Parse error: syntax error, unexpected '<' in /opt/bitnami/apache2/htdocs/forums/archive/global.php(117) : eval()'d code on line 1
NEED HELP!!!!! [Archive] - StangBangerz Forums
PDA

View Full Version : NEED HELP!!!!!


Pitviper1996
10-01-2007, 10:06 PM
Ok i just put an Edelbrock victor intake on my 94gt. I eliminated the egr as well. Well since the install it smokes through the oil dipstick and valve covers like theyres to much crank case pressure or something.... The Edelbrock intake also didnt have a pvc valve location on it or ne thig which i beleive may be part of the problem

How do i fix this or whats causing it? my car runs rich but i dont think that would be it
ibstrokin
10-01-2007, 11:01 PM
You need to put breathers in the valve covers, quickly.
Pitviper1996
10-01-2007, 11:11 PM
well im not driving it so i have time to do that. Would that fix it?? and whats causing that so i know.
ibstrokin
10-01-2007, 11:18 PM
Your crankcase pressure has now way out of the engine, except past the rings
Silver Bullet
10-01-2007, 11:32 PM
My motor was spewing oil everywhere......... no vents in the sheetmetal valve covers.... put some in problem solved......
Jeff88coupe
10-01-2007, 11:48 PM
Yep...no pvc ='s no crankcase vent...put breathers on both valve covers. What is your whole combo?
Pitviper1996
10-02-2007, 12:54 AM
306 ported e 7's with a tfs 1 cam. edel brock vicor upper and lower intake and 24lb injectors.

i have only one spot to put a breather so hopefully it would be enough. now with it blowing out of the valve covers its not going to mess up anything is it.