5.0calypso93lx
09-08-2007, 06:13 PM
I've got a 00' Cobra R spec T-56 6 speed transmission for sale. This transmission is like new, and only has about 2,000 miles on it. This trans has the desireable 2.97 first gear compared to the 2.66 1st gear like in the 03/04 Cobra's. Here are the specs on the transmission:
This is the same Tremec HD 6-speed manual transmission used in the 2000 Cobra “R†and the Ford Racing FR500 Mustang
Fits 4.6L SOHC/DOHC engines
Can be used in 1999-04 Mustangs and Cobras
May require shorter driveshaft, modified crossmember/trans mount and other minor modifications
440 lbs./ft. torque capacity
Gear ratios: 1st 2.97, 2nd 2.07, 3rd 1.43, 4th 1.00, 5th .80, 6th .62
Does not have mechanical speedometer connection needed for use in earlier Mustangs
10 spline input, 31 spline output
2003-04 Cobras require changing 28 spline yoke to 31 spline
This will also work with 96-98 mustangs with the abbott speedo conversion kit. It will also work with foxes and 94-95's with the Mcleod bellhousing and adapter plate, and other misc. things needed to make the swap work.
I also have a Spec Stage 3 clutch, and a Steeda Tri Ax shifter for this transmission.
I'm purchasing my first home, so that is a bigger priority over the mustang right now.
I would like to get $1900 for the setup or would also consider a partial trade on another Tremec or other non T5 transmission for a fox body.
This is the same Tremec HD 6-speed manual transmission used in the 2000 Cobra “R†and the Ford Racing FR500 Mustang
Fits 4.6L SOHC/DOHC engines
Can be used in 1999-04 Mustangs and Cobras
May require shorter driveshaft, modified crossmember/trans mount and other minor modifications
440 lbs./ft. torque capacity
Gear ratios: 1st 2.97, 2nd 2.07, 3rd 1.43, 4th 1.00, 5th .80, 6th .62
Does not have mechanical speedometer connection needed for use in earlier Mustangs
10 spline input, 31 spline output
2003-04 Cobras require changing 28 spline yoke to 31 spline
This will also work with 96-98 mustangs with the abbott speedo conversion kit. It will also work with foxes and 94-95's with the Mcleod bellhousing and adapter plate, and other misc. things needed to make the swap work.
I also have a Spec Stage 3 clutch, and a Steeda Tri Ax shifter for this transmission.
I'm purchasing my first home, so that is a bigger priority over the mustang right now.
I would like to get $1900 for the setup or would also consider a partial trade on another Tremec or other non T5 transmission for a fox body.