mustangengine.jpg