Turn signals not working

[50dan]

on my '89...They don't work at all. I checked te fuse, its OK. Everything else works. Is it the switch??? :confused:

[PaulFiveOh]

Did you check your blinker fluid?

Can you hear the relay clicking?

[Jeff88coupe]

You check the flasher unit...it's the round metal piece that plugs into your fuse box panel. They can go bad.

[08 Vette]

You check the flasher unit...it's the round metal piece that plugs into your fuse box panel. They can go bad.


That's what I'd say it is!
It can be plastic or aluminum.

[Jeff88coupe]

Do your hazard lights work when you flip the switch? If they do it's not the turn signal switch in the stick.

[dedpedal]

Heres an odd idea. Check the harness on the colum. When I dropped mine to change the pedal assembly out, I pulled a wire out of the connector that feeds power to the switch. I think it was an orange wire.

[50dan]

I hear no clicking, not sure what blinker fluid is.


I think the flasher is OK cause the flashers work fine.

Thanks for the input so far!!!

[PaulFiveOh]

not sure what blinker fluid is.




Yea me neither?? :confused::confused:

[mustangrfast88]

it sounds like a switch issue i got the same issue and i found the switch to be the problem and does anybody know if the airbag cars and non air bag cars are the same somebody stoled the one out of my parts car what freinds i got let me tell you oh well parts car is gone now anyways

[Ryan218]

do your hazards work you turn them on? if not pop the switch out and mark sure its plugged in. If its not your turn signals will not work either. it completes the circuit or something.

[ATimpe]

Your car should have two flashers. The one in the fuse block is for the hazards only. The turn siganl flasher is behind the glove box, same style as the hazard, just switch them and see if they work.:bigthumb