15x10 RIM 3" Backspacing. Need 1 to try...

[Silver Bullet]

I need to see if a 15x10 and a 3" backspacing will work with my combo, does anyone have one or something similiar I could try?

Thanks in advance....

[Silver Bullet]

Anybody even have anything close? Maybe a 15X8 with a 3 or 3.5 or 4" b.s.?:confused:

[mustangboy]

Just go ahead and mini tub it already.:lol:

[5.0calypso93lx]

Thats gonna be one sucked in wheel!

[mustangboy]

His rear is narrowed 3" per side.

[5.0calypso93lx]

His rear is narrowed 3" per side.

Would that not make it even worse??

[93 coupe]

I have a 15x10 Bogart with 4" bs if that will help you.

[5.0calypso93lx]

I have a 15x10 Bogart with 4" bs if that will help you.

Is this on a fox? I have been wanting to try a set of 15x10 bog's for a while on my car now to see if they will clear the brakes. 4 or 5 lug??

[331TwistedWedge]

man i would love to go 17x10, deep dish bullets (on the rear) & stagger them with 17x9 or 17x8 in the front ... i've heard its been done with the right backspacing ...

[mustangboy]

Would that not make it even worse??

That is why he is looking for a wheel w/ approx a 3" backpace.



I have a 15x10 Bogart with 4" bs if that will help you.

I'm sure he would love to try them just to double check fitment even though they still proabably won't fit. They will be close though.




Is this on a fox? I have been wanting to try a set of 15x10 bog's for a while on my car now to see if they will clear the brakes. 4 or 5 lug??

The Bogarts are currently on a 95 stang w/ a narrowed rear. Terry has a 5 lug fox car that has lug strange brakes on the rear and is narrowed 3in per side. So they wont even come close to fitting on a stock width rearend. They would stick out about 2" from your wheel wells.

[Rob]

Hey Terry, I set up a 9" wheel with a 6" backspacing perfectly centered in the wheel tub, then narrowed your rearend 3". So now you would need a 9" wheel with a 3" back spacing to have it sitting in the exact location, correct? The 9" wheel was sitting under the car a couple of inches inside the fender so a 10" wide wheel will be perfect! I did this so you would be able to tub the car in the future and go with a 12" wheel and 5" backspacing without building another rearend. Good luck, If you need any help just ask. :bigthumb

[Timido]

If you find a wheel that is close in offset you could put it out a little with a little wheel spacer.

[blk93notch]

i have 2 15x10 rims that look like draglites. 5 lug big ford bolt pattern. 4 " back spacing if they help ya

[Silver Bullet]

i have 2 15x10 rims that look like draglites. 5 lug big ford bolt pattern. 4 " back spacing if they help ya

Sounds good..... I will PM you....




I have a 15x10 Bogart with 4" bs if that will help you.

Are the 4 or 5 lug?


Rob, anytime you want to stop over and take a look, feel free! You can also show me whats up and how to use the FAST system. :D

[Rob]

Rob, anytime you want to stop over and take a look, feel free! You can also show me whats up and how to use the FAST system. :D[/QUOTE]

Sounds good :bigthumb

[blk93notch]

you have a pm.