Fix for leaky 8.8 c-clip eliminators

[Jeff88coupe]

If you run Moser C-clip eliminators (will not work with strange C-clip eliminators) on 28 or 31 spline axles you can use a axle seal to keep them from leaking. It is Napa part #13988...about $12 a piece. I just installed them in my rearend housing tonight....look like they are gonna work great...fit like they were made for a 8.8 axle tube. I found this tip while searching around on the corral forums....few other guys that have tried it said it works for them also. Figured I'd pass it along.

[bobtsgt]

thanks for the info Jeff. its the little things that can save you a bunch of time.

[windsor86]

might starve the bearings of there fluid. could burn em up

[Gearhead559]

might starve the bearings of there fluid. could burn em up

cant starve a sealed bearing....thats what the eliminators are for..they remove the open lubed cup style bearing with a sealed bearing pressed on the axle.:lol: