35mm and 50mm vortech cog pulleys f/s

[ibstrokin]

I have 2 sets of vortech cog pulleys, one is 35 mm, the other is 50mm. The 35mm setup is 73/30, I forget what the 50mm setup is but will check for sure tomorrow. Both sets come with 1 belt each. $150 per set or both for$275.

[Silver Bullet]

I might be interested in these.... right now I have a 8" crank and a 3" blower pulley and need to slow the blower down... I will have to see what cogs I need and how the relate to the size of what I have....

[ibstrokin]

This is a swinging deal, check vortech's website for impeller speed info.

[Silver Bullet]

They only calculate impeller speed by inch.... per pulley?:confused:

[ibstrokin]

No, if you type in the count of the cogs and shift rpm it will give you impeller rpm. 73/30 @ 6000 rpm = 50370 impeller speed.

[Silver Bullet]

It Looks like the one you listed will work. What is the other one...?

[ibstrokin]

New price $125 per set, dirt cheap. BTW both sets are 73/30. The 50 mm set is a different offset.

[ibstrokin]

Shoot me a reasonable offer

[ibstrokin]

Bump Bump