bangingears
01-21-2008, 11:44 PM
just kind of seeing if anyone is interested, all heads and in good shape and have been vacuum checked. One is already spoken for but are not chosey.
*** will trade plus cash for, Kuntz 210cc cnc twisted wedges, TEA's 205cc wedges, afr205, cnc hi-port, or victor jr.**
- 1 set of 3 month old twisted wedges, out of the box and have about 2-3000 miles. perfect shape $1000
-1 set of twisted wedges, out of BES this spring, milled .002'' valve job, PC teflon valve seals, AFM hi-rev springs, ran on my car this summer, approx. 3-5000 miles $1100
-1 set of twisted wedges, freshened up sometime last year, have AFM hi-rev valve springs with hardly no time. this are ibstrokin's old heads and can vouch for condition. I don't know to much about these but are in good shape. $1100
-1 set of twisted wedges, perfect shape, stock out of the box with the exception of AFM hi-rev springs. These are 9-10 months old and came off a 302 N/A engine. $1100
-2 sets of comp magnum roller rockers, 7/16'' stud 1.6 ratio $200 a set
-1 set of FMS 3/8'' stud 1.7 ratio rockers $150
-1 set of harland sharp 7/16'' 1.6 ratio rockers, set to sharp this spring to get new bearings and CNC to accept a 1.550'' spring $200
-1 set of 3/8'' 1.6'' ratio stud rockers, look to be chinese or something? $75
-3 set of FMS 6.250'' hardend pushrods $30 a set
-1 set of manton oil restricted 6.250 .080'' wall $75
-3 sets of 6.7'' .080' wall hardened $50 a set
-1 set 6.750'' .080'' wall $50
- 1 set of 6.600'' .080 wall $50
*** also have many other sizes in pusrods and some 3/8 stuff too***
*** will trade plus cash for, Kuntz 210cc cnc twisted wedges, TEA's 205cc wedges, afr205, cnc hi-port, or victor jr.**
- 1 set of 3 month old twisted wedges, out of the box and have about 2-3000 miles. perfect shape $1000
-1 set of twisted wedges, out of BES this spring, milled .002'' valve job, PC teflon valve seals, AFM hi-rev springs, ran on my car this summer, approx. 3-5000 miles $1100
-1 set of twisted wedges, freshened up sometime last year, have AFM hi-rev valve springs with hardly no time. this are ibstrokin's old heads and can vouch for condition. I don't know to much about these but are in good shape. $1100
-1 set of twisted wedges, perfect shape, stock out of the box with the exception of AFM hi-rev springs. These are 9-10 months old and came off a 302 N/A engine. $1100
-2 sets of comp magnum roller rockers, 7/16'' stud 1.6 ratio $200 a set
-1 set of FMS 3/8'' stud 1.7 ratio rockers $150
-1 set of harland sharp 7/16'' 1.6 ratio rockers, set to sharp this spring to get new bearings and CNC to accept a 1.550'' spring $200
-1 set of 3/8'' 1.6'' ratio stud rockers, look to be chinese or something? $75
-3 set of FMS 6.250'' hardend pushrods $30 a set
-1 set of manton oil restricted 6.250 .080'' wall $75
-3 sets of 6.7'' .080' wall hardened $50 a set
-1 set 6.750'' .080'' wall $50
- 1 set of 6.600'' .080 wall $50
*** also have many other sizes in pusrods and some 3/8 stuff too***