The vert goes under the knife

[ibstrokin]

Well I drove the car to Victory Fabrication monday, we got started swapping out the S-trim for the drivers side ysi. I'm also adding a front mount intercooler and going blow through meter. The car should be back on the street by thurs, then I'm going to do a valve spring swap and get it back to Jeff @ Precision Autosports to make sure the tune is safe. The ysi will be slowed down, but it should still make alot more power than the S(which is still for sale by the way).

I'll try to post some pics once it's installed.

[91lxnos]

Can't wait to see "Spiderman" back in action!!!! Just in time to own the streets of Bowling Green and their women!!!!!!!!!!

[cstreu1026]

what block are you using in that thing?

[ibstrokin]

It's a mexican block. It's made 637 rwhp on race gas and cogs (5 speed). My goal for this year is to make enough power to dip in the 9's, on pump gas and 8 rib belt. Next year I plan on having a boss block, then step up the power.

We hit a small snag today with blower clearance and an accesory bolt. Tomorrow the bracket will get milled about .150" and that should take care the clearance issue.

So now were probably looking @ Friday. Once we can actually mount the blower we'll get started on the tubing. The intercooler is already mounted(with help from 93hulk), and bolt issues have been mostly sorted out.

Ray @ Victory Fab (victoryfab.com) has been a huge help in getting this sorted out. This would take me forever to get mounted if it was at my house. He's been involved with efi renegade for years, so he is very well versed @ custom blower mounting. He has been the crew cheif for Bob Kurgan on numerous occasions.

My brother has been a big help also, he has a cnc mill @ his house,Greyhound precision.com. He modified a vortech spacer for me so that I can still use my comp eng. engine strut. He now has some very nice software for his mill that does awesome custom engraving in aluminum. He's tz250 on here, feel free to pm him with questions about custom parts or engraving.

[Ryan218]

It's a mexican block. It's made 637 rwhp on race gas and cogs (5 speed). My goal for this year is to make enough power to dip in the 9's, on pump gas and 8 rib belt. Next year I plan on having a boss block, then step up the power.

We hit a small snag today with blower clearance and an accesory bolt. Tomorrow the bracket will get milled about .150" and that should take care the clearance issue.

So now were probably looking @ Friday. Once we can actually mount the blower we'll get started on the tubing. The intercooler is already mounted(with help from 93hulk), and bolt issues have been mostly sorted out.

Ray @ Victory Fab (victoryfab.com) has been a huge help in getting this sorted out. This would take me forever to get mounted if it was at my house. He's been involved with efi renegade for years, so he is very well versed @ custom blower mounting. He has been the crew cheif for Bob Kurgan on numerous occasions.

My brother has been a big help also, he has a cnc mill @ his house,Greyhound precision.com. He modified a vortech spacer for me so that I can still use my comp eng. engine strut. He now has some very nice software for his mill that does awesome custom engraving in aluminum. He's tz250 on here, feel free to pm him with questions about custom parts or engraving.


i love your vert....got any bigger pics?

[93hulk]

Yeah post some pics.:D

[Maximus]

YEAH!!! :wstupid:

[MrsAPE]

Patience young grasshoppers...he said he would.
Fast verts rock!
Someday I may have one.

[ibstrokin]

We got the blower mounted where and how we want it, the tubing is all cut, tranny cooler is relocated. Ray will post pics soon.

[ibstrokin]

Here are a few pics


http://i172.photobucket.com/albums/w23/Ibstrokin/willowJenny010.jpg?t=1190605859

http://i172.photobucket.com/albums/w23/Ibstrokin/willowJenny009.jpg?t=1190605904

http://i172.photobucket.com/albums/w23/Ibstrokin/willowJenny016.jpg?t=1190606028

http://i172.photobucket.com/albums/w23/Ibstrokin/willowJenny018.jpg?t=1190606096


Here is one of Ray making his headers for the new turbo.
http://i172.photobucket.com/albums/w23/Ibstrokin/willowJenny019.jpg?t=1190606145

[91lxnos]

Damn I can't wait to see the match up!!!!!! So is it going to BG or not????

[ibstrokin]

Hopefully, I want to swap the valvesprings, and get it back to the dyno, and then (if it's still running) off to BG

[ibstrokin]

Oh yeah, you would think this thing is a construction worker, because of the way it whistles.

[Silver Bullet]

Looks good... should be fast! Why not use your cog setup on this?

[ibstrokin]

$120 a belt, Renegade cars run 8.50's on a 8 rib belt. So if I can get the car to run low 9's next yr on a 8 rib I'll be happy.

[Silver Bullet]

Wow! I only thought they was $50 a belt..... Since your post I have also been checking up on them.... it sounds like they are Hard on everything.

[kennebellcobra]

Lookin good...hope to see it in BG

[Blowpastyou]

Seen it today in person. SWEET!!

[VictoryFab]

Ive also got some in process pics of brians set-up that ill put up in the next couple days.

[chad393na]

I got to see it the other day, looks awesome!!! I think I may have to step up the jetting a little:D

[91lxnos]

LOVE THE NOISE IT MAKES>>>>>>>>>I WANT ONE!!!!!!!!!!!!!!!!!!!!!!!!!!!

[VictoryFab]

LOVE THE NOISE IT MAKES>>>>>>>>>I WANT ONE!!!!!!!!!!!!!!!!!!!!!!!!!!!

I think the noise of the wastgate is going to be better!!

[ibstrokin]

Hopefully I'll get the new valvesprings on tonight.

[91lxnos]

:bigthumb
Hopefully I'll get the new valvesprings on tonight.

Quit drinkin and start wrenchin!!!!!!!!!!!!!!!!!!!!!!!!! or do both!!!!!!!!!!!!!!

[chad393na]

Hopefully I'll get the new valvesprings on tonight.

Yea right! lol

[ibstrokin]

The new valve springs are in ( the old springs were shot). Chad393na is taking it to Precision Autosports to have Jeff update the tune. I'll keep you posted.

[ibstrokin]

Well it went to the dyno. The converter flashed @4300 and the meter pegged @ 4500. I picked up a Mafia maf extender. So it's going back to Precision in the morning to get finished. I'll keep you posted.

[91lxnos]

sweet!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[ibstrokin]

Well I have good / bad news. Good news is, it picked up 100 hp on the ysi. Bad news, it pegged the inj.'s @ 5800 rpm. I'll still take it back to the track, but shifting off the rev limiter @ 5600 is gonna suck. So that's it for this year, I'm not going to swap inj.'s this year, but def. next. Hopefully it will still run well into the 10's short shifting.

[VictoryFab]

brian, call me today. i saw a guy that had high imp. inj. for sale.

[ibstrokin]

brian, call me today. i saw a guy that had high imp. inj. for sale.

Aren't you supposed to be posting some in process pics- slacker

[VictoryFab]

I know, I know.... Your just mad because you cant make it to 660' under full power. Its really not my fault, dont take it out on me.. Later, slacker....

[ibstrokin]

I guess I can update this thread.

I have taken the engine out, disassembled it and taken the rotating assembly to Georges speed shop in Dayton, they are in the process of building the boss block. I got a set of ported tw's from banging gears (severely ported), they have been dropped off at Heads up cyl. heads to be checked,flowed and assembled, the heads came with a matching holley lower (severely ported). I also picked up a set of 83# inj.'s from Ray @ victory fab, and his epec computer. In the next couple of weeks I'll be picking up his Kooks 1-7/8 to 2" step headers, x-pipe, and 3.5" bullets.

I still need to purchase a cam, and I think I'm going to run 2 a1000 fuel pumps. I'm going to have my stock gas tank sumped (quick rev in Dayton).

Then the car will go back to Jeff @ Precision to get tuned. Hopefully I will have everything back together by spring.

I'll post pics of parts and progress

[ibstrokin]

http://i172.photobucket.com/albums/w23/Ibstrokin/numerouspics006.jpg

[ibstrokin]

I thought I would do a little update. I haven't done shinola to the car, but, I have alot of new parts. I picked up my engine from Georges Speed Shop, 331 Boss block. I should pick up the heads next week. I acquired a lentech aod, which should help to keep the car steetable. I picked up a set of Kooks 1-7/8 to 2" step headers w/ bullet's.

I still need to work something out with a fuel pump, cam and pushrods.

I'll post some pics of progress in the next couple of weeks.

[Kwik92GT]

I acquired a lentech aod, which should help to keep the car steetable. I picked up a set of Kooks 1-7/8 to 2" step headers w/ bullet's.
LOL ..... You better invest in some ear plugs. :lol:

[Silver Bullet]

I have 2 /18 inch Kooks headers... X pipe then the bullets.... yes it is loud.. debating on driving it on the street with those.:lol:

[93hulk]

POST PICS OF THE HEADS!!!!!!!!:D

[BADGOAT455]

you gonna get a Canadian to drive it?.......:cool1: hee, hee

[ibstrokin]

I got my cam in the mail today. I ordered it from Bullet cams, and they are great to deal with. They built me a one off grind, specific to my needs, and it arrived 6 days after I ordered it. It cost $309 to the door. You can't beat their service, price value. If this cam works like I think it will, these guys will do all my cams in the future.

[Maximus]

Kick ass!! Whens the debut??

[ibstrokin]

UPDATE- I cut the 6 point mild steel cage out of it last night. This morning I ground out the stubs to the plates, big pain in the ass, pulled the gas tank, pulled the interior and dash out of it, and delivered it to Precision Autosports to have the new 10 point moly cage installed. Ray Mcintire(formerly of victory fab) is now working @ Precision. I hope to have some pics by next week.

I'm not sure if it will make it to the track this year, If it does, it will be later in the season.

[ibstrokin]

Here are a few pics of the cage Install


http://i172.photobucket.com/albums/w23/Ibstrokin/Untitled1.jpg


http://i172.photobucket.com/albums/w23/Ibstrokin/Untitled3.jpg


http://i172.photobucket.com/albums/w23/Ibstrokin/Untitled4.jpg


http://i172.photobucket.com/albums/w23/Ibstrokin/Untitled5.jpg


http://i172.photobucket.com/albums/w23/Ibstrokin/Untitled6.jpg


http://i172.photobucket.com/albums/w23/Ibstrokin/Untitled7.jpg


http://i172.photobucket.com/albums/w23/Ibstrokin/Untitled2.jpg

[ibstrokin]

I like the way the rear of the cage fits the car. The bottom of the rear seat fits perfect, the back will need to be trimmed a little. But the cage I had before didn't tie into the rear frame, this one does. The cage is fit so that the top still works, and is actually easy to use. Ray put in through the floor subframes, and tied them into the main hoop, and frame rails. The cage is made out of chromemoly, so it should only be a little heavier than the previous cage. But I took out the heater box and a few other item, So I think the car will actually be a little lighter than before. I have a complete black interior that I'll be putting back in it, so hopefully I'll have some more pics in the coming weeks.

Big thanks to Ray (Goes by victoryfab on here) for doing such a good and fast job.

[Qtr milerocket]

That looks great Brian I can't wait to see your car tear up the strip again man!




Peace :cool2:





James

[k062693w]

Gotta Love a BADA$$ VERT !!!!!!! Looking Good Brian !!

[chad393na]

Looks awesome Brian!! I really miss busting your ass, it may be a little harder now:lol:

[93hulk]

:bigthumbNICE!

[PonymanfiveO]

too cool! I love it!

[VictoryFab]

no prob brian, thats what im here for..

[kennebellcobra]

Lookin good :bigthumb

[Blowpastyou]

now get that wiring cleaned up and put that thing back together.

[ibstrokin]

Thanks guys, We ordered a stroud window net, once that comes in and gets welded on, I'll be bringing it home and putting it back together. I'm going to need help from a few of you guys, you know who you are.

[Rick93coupe]

I'm all booked. ;)

[k062693w]

What weekend was that??? Yep I'm busy that weekend ... Sorry LOL

[flyin_hawaiin]

i wish ray knew how to weld LOL

[ibstrokin]

i wish ray knew how to weld LOL

If This is who I think it is, Ray's welds have already saved your ass once:bigthumb

[VictoryFab]

i wish ray knew how to weld LOL

actually brian, you may not see it right there on the surface, BUT, it sort'a is a compliment..

for "THE" big flyin hawaiin to subscribe to this board and reply to this post we should all feel blessed.:lol:

thanks bob....

[ibstrokin]

I got the joke, which is why I used a smiley with a big thumb. I was just shedding light on Bob's position of Quality control/product testing:bigthumb

[replicobra]

hey brian. can we take that thing rock crawlin too?

[poncho2001]

Thanks guys, We ordered a stroud window net, once that comes in and gets welded on, I'll be bringing it home and putting it back together. I'm going to need help from a few of you guys, you know who you are.

Got BEER. :D

[79hatch5.0]

man that is a bad car...its gonna fly...

[ibstrokin]

Thanks guys, and yes Brad, there's always beer

[poncho2001]

Thanks guys, and yes Brad, there's always beer

OK count me in

[kennytent]

I hope I'm not one of those that needs to lend a hand. lol... Let me know when your working, and I'll see what I can do.

[NXcoupe]

Brian, the car is lookin sweet. Ray is a mad scientist when it comes to cage and fabrication! Can't wait to see it at the track!

[ibstrokin]

Thanks Mike, I still have a shitload of work to do before it sees the track. I think I'll fix the fender before it comes back out, so next year is the most likely.

[Kwik92GT]

Ray did an awesome job on the cage. Hope you can find a way to get it out this year.

[ibstrokin]

Hopefully I can start working on this again soon. I'll try to post pics this evening.

[JASON408]

DAM IS THAT THING DONE YET !!!!!! J/K Hope to see that thing rocking out soon it been to long !!

[ibstrokin]

Well, I picked up a Vortech Igloo from the swap today. Hopefully that should allow me to make a few more horsepower.

[Silver Bullet]

Well, I picked up a Vortech Igloo from the swap today. Hopefully that should allow me to make a few more horsepower.

I'm waiting on the cage pics!!:bigthumb

[NXcoupe]

Well, I picked up a Vortech Igloo from the swap today. Hopefully that should allow me to make a few more horsepower.

Was that the one in the Voinivich building? It didn't have the intercooler in it did it? I saw that and knew it would make someone a cool upgrade.

[93hulk]

Well, I picked up a Vortech Igloo from the swap today.

DICK!!! :flipoff:

[ibstrokin]

Was that the one in the Voinivich building? It didn't have the intercooler in it did it? I saw that and knew it would make someone a cool upgrade.

No, it was outside on a trailer. It has a carb lower,core,upper, and water logs. I should have a holley lower on it,s way tonight. The core needs repaired, but I've already got Ray on it.

[NXcoupe]

Cool! That's wild there were two of those things at the swap meet. They aren't too common, but they are a hell of a piece. That should cool things off on the discharge side. You mounting the water tank in that spacious trunk?

[ibstrokin]

I'm waiting on the cage pics!!:bigthumb

Check page 3

[ibstrokin]

Cool! That's wild there were two of those things at the swap meet. They aren't too common, but they are a hell of a piece. That should cool things off on the discharge side. You mounting the water tank in that spacious trunk?

Yeah, it will be a tight fit in the trunk, but it'll fit, one way or the other.:bigthumb

[Rich]

Lets get moving...times a wasting!

[bbfstanger]

never seen it run ,hope you get it out this year!
congrats on the igloo i knew you were lookin for one

[Rick93coupe]

Someone needs to sneak over and kidnap his PS3 controller, that's about the only way that car will see the sun next yr!
:booty: :wave:

[ibstrokin]

DICK!!! :flipoff:

You need to slow down on the haterade:flipoff:

[ibstrokin]

Someone needs to sneak over and kidnap his PS3 controller, that's about the only way that car will see the sun next yr!
:booty: :wave:

Your a fine one to talk, the only people that have been working on your car in the last four months has been Jason and Charlie:flipoff:

[Rick93coupe]

So uh anyway..... :flipoff:

[chad393na]

Do you need a hand, or maybe some motivation?:lol:

[Rick93coupe]

Perhaps a kick in the nutz?

[chad393na]

Lets play a game of Roshambull, me first:D

[91boost]

Your a fine one to talk, the only people that have been working on your car in the last four months has been Jason and Charlie:flipoff:
The ball will be in his court this weekend:lol:

[Rick93coupe]

The ball will be in his court this weekend:lol:


Your a fine one to talk, the only people that have been working on your car in the last four months has been Jason and Charlie:flipoff:

Touche motha@#$% :lol:

[93hulk]

You need to slow down on the haterade:flipoff:



Just for that I hope you have to cut a big ass hole in your hood!:flipoff:

[Rick93coupe]

Brian is having some trouble with his photobucket account. :tard: So I'm helping him out for you guys.

Enjoy, he's got some cool stuff!





IMG]http://i172.photobucket.com/albums/w23/Ibstrokin/mustangpics004.jpg[/IMG]

[Rick93coupe]

http://i172.photobucket.com/albums/w23/Ibstrokin/mustangpics005.jpg

http://i172.photobucket.com/albums/w23/Ibstrokin/mustangpics007.jpg

http://i172.photobucket.com/albums/w23/Ibstrokin/mustangpics008.jpg

http://i172.photobucket.com/albums/w23/Ibstrokin/mustangpics009.jpg

[Rick93coupe]

http://i172.photobucket.com/albums/w23/Ibstrokin/mustangpics012.jpg

http://i172.photobucket.com/albums/w23/Ibstrokin/mustangpics011.jpg

http://i172.photobucket.com/albums/w23/Ibstrokin/mustangpics013.jpg

http://i172.photobucket.com/albums/w23/Ibstrokin/mustangpics014.jpg

http://i172.photobucket.com/albums/w23/Ibstrokin/mustangpics015.jpg

http://i172.photobucket.com/albums/w23/Ibstrokin/mustangpics016.jpg

http://i172.photobucket.com/albums/w23/Ibstrokin/mustangpics017.jpg

http://i172.photobucket.com/albums/w23/Ibstrokin/mustangpics018.jpg

http://i172.photobucket.com/albums/w23/Ibstrokin/mustangpics019.jpg

[Rick93coupe]

http://i172.photobucket.com/albums/w23/Ibstrokin/mustangpics020.jpg

http://i172.photobucket.com/albums/w23/Ibstrokin/mustangpics021.jpg

http://i172.photobucket.com/albums/w23/Ibstrokin/mustangpics022.jpg

http://i172.photobucket.com/albums/w23/Ibstrokin/mustangpics024.jpg

http://i172.photobucket.com/albums/w23/Ibstrokin/mustangpics025.jpg

http://i172.photobucket.com/albums/w23/Ibstrokin/mustangpics026.jpg

http://i172.photobucket.com/albums/w23/Ibstrokin/mustangpics027.jpg

http://i172.photobucket.com/albums/w23/Ibstrokin/mustangpics028.jpg

http://i172.photobucket.com/albums/w23/Ibstrokin/mustangpics029.jpg

http://i172.photobucket.com/albums/w23/Ibstrokin/mustangpics030.jpg

[Rick93coupe]

http://i172.photobucket.com/albums/w23/Ibstrokin/mustangpics031.jpg

http://i172.photobucket.com/albums/w23/Ibstrokin/mustangpics032.jpg

http://i172.photobucket.com/albums/w23/Ibstrokin/mustangpics033.jpg

http://i172.photobucket.com/albums/w23/Ibstrokin/mustangpics034.jpg

http://i172.photobucket.com/albums/w23/Ibstrokin/mustangpics035.jpg

http://i172.photobucket.com/albums/w23/Ibstrokin/mustangpics036.jpg

http://i172.photobucket.com/albums/w23/Ibstrokin/mustangpics037.jpg

http://i172.photobucket.com/albums/w23/Ibstrokin/mustangpics038.jpg

[Rick93coupe]

http://i172.photobucket.com/albums/w23/Ibstrokin/mustangpics039.jpg

http://i172.photobucket.com/albums/w23/Ibstrokin/mustangpics040.jpg

http://i172.photobucket.com/albums/w23/Ibstrokin/mustangpics041.jpg

http://i172.photobucket.com/albums/w23/Ibstrokin/mustangpics042.jpg

http://i172.photobucket.com/albums/w23/Ibstrokin/mustangpics006.jpg

Just in case you guys get any ideas...

:nono: :AR15:

http://i172.photobucket.com/albums/w23/Ibstrokin/mustangpics043.jpg

[1992MustangDW]

holy crap, would love to have all of that under my x-mas tree

[Rick93coupe]

For some reason one of the brackets around the link for the first pic disappeared, so here it is again.

http://i172.photobucket.com/albums/w23/Ibstrokin/mustangpics003.jpg

[92coupe]

So what your saying is, If he steps away from his PS3 his car will go FAST!!!

[ibstrokin]

Rick had to post some pics for me, photobucket wasn't working. The igloo core is out being repaired, and I have a Holley lower (for the igloo )on the way. The tranny is a lentech. The heads are Trick Flow and have extensive port work. The intake is a Holley, and has been ported through and welded back, and are a matched set with the heads.

The headers are Kook's 1-7/8" to 2" stepped, with 3.5" Bullets, should be loud, I may change that around to quite it down. The fuel rails are Behind Bars Race Cars.

Ray @ Precision did the cage, which is awesome, I have no problem trusting my life with his work. And the top still works like a champ. The car wasn't square at all, after the cage was installed, the doors close like a new one, so that tells me how much the cage is working just sitting still. The cage is Chrome moly also.

I have a complete black interior to go back in it. The injectors are 83's, and the Comp. system is a Ford Epic. I would like to step up to a Accel Gen 7, we'll see.

The engine is a Boss Block 331, which uses the same rotating assembly that was in my Mexican Block. It consists of an Eagle steel crank, H-beams with upgraded rod bolts, J.E. pistons, assembled by Georges Speed Shop.

[93 coupe]

Seems like I've seen alot of those parts before. :D

[Maximus]

That is going to be one vert BAD ASS Vert!!:bigthumb

[replicobra]

can't wait to see it done, buddy.

[poncho2001]

So when does the assembly party start?

[93hulk]

So when does the assembly party start?


You mean when does the drinking start!!:lol:

[Silver Bullet]

Nice! I have some even bigger exhaust for you if you want it.;)

[Maximus]

Any updates?

[ibstrokin]

Not really, Ray still has my core for the igloo, he's going to test/repair any leaks.

[ibstrokin]

Well I finally turned a few wrenches tonight. Mark came over and we swapped out my lower control arms. I switched from mega-bite jr.'s to a set of Team Z tubular/adjustable lowers. The Team Z lower's are actually 10 lbs. lighter (as a set) than the mega-bite's.

Hopefully I get my return tomorrow, Then I'll have a few new toys coming.

[93hulk]

We need to get cracken and get this beast together. Oh yeah, what did you order from Cincy today ole buddy?;)

[ibstrokin]

I got a set of underdrive pullies, a set of split fire's, and a tornado air difuser( supercharge any car), This thing is going to be BADASS!!!!!!!











Just Kidding, Craig hooked me up with a Great Deal on a new FAST XFI system, w/a Fast dual sync dizzy, harness's and sensors. This should make the tune much more accurate, and I won't have to deal with mass air meter placement. Plus I'll be able to datalog.

Thanks again Craig.

[Maximus]

No problem Brian. Thank you for the business.:)

Is it done yet??:bigthumb

[ibstrokin]

Here's a few pics of my new toy from Cincy Speed. Thanks again Craig.

http://i172.photobucket.com/albums/w23/Ibstrokin/Fastsystem001.jpg

http://i172.photobucket.com/albums/w23/Ibstrokin/Fastsystem001.jpg

http://i172.photobucket.com/albums/w23/Ibstrokin/Fastsystem003.jpg

http://i172.photobucket.com/albums/w23/Ibstrokin/Fastsystem004.jpg

http://i172.photobucket.com/albums/w23/Ibstrokin/Fastsystem005.jpg

[Rick93coupe]

So, how's the car coming along? It's going to be awfully hard to bust your ass when your still on jackstands this summer. :yup:

[Kwik92GT]

So, how's the car coming along? It's going to be awfully hard to bust your ass when your still on jackstands this summer. :yup:

Oh $hit. LOL :boxing:

Seriously, we need to get the Mafia over there and cut loose on it. Unless you plan on letting Rick talk junk all year. :nono:

[Maximus]

Any updates??

[ibstrokin]

Here you go Craig (Metcalf), still no progress.

[Kwik92GT]

OK, just read through this whole thread again. Had forgotten how many parts you bought and have laying around to be put on/assembled. All BS aside, what's it going to take to get you wrenching on this again? I have limited time but I'm willing to wrench/help, whatever.

This is going to be a baaad bitch. :bigthumb

[ibstrokin]

Desire, and I just don't have any right now. It doesn't seem to interest me like it used to. And honestly, the more people try to motivate me, the less desire I have to do anything to it. I think I just came to a point were it's just seems like a lot of money and time for little reward.

[JASON408]

wow is this car even still around ??????

[Kwik92GT]

Desire, and I just don't have any right now. It doesn't seem to interest me like it used to. And honestly, the more people try to motivate me, the less desire I have to do anything to it. I think I just came to a point were it's just seems like a lot of money and time for little reward.

Hard to have any kind of "reward" though if its not running. :cool2:

That's cool though, won't mention it again.

[Rick93coupe]

And honestly, the more people try to motivate me, the less desire I have to do anything to it.

What a cop out, "stop asking me about my car and maybe I'll do something with it". :rolleyes:

Love ya like a brother! :D

[bbfstanger]

when nobody asked about it nothing got done either!
try again lol!

[ibstrokin]

Trust me, I'm asked about it a lot.

[Mustard]

man if you have a car for as long as you have had that vert sooner or later you get burned out on it.

[evil8]

Is this finished??