88GT burned under hood need help

[JamesjGT]

I have an 88GT that burned under the hood and cooked all the wires. It is still very nice from the firewall back. I wanna put a something else in it but I need someone to rewire it and get it ready for a new engine. Can anyone help me out for a good price.

[PaulFiveOh]

I wonder if it would be cheaper (or at least more cost effective) to just buy a new Painless harness

[IEATLT1]

why a painless if you can pull one from a junk donor car?

[tim c]

why a painless if you can pull one from a junk donor car?

:agree:

[JamesjGT]

Does a Painless go into both sides of the firewall? Both wire harnesses going into the drivers and passengers sides burned up. Does the Painless go to the computer and the ignition? I would love to find a donor to take off all the little parts I need. I need all new cables, front fender, wires, etc. However, I have been having trouble finding a donor car. I have been to the junk yards and they are all already stripped, or they are 4 cylinders.

[quik lx]

Exactly what wiring is burned up? I have a spare headlight harness, and a spare alternator harness. It's easy to run new wires for the gauge senders, A/C compressor, and such. I also have a couple incomplete fuel injection harnesses for parts. Got any pic's. Painless, The Detail Zone and a few other company's make the fuel injection harness (around 400bux) but not the rest.

[JamesjGT]

I was going to buy a new engine (Turnkey) with some power! Everything under the hood is burned or melted. I have a fuel injector wire harness but thats it for now. I was thinking about putting a 347 carb turnkey in it since that might help with cost and pain.

[347sc]

I have a complete ECM, harness,andinjector harness.

[JamesjGT]

If the painless would take care of everything I would like to go with that if I could get someone to install it all for me. I don't know much about what all I need but I would love to find some help. I'm in the Reading area. Once X-mas is over I can start to put money in the car and do it right. I don't plan on ever selling the car so I want to do it all right and with the best.

[JamesjGT]

Would anyone be able to do all of the work for me?

[Ryan218]

my buddy has all the wiring from a 92 GT with the ecu.

[JamesjGT]

how much for all of it

[JamesjGT]

How do I put pic's of my Mustang up on here?

[JamesjGT]

http://http://img244.imageshack.us/img244/8167/mustang006yd9.jpg

[JamesjGT]

here are some pics
http://http://img80.imageshack.us/my.php?image=mustang009jo0.jpg

[JamesjGT]

http://http://img80.imageshack.us/my.php?image=mustang019at3.jpg

[JamesjGT]

Can anyone help me rebuild this mustang GT

[JamesjGT]

http://<a href="http://img80.imageshack.us/my.php?image=mustang019gb5.jpg" target="_blank"><img src="http://img80.imageshack.us/img80/8591/mustang019gb5.th.jpg" border="0"/></a>

[JamesjGT]

<a href="http://img80.imageshack.us/my.php?image=mustang019gb5.jpg" target="_blank"><img src="http://img80.imageshack.us/img80/8591/mustang019gb5.th.jpg" border="0"/></a>
<a href="http://img80.imageshack.us/my.php?image=mustang018rd3.jpg" target="_blank"><img src="http://img80.imageshack.us/img80/6440/mustang018rd3.th.jpg" border="0"/></a>
<a href="http://img80.imageshack.us/my.php?image=mustang009we8.jpg" target="_blank"><img src="http://img80.imageshack.us/img80/5333/mustang009we8.th.jpg" border="0"/></a>
<a href="http://img80.imageshack.us/my.php?image=mustang006jk9.jpg" target="_blank"><img src="http://img80.imageshack.us/img80/3531/mustang006jk9.th.jpg" border="0"/></a>

[ibstrokin]

links no worky

[JamesjGT]

anyone wanna see the pics that can help just pm me your email and I will send a few pics.

[quik lx]

Send me some pic's to joemaggy5o@yahoo.com. There's plenty of room down at the speed shop and thanks to Craig's stripped coupe we now have another wiring harness!! Gimme a call 519-7686 Joe

[JamesjGT]

pics sent let me know what you think.

[JamesjGT]

Need someone to rebuilt a 88 burned under the hood

[Maximus]

Need someone to rebuilt a 88 burned under the hood

I hope you find someone.:bigthumb

[JamesjGT]

Income tax time is here and I will pay someone to pull the engine and get this stang back on the road for my wife. I don't have the time or place to rebuild it. welcome to come look at it and see if you can help

[JamesjGT]

Can anyone tell me how to put my pics up on here. I really want to get this car back on the road for my wife. This was her dream car and a Optima battery started the fire. I cleaned most of it up but it needs the engine pulled and rewired. I will pay for someone to get it back up.
I can't get my pics up but if anyone wants to see you can pm me your email or come by and look. I'm in the Cincy area (Reading).

[JamesjGT]

http://s260.photobucket.com/albums/ii31/Jamesjgt/

[347sc]

If I had a place to do it I'd be all over it.

[JamesjGT]

I have a small garage here that it stays in but its really too small, but its backed into the garage.

[347sc]

Where you located?

[JamesjGT]

Reading/Lockland, Ohio area.

[Ryan218]

some girl on stangnet i belive use to own that car and had a battery cause the fire? is that your or did you buy that car from her!!!

[JamesjGT]

No we bought this mustang from a guy in Indy and had it for 3days and it burned in our garage. This was my wifes dream car and I would really like to get it back on the road for her.
We have new parts for the engine like a Typhoone upper and lower, Injectors, 70mm body and spacer, rails. I was going to buy s set of head while we are at it.

[Maximus]

Reading/Lockland, Ohio area.

Thats down the street from the shop Bo.:)

[JamesjGT]

Yeah it's 3min away from me. If you know anyone that can do the work or help me out send them my way. I just bought a notch and was going to come to your shop and get a set of heads for it.

[mustang8998]

Did you find all the wiring, etc.....?

[JamesjGT]

No not yet, Depends on who does the wiring. If they wanna do painless or a used one. I need someone else to take the car and do what they can.

If anyone can rebuild this for my wife I will pay well.

[347sc]

I have or can get everything. Let me see what my week looks like.

[JamesjGT]

Do you know of anyone that can do it all for me? My wife is getting to the point to sell it because we can't get this thing fixed or find the right person.

If anyone has a shop and interested in taking on this project let me know what it would cost...????

[Ryan218]

No not yet, Depends on who does the wiring. If they wanna do painless or a used one. I need someone else to take the car and do what they can.

If anyone can rebuild this for my wife I will pay well.


im pretty sure same person, i know she was all excited about the car and then...bam the battery started a fire.:(

a buddy of mine has a engine harness from a 92 GT...i know he cut a few things ill have to check and see what it was and ill get back to you a sap!

[JamesjGT]

Does anyone wanna take on this job? My wife has decided to sell this car if we can't get it fixed.
It needs all new wire under the hood, the top of the engine redone but I have all the parts for that already.
If anyone can fix all of this let me know here or PM me.

http://s260.photobucket.com/albums/ii31/Jamesjgt/

[IEATLT1]

if you were closer I'd tackle this for ya.... good luck I know you been trying for awhile

[8NO4CYL]

Sent you a PM.

[mrstang-gt-46]

also sent you a pm

[JamesjGT]

Thanks everyone for all your help. The car is finally getting worked on.