1/4 mile?

[facemelter71]

In your guy's opinion,
With a 60 foot of 2.02.What would be a good figure for the quater mile time.

[5.0calypso93lx]

In your guy's opinion,
With a 60 foot of 2.02.What would be a good figure for the quater mile time.

Umm, completely depends on the car. My car went 13.89 on a 2.01 60 foot with a stock motor w/ bolt ons.

[mustangrfast88]

anywhere between a 13.6-14.90 imean theres alot more to a 1/4 mile run then a 60 foot time

[Kevin Doe]

14.01-14.06 most likely. Definately in that range.

[mustangrfast88]

it also depends on the cars setup too

[facemelter71]

Yea i know my car is slackin on the top end.she pulls hard through 1-2,then sluffs off at the big end of the track.Im not vary happy.Its needs the d.s.s. engine i got but its not done.2.02 and a 14.7 to show for it.haha.

[mustangboy]

You need alot more info to answer that question. There alot of turbo cars that leave really soft but then pull like a freight train on the big end. You really need to give the specs of your car like engine, suspension, tranny, tire type and size, launch rpm etc etc.

[facemelter71]

Well it is a convertible with some ungodly rollbar some kid installed.it prolly weighs about as much as a small herd of goats.

[facemelter71]

bolt ons,86 speed density.tremec 5 speed.slicks.at 5000 rpm launch hopin it would scatter.hahaha

[Kevin Doe]

You guys are all wrong, I have no idea what you are basing your numbers on, but my extensive racing experience says 14.01-14.06. And I'm never wrong when it comes to mustangs and drag racing.

[5.0calypso93lx]

bolt ons,86 speed density.tremec 5 speed.slicks.at 5000 rpm launch hopin it would scatter.hahaha

5000 rpm launch on slicks and its only cutting a 2.02 60 foot? Something doesn't sound right, what kind of suspension?

What's it trapping?

[5.0calypso93lx]

You guys are all wrong, I have no idea what you are basing your numbers on, but my extensive racing experience says 14.01-14.06. And I'm never wrong when it comes to mustangs and drag racing.

:lol::lol: I guess I'm basing my numbers off of what I did a couple weekends ago???:lol::flipoff:

[mustangrfast88]

yeah i was going to say i looked threw all my time slips and thats what i got and ok what if i cut a 1.847 60 foot and after that the car had issues and ran a 15.236 so i mean you can cut a good 6 foot and have issues down track and run a bad time

[5.0calypso93lx]

yeah i was going to say i looked threw all my time slips and thats what i got and ok what if i cut a 1.847 60 foot and after that the car had issues and ran a 15.236 so i mean you can cut a good 6 foot and have issues down track and run a bad time

Exactly, and that can go the opposite way as well, you can cut a "bad" 60 foot, and pull like a freight train on the top end, and you'll also get some crazy mph. That, again, is why I HATE when people compare traps. Back when I made my first couple passes with the car, I was trapping 100-101, but now that I'm getting my 60 foots down, my mph came down almost 3 mph on my best e.t. run. To me, that's what matters in the end.

[mustangrfast88]

yeah i agree but the guy ran a 14.70 and was just woundering what a 2.02 60 should put him and like you said you can have a hell of a 60 foot and good time or a shitty 60 foot and pull hard on the top end

[Silver Bullet]

I agree with mustangboy..... a lot depends on it. I have ran on street tires, pulled 2.XX and still ran low 11's easily.

[facemelter71]

uh let me get my slip again,
car to my left. me.
r.t-1.201 .809
60-2.261 2.026
330-6.241 6.121
1/8-9.428 9.470
mph-77.30 74.08
1000-12.138 12.353
1/4-14.397 14.788
mph-100.01 93.01
This was at tristate,and i believe on street tires.no it was slicks.yea i had them then.

[facemelter71]

Edge water i ran like a 1.90 60 and still it was 14.7.I should bracket race.
:lol:

[bcoh5gt]

You guys are all wrong, I have no idea what you are basing your numbers on, but my extensive racing experience says 14.01-14.06. And I'm never wrong when it comes to mustangs and drag racing.

I am holding a timeslip in my hand with a 2.017 60' @13.423 @104.94mph. Trying to go off of a 60' to figure a 1/4 time is retarded.

[mustangkid]

I run 14.3's with a 2.2's and 2'3s 60 foot

[Goober]

I am holding a timeslip in my hand with a 2.017 60' @13.423 @104.94mph. Trying to go off of a 60' to figure a 1/4 time is retarded.:bigthumb You got it right there. All 60' tells you is how well your getting out of the hole.