94-95 Spindles

[fordfan]

I`m looking for a pair of spindles to do a 5-lug swap.

[bascom123]

email this guy (wolverine8490), he has a set i saw them today.. i think he has them on ebay right now..

Good luck with it..

:bigthumb

[wolverine8490]

Yep, they are on ebay right now. PM me if you are interested.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=230209777131&ssPageName=STRK:MESE:IT&ih=013

[IEATLT1]

I have a set of 94/95 spindles, hubs (good bearings) calipers, lines, no dust shields and if you meet me in peebles I'll throw in a set of turnable rotors....

180 shipped without rotors...

160 and meet me.....

[5.0calypso93lx]

Yep, they are on ebay right now. PM me if you are interested.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=230209777131&ssPageName=STRK:MESE:IT&ih=013

Those are 96-98's, not the same as 94-95's.

[wolverine8490]

Interesting. What makes them different? Autozone shows the same part number for the 96 as it does for the 94.

[5.0calypso93lx]

Interesting. What makes them different? Autozone shows the same part number for the 96 as it does for the 94.

The 96-98 spindles move the wheels out an additional 8mm compared to the 94/95's. It was thought that the 94-95 spindles kept the stock track width, but that's a myth. They do widen the track width also, but it is a very small amount. Most guys with foxes running 9" wheels in the front need the lesser track width of the 94-95's.

I'll have to dig around on corral, but there is a thread with a set of 94/95's and 96-98's next to each other, and they measure the mounting face of the hub on each set, and the 96-98's are 8mm wider, per side.

The 99-04's push the wheels out even further than the 96-98's I believe. Never really looked into that, but I do always see them classified seperately than 96-98's.

[wolverine8490]

Cool, thanks for the info. I never would have known that.

[5.0calypso93lx]

Cool, thanks for the info. I never would have known that.

:bigthumb

I don't mean to steal a sale away, but just wanted to make sure Kenny knew there was a difference.

[wolverine8490]

Totally agree. I dont want to sell anything that wil not work 100%.

[IEATLT1]

http://mjbobbitt.home.comcast.net/~mjbobbitt/mustang/5lug.html

check that out it pretty much sums it up

I believe mine are sold but I can get my hands on another set...

[5.0calypso93lx]

http://mjbobbitt.home.comcast.net/~mjbobbitt/mustang/5lug.html

check that out it pretty much sums it up

I believe mine are sold but I can get my hands on another set...

Yea, that is a good site to go by. The only problem is, is that he states that the 94-95 spindles retain the stock track width, which is not true, even if it is widened by just a little bit.

[fordfan]

Yeah I need the 94-95`s IEATLT1 check your pm

[IEATLT1]

pm replied

[fordfan]

Thanks IEATLT1 :bigthumb

[IEATLT1]

no problem... thanks again let me know if your looking for anything else