Need parts for the PINKS car ASAP

[89notch]

Need these ASAP the car has to be completed before July 14th and these are some of the things we are lacking. We have some credit at cincy speed but if you dont have any of these but want to help donations can be made at cincy speed.

Throttle Cable

Throttle Bracket

Wheels Tires 15x10 with 6.5 back spacing and skinnys for the front new or used

Flexplate need a 28 oz powerglide to SBF

Fuel Rails-Charlie

EGR Delete-Charlie

Meter-Modular Depot

Injectors-Modular Depot

Water Pump-JOE

Alternator Bracket-Kelly

Front Brake pads and hoses- Need them for an 86 SVO need the rubber lines and also the drivers line that goes from the master cylinder to the rubber line

Distributer -351 TFI

Distributer gear-Need to Order at Cincy

Cap and Rotor

Plug Wires

Boost Gauge

Oil Pressure Gauge

Zus fastners-need to order from Cincy

Rubber valve cover gaskets

MSD 6AL box

Let me know if you can help

[mustangboy]

I have a brand new in the package MSD distributor cap. I'll get the part # in the morning so you can see if it will be the one you can use. I believe it is the smaller style which is what I had on a 351w I had at one time.

[89notch]

I have a brand new in the package MSD distributor cap. I'll get the part # in the morning so you can see if it will be the one you can use. I believe it is the smaller style which is what I had on a 351w I had at one time.

Thanks just let me know

[mustangboy]

Hey Kelly that part# is msd-8431. I believe it only fits a msd pro billet dizzy but if you guys need it, it is yours.

[quik lx]

I have a Phantom 2 5/8 oil press gauge w/ sender (electric):D

[89notch]

Cool thanks Joe also give me a call

[92coupe]

Kelly i have an accell dizzy cap and rotor for 5.0 efi dist.
will that work for you?

[93hulk]

Kelly i have an accell dizzy cap and rotor for 5.0 efi dist.
will that work for you?

Sure will!:cool1:

[Sharad]

Kelly,

I have a stock 351 TFI distributor, complete, in good shape. It's got the steel gear because it was on a hydraulic roller cam. It's not an MSD, but it's yours if you want it. You know my number.

[dedpedal]

Kelly, I have a set of rubber valve cover gaskets I can toss at you. Ill try to get them to cincy speed, but it would be great if someone could pick them up here.

[BlazinEagle]

I have a set of new moroso fastners. I think they are zus fasteners but not sure.
Part number 71500 and 71552.
here is a pic? If they are what you need I can mail them your way or someone can pick them up. I live in Colerain by Rumpke.
-Rodney

[89notch]

Can everyone drop this stuff off at Cincy speed for me ASAP. Or I can try to pick some of it up. We are getting down to crunch time and need this stuff as soon as possible. I think I'm going to cincy speed tomorrow afternoon to pick up a few things

[BlazinEagle]

I cannot drop them off until after 4pm. If someone can pick them up from my job at Walgreens at 5403 North Bend Road. I can take them with me?
-Rodney

[BlazinEagle]

If no-one can take them to cincy speed in the morning I will run them up to carlisle.

[Timido]

Kelly there is a alternator and starter in your garage that I brought up from Cincy Speed. They are in a box.

[black90lx]

i got a 2 1/16 phantom boost/vacumm gauge i will dig it out and bring it to you tomorrow.i think it is 30vac/30boost

[89notch]

Cool thanks

[Timido]

Get off the Computor and get to work on the car!!!! You dont have to go to Cincy Speed I will stop on the way up.

[plated]

i'm headed up this morning to kelly's to help out:)

[BlazinEagle]

Timido did you stop by Cincy speed and pick up the Zus fasteners that I dropped off this morning.

[Timido]

Yes I did thanks for your support!

I took up a Box of goodies!