boosted 98
07-08-2007, 11:35 AM
its a 358 windsor its a 69 blockhead stude main studs scat forged race crank corilla h beam rods trw forged 10.5 compression pistons sealed power rings comp solid roller 627 lift i have cam card for details, 1.6 or 1.7 roller rockers i let a friend use the ones on it and havent got them back so i will buy a new set and size of your choice. morroso oil pump and arp oil pump shaft,the heads are victor jr with huge valve spring for the cam fully ported.i had bischoff flow them and they flowed 328 at 6.5ish i have flow charts as well they also mached the victor jr intake to the heads. its got a nice set of valvecovers canton oil pan for a fox moroso electric water pump march pully setup powerforce plus race dampner and a bullit steel flywheel also a power starter starter motor motor is ballanced to 52oz.carb is a king demon with anullar squirters k/n filter with k/n top msd billit distributor and msd 6al box 9 mm wires motor is set up for nitrous i also have a kit for this motor 300 shot complete plate system with haus low fuel shut off switch.i will be willing to split a dyno with you to varify power. i will trow in my tranny its a new broke world class with a spec stage 3 cluch,cluch is almost new just a couple of runs on it than tranny broke and a fuel system for the nitrous a holly blue pump with number 8 earls line and fittings and a new system one filter and a 5 gallon fuel cell. $6,000 for everything